prEN ISO 18064

Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO/DIS 18064:2021)

Thermoplastische Elastomere - Nomenklatur und Kurzzeichen (ISO/DIS 18064:2021)

Dieses Dokument legt ein Nomenklatursystem für thermoplastische Elastomere auf der Grundlage der chemischen Zusammensetzung des bzw. der betreffenden Polymere fest. Die Norm definiert die zum Identifizieren thermoplastischer Elastomere in der Industrie, im Handel und auf Regierungsebene verwendeten Symbole und Kurzzeichen. Ziel ist es nicht, mit bestehenden Handelsnamen und (geschützten) Warenzeichen in Konflikt zu kommen, sondern diese zu ergänzen.
ANMERKUNG 1 In technischen Dokumenten und Präsentationen sollte der Name des thermoplastischen Elastomers gefolgt von dem in diesem Dokument zum Bezeichnen des Elastomers verwendeten Kurzzeichen verwendet werden.
ANMERKUNG 2 Anhang A gibt Kurzzeichen für thermoplastische Elastomere an, die in der Vergangenheit in Werkstoffnormen, technischen Bulletins, Lehrbüchern, Patenten und der Fachliteratur verwendet wurden.

Élastomères thermoplastiques - Nomenclature et termes abrégés (ISO/DIS 18064:2021)

Plastomerni elastomeri - Nomenklatura in okrajšave (ISO/DIS 18064:2021)

General Information

• Status: Not Published
• ICS: 01.040.83 - Rubber and plastics industries (Vocabularies)
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: CEN/TC 249 - Plastics
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Due Date: 22-Jun-2021
• Completion Date: 22-Jun-2021
• Ref Project: oSIST prEN ISO 18064:2021 - Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO/DIS 18064:2021)

RELATIONS

• Revised: EN ISO 18064:2014 - Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2014)
• Effective Date: 26-Aug-2020

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN ISO 18064:2021
01-junij-2021
Plastomerni elastomeri - Nomenklatura in okrajšave (ISO/DIS 18064:2021)

Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO/DIS 18064:2021)

Thermoplastische Elastomere - Nomenklatur und Kurzzeichen (ISO/DIS 18064:2021)

Élastomères thermoplastiques - Nomenclature et termes abrégés (ISO/DIS 18064:2021)

Ta slovenski standard je istoveten z: prEN ISO 18064
ICS:
01.040.83 Gumarska industrija in Rubber and plastics
industrija polimernih industries (Vocabularies)
materialov (Slovarji)
83.080.20 Plastomeri Thermoplastic materials
oSIST prEN ISO 18064:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 18064:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 18064:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 18064
ISO/TC 45 Secretariat: DSM
Voting begins on: Voting terminates on:
2021-03-30 2021-06-22
Thermoplastic elastomers — Nomenclature and
abbreviated terms
Élastomères thermoplastiques — Nomenclature et termes abrégés
ICS: 01.040.83; 83.080.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 18064:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 18064:2021
ISO/DIS 18064:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 18064:2021
ISO/DIS 18064:2021(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Nomenclature system ...................................................................................................................................................................................... 1

5 Categories of thermoplastic elastomer ......................................................................................................................................... 2

5.1 TPA .................................................................................................................................................................................................................... 2

5.2 TPC .................................................................................................................................................................................................................... 2

5.3 TPO .................................................................................................................................................................................................................... 2

5.4 TPS ..................................................................................................................................................................................................................... 2

5.5 TPU .................................................................................................................................................................................................................... 2

5.6 TPV .................................................................................................................................................................................................................... 2

5.7 TPZ ..................................................................................................................................................................................................................... 2

6 Materials in each TPE category ............................................................................................................................................................. 2

6.1 TPA .................................................................................................................................................................................................................... 2

6.2 TPC .................................................................................................................................................................................................................... 3

6.3 TPO .................................................................................................................................................................................................................... 3

6.4 TPS ..................................................................................................................................................................................................................... 3

6.5 TPU .................................................................................................................................................................................................................... 3

6.6 TPV .................................................................................................................................................................................................................... 4

6.7 Miscellaneous material (TPZ) .................................................................................................................................................... 4

Annex A (informative) Formerly used abbreviated terms ............................................................................................................. 5

© ISO 2021 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 18064:2021
ISO/DIS 18064:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products.

This third edition cancels and replaces the second edition (ISO 18064:2014), which has been technically

revised.
The main changes compared to the previous edition are as follows:
— Inclusion of TPO co-polymers
— Differentiation between single polymers and compounds
— Unification of expressions

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 18064:2021
ISO/DIS 18064:2021(E)
Introduction

Thermoplastic elastomers combine many of the attributes and features of both vulcanized thermoset

rubber and thermoplastic materials. It is, therefore, important that any system of classification and

nomenclature for this rapidly expanding polymer sector should be acceptable to both the rubber

and plastics industries. Neither of the existing International Standards for the nomenclature and

abbreviated terms for rubber (ISO 1629) and for plastics (ISO 1043-1) is suitable for this purpose. The

system in this document has been devised to avoid any conflict of interests or ambiguity, permit the

use of existing terms in the construction of abbreviations for thermoplastic elastomers, and allow for

future developments or expansion.
This document uses established abbreviated terms. Its aim is
...