iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 14453:2014

(Main)

Pulps - Determination of acetone-soluble matter (ISO 14453:2014)

Pulps - Determination of acetone-soluble matter (ISO 14453:2014)

ISO 14453:2014 describes the determination of acetone-soluble matter in pulp.
It is applicable to all types of pulp. The lower limit of the determination is about 0,05 %. This limit can be lowered by increasing the amount of sample analysed.

Faserstoff - Bestimmung acetonlöslicher Bestandteile (ISO 14453:2014)

Diese Internationale Norm legt ein Verfahren zur Bestimmung von acetonlöslichen Bestandteilen in Zellstoff fest.
Sie ist auf alle Sorten von Zellstoffen anwendbar. Die untere Bestimmungsgrenze liegt bei etwa 0,05 %. Dieser Grenzwert kann durch Erhöhen der Menge der zu analysierenden Durchschnittsprobe verringert werden.

Pâtes - Détermination des matières solubles dans l'acétone (ISO 14453:2014)

L'ISO 14453:2014 décrit une méthode de détermination des matières solubles dans l'acétone contenues dans la pâte.
Elle est applicable à tous les types de pâte. La limite inférieure de détermination est d'environ 0,05 %. Il est possible de diminuer cette limite en augmentant le volume de l'échantillon qui est analysé.

Vlaknine - Določevanje v acetonu topne snovi (ISO 14453:2014)

Standard EN ISO 14453 opisuje določevanje v acetonu topne snovi v vlakninah. Uporablja se za vse vrste vlaknin. Spodnja mejna vrednost določevanja je približno 0,05 %. Ta mejna vrednost se lahko zniža s povečanjem količine analiziranega vzorca.

General Information

Status
Published
Publication Date
01-Apr-2014
Withdrawal Date
30-Oct-2014
ICS
85.040 - Pulps
Technical Committee
CEN/TC 172 - Pulp, paper and board
Drafting Committee
CEN/TC 172 - Pulp, paper and board
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
02-Apr-2014
Completion Date
02-Apr-2014
Ref Project
SIST EN ISO 14453:2014 - Pulps - Determination of acetone-soluble matter (ISO 14453:2014)

Relations

Replaces
EN ISO 14453:1998 - Pulps - Determination of acetone-soluble matter (ISO 14453:1997)
Effective Date
25-Jan-2012

Buy Standard

EN ISO 14453:2014EN ISO 14453:2014
PreviousNext
Standard
EN ISO 14453:2014
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14453:2014
01-september-2014
1DGRPHãþD
SIST EN ISO 14453:2000
9ODNQLQH'RORþHYDQMHYDFHWRQXWRSQHVQRYL ,62
Pulps - Determination of acetone-soluble matter (ISO 14453:2014)
Faserstoff- Bestimmung acetonlöslicher Bestandteile (ISO 14453:2014)
Pâtes - Détermination des matières solubles dans l'acétone (ISO 14453:2014)
Ta slovenski standard je istoveten z: EN ISO 14453:2014
ICS:
85.040 Vlaknine Pulps
SIST EN ISO 14453:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14453:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 14453:2014

EUROPEAN STANDARD
EN ISO 14453

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2014
ICS 85.040 Supersedes EN ISO 14453:1998
English Version
Pulps - Determination of acetone-soluble matter (ISO
14453:2014)
Pâtes - Détermination des matières solubles dans l'acétone Faserstoff - Bestimmung acetonlöslicher Bestandteile (ISO
(ISO 14453:2014) 14453:2014)
This European Standard was approved by CEN on 15 February 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14453:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14453:2014
EN ISO 14453:2014 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14453:2014
EN ISO 14453:2014 (E)
Foreword
This document (EN ISO 14453:2014) has been prepared by Technical Committee ISO/TC 6 “Paper, board
and pulps” in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2014, and conflicting national standards shall be withdrawn at
the latest by October 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14453:1998.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14453:2014 has been approved by CEN as EN ISO 14453:2014 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 14453:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 14453:2014
INTERNATIONAL ISO
STANDARD 14453
Second edition
2014-04-01
Pulps — Determination of acetone-
soluble matter
Pâtes — Détermination des matières solubles dans l’acétone
Reference number
ISO 14453:2014(E)
©
ISO 2014

---------------------- Page: 7 ----------------------

SIST EN ISO 14453:2014
ISO 14453:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be r
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 5263-3:2023(Main)
Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at ≥ 85°C (ISO 5263-3:2023)
SIST EN ISO 5263-3:2023

This document specifies an apparatus and the procedures for the laboratory wet disintegration of mechanical pulps that exhibit latency except when brightness is measured. This apparatus and procedure can be used for preparation of the test portion in other International Standards dealing with pulps.
This document is applicable to all kind of mechanical pulps (i.e. mechanical, semi-chemical and chemi-mechanical pulps) exhibiting latency.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 187:2022(Main)
Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:2022)
SIST EN ISO 187:2023

This document specifies the standard atmospheres for conditioning and testing pulp, paper and board, the conditioning procedure and the procedures for measuring the temperature and relative humidity.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5270:2022(Main)
Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2022)
SIST EN ISO 5270:2022

This document specifies the relevant International Standards used for the determination of physical properties of laboratory sheets made of all types of pulps.
It is applicable to laboratory sheets prepared in accordance with ISO 5269‑1, ISO 5269‑2 or ISO 5269‑3.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 638-1:2022(Main)
Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 1: Materials in solid form (ISO 638-1:2022)
SIST EN ISO 638-1:2022

This document specifies an oven-drying method for the determination of the dry matter content in paper, board, pulp and cellulosic nanomaterials in solid form, which all can be produced from virgin and /or recycled materials.
It is also applicable to the determination of the dry matter content of paper and board for recycling.
The procedure is applicable to paper, board, and pulp and cellulosic nanomaterials which do not contain any appreciable quantities of materials other than water that are volatile at the temperature of 105 °C ± 2 °C. It is used, for example, in the case of pulp, paper, and board and cellulosic nanomaterial samples taken for chemical and physical tests in the laboratory, when a concurrent determination of dry matter content is required.
This method is not applicable to the determination of the dry matter content of slush pulp or to the determination of the saleable mass of pulp lots.
NOTE 1    ISO 638-2[1] specifies an oven-drying method for the determination of the dry matter content of suspensions of cellulosic nanomaterials, ISO 287[2] specifies the determination of the moisture content of a lot of paper and board; ISO 4119[3] specifies the determination of stock concentration of pulps; the ISO 801 series[4] specifies the determination of the saleable mass in lots.
NOTE 2    This document determines the total dry matter content of the sample, including any dissolved solids. If only the cellulosic material content free of dissolved solids is desired, dissolved solids are removed prior to measuring the dry matter content, e.g. by washing or dialysis, taking care to retain all cellulosic material; in cases where the sample is filterable without loss of cellulosic solids, ISO 4119[3] can be used to determine the stock consistency (content of cellulosic material in solid form).

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 638-2:2022(Main)
Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2: Suspensions of cellulosic nanomaterials (ISO 638-2:2022)
SIST EN ISO 638-2:2022

This document specifies an oven-drying method for the determination of the dry matter content in suspensions of cellulosic nanomaterials. The procedure is applicable to cellulosic nanomaterial suspensions which do not contain any appreciable quantities of materials other than water that are volatile at the temperature of 105 °C ± 2 °C. It is used, for example, in the case of cellulosic nanomaterial suspensions samples taken for chemical and physical tests in the laboratory, when a concurrent determination of dry matter content is required.
NOTE      This document determines the total dry matter content of the sample, including any dissolved solids. If only the cellulosic material content free of dissolved solids is desired, dissolved solids are removed prior to measuring the dry matter content, e.g. by washing or dialysis, taking care to retain all cellulosic material.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7213:2021(Main)
Pulps - Sampling for testing (ISO 7213:2021)
SIST EN ISO 7213:2022

This document specifies a method of obtaining, for test purposes, a gross sample representative of a certain lot of pulp. This document applies to all kinds of pulp delivered in bales or rolls. It is intended for use when sampling for all kinds of testing purposes except for the determination of saleable mass, in which case other International Standards apply such as ISO 801-1 and ISO 801-2.
If, however, the pulp is to be tested for saleable mass in addition to other properties, the gross sample obtained according to the appropriate International Standard for sampling saleable mass can also be used for the other pulp property tests.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15320:2011(Main)
Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011)
SIST EN ISO 15320:2011

ISO 15320:2011 specifies a test method for the determination of pentachlorophenol (PCP) in an aqueous extract of pulp, paper and board. Although it was developed for paper and board intended to come into contact with foodstuffs, it is applicable to all kinds of pulp, paper and board.
The working range for acetylation is 0,05 mg/kg to 0,5 mg/kg.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5264-2:2011(Main)
Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2011)
SIST EN ISO 5264-2:2011

ISO 5264-2:2011 specifies a method for the laboratory beating of pulp using a PFI mill. The description is limited to the sampling, preparation and beating of the pulp and the beating equipment.
In principle, this method is applicable to all kinds of chemical and semi-chemical pulps. In practice, the method might not give satisfactory results with certain pulps having extremely long fibres.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5350-2:2006(Main)
Pulps - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp by transmitted light (ISO 5350-2:2006)
SIST EN ISO 5350-2:2007

ISO 5350-2:2006 specifies a method for the estimation by transmitted light of the visible dirt and shives in pulp manufactured in sheets. It does not apply to unbleached kraft pulps or to any other sheeted pulps that are too opaque to allow for the estimation of the minimum size or for minimum contrast specks to be counted, in accordance with ISO 5350-2:2006. The maximum grammage for most pulp sheets is in the range 800 g/m2 to 1 000 g/m2.
If the sheets of the mill sheeted pulp have high grammage or are very opaque for other reasons, ISO 5350-1:2006 should be applied.
ISO 5350-2:2006 is not intended for recycled pulp.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5350-1:2006(Main)
Pulps - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets by transmitted light (ISO 5350-1:2006)
SIST EN ISO 5350-1:2007

ISO 5350-1:2006 specifies a method for the estimation by transmitted light of the visible dirt and shives in laboratory sheets prepared from pulp. It is, in principle, applicable to all kinds of pulp, although it is mainly intended for pulp that is not manufactured in sheet form.
ISO 5350-1:2006 can also be applied to mill sheeted pulp, if the sheets have high grammage or are very opaque for other reasons, in which case ISO 5350-2:2006 is not applicable.
ISO 5350-1:2006 is not intended for recycled pulp.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day