Earth-moving machinery - Safety - Part 6: Requirements for dumpers

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to dumpers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for dumpers.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not provide performance requirements for safety related functions of control system(s).
Pedestrian controlled dumpers are excluded from scope of this document.
This document does not deal with the hazards associated with self-loading equipment.
The following significant and relevant hazards are not covered in this document:
—   Transmission of power between self-propelled machinery (or tractor) and recipient machinery;
—   Laser;
—   Lightning.
This document is not applicable to dumpers which are manufactured before the date of publication of this document by CEN.

Erdbaumaschinen - Sicherheit - Teil 6: Anforderungen an Muldenfahrzeuge

Dieses Dokument behandelt zusammen mit EN 474 1:2022 alle signifikanten Gefährdungen, Gefährdungssituationen und ‑ereignisse von Muldenfahrzeugen, wenn diese Maschinen bestimmungsgemäß verwendet werden sowie unter den vernünftigerweise vom Hersteller vorhersehbaren Fehlanwendungen (siehe Anhang A) für die gesamte Lebensdauer der Maschine wie in EN ISO 12100:2010, 5.4, beschrieben betrieben werden.
Die Anforderungen dieses Dokuments gelten ergänzend zu den allgemeinen Anforderungen in EN 474 1:2022. Dieses Dokument wiederholt nicht die Anforderungen in EN 474 1:2022, sondern ergänzt oder ändert diese für den Einsatz von Muldenfahrzeugen.
Dieses Dokument enthält keine Anforderungen an den Hauptstromkreis und den Antrieb, wenn die primäre Energiequelle eine externe Stromversorgung ist.
Dieses Dokument enthält keine Leistungsanforderungen an Sicherheitsfunktionen von Steuerungssystemen.
Mitgängergeführte Muldenfahrzeuge sind vom Anwendungsbereich dieses Dokuments ausgenommen.
Dieses Dokument behandelt keine Gefährdungen in Bezug auf Selbstladeeinrichtungen.
Die folgenden signifikanten und relevanten Gefährdungen werden in diesem Dokument nicht behandelt:
—   Kraftübertragung zwischen einer selbstfahrenden Maschine (oder einer Zugmaschine) und einer angetriebenen Maschine;
—   Laserstrahlung;
—   Blitzschlag.
Dieses Dokument ist nicht anwendbar für Muldenfahrzeuge, die vor der Veröffentlichung dieses Dokuments durch CEN hergestellt wurden.

Engins de terrassement - Sécurité - Partie 6 : Prescriptions applicables aux tombereaux

Le présent document associé à l’EN 474 1:2022 traite de tous les phénomènes dangereux significatifs, situations dangereuses et événements se rapportant aux tombereaux, lorsqu'ils sont utilisés normalement et dans les conditions prévues, mais en tenant également compte des mauvais usages raisonnablement prévisibles (voir Annexe A), associés à toute la durée de vie de l'engin, comme décrit dans l'EN ISO 12100:2010, 5.4.
Les prescriptions du présent document viennent en complément des prescriptions communes présentées dans l’EN 474 1:2022. Le présent document ne répète pas les prescriptions du EN 474 1:2022, mais complète ou modifie les prescriptions pour les tombereaux.
Le présent document ne spécifie aucune prescription relative aux circuits électriques principaux et aux commandes des engins lorsque la principale source d'énergie est une alimentation électrique externe.
Le présent document ne spécifie aucune prescription de performance relative aux fonctions de sécurité du (des) système(s) de commande.
Les tombereaux à opérateur accompagnant sont exclus du domaine d'application du présent document.
Le présent document ne traite pas des phénomènes dangereux associés aux dispositifs autochargeurs.
Les phénomènes dangereux significatifs et pertinents suivants ne sont pas couverts par le présent document :
—   transmission de puissance entre la machine automotrice (ou le tracteur) et la machine réceptrice ;
—   laser ;
—   foudre.
Le présent document n'est pas applicable aux tombereaux fabriqués avant la date de publication du présent document par le CEN.

Stroji za zemeljska dela - Varnost - 6. del: Zahteve za prekucnike

Ta dokument skupaj s 1. delom obravnava vsa večja tveganja za stroje za zemeljska dela – prekucnike, kadar se uporabljajo v skladu s predvidenim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec, v zvezi s celotno življenjsko dobo stroja (glej točko 4).
Zahteve iz tega dela dopolnjujejo splošne zahteve iz standarda
prEN 474-1. Ta dokument ne navaja ponovno zahtev iz standarda prEN 474-1, temveč dodaja ali nadomešča zahteve za uporabo strojev za zemeljska dela – prekucnikov.
Ta dokument se ne uporablja za prekucnike, izdelane pred datumom izdaje tega evropskega standarda s strani Evropskega odbora za standardizacijo (CEN).
Ta del ne navaja ponovno zahtev iz standarda prEN 474-1:2017, temveč dodaja ali nadomešča zahteve za uporabo prekucnikov.
Ta del določa ustrezne tehnične ukrepe za odpravo ali zmanjšanje večjih tveganj, nevarnih situacij in nevarnih dogodkov med usposabljanjem za zagon, obratovanjem in vzdrževanjem prekucnikov.
Prekucniki, upravljani s tal, ne spadajo na področje uporabe tega evropskega standarda.
Ta evropski standard se ne uporablja za prekucnike, izdelane pred datumom izdaje tega evropskega standarda s strani Evropskega odbora za standardizacijo (CEN).

General Information

Status
Published
Publication Date
29-Mar-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
30-Mar-2022
Due Date
25-May-2019
Completion Date
30-Mar-2022

Relations

Buy Standard

Standard
EN 474-6:2022
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 474-6:2017
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 474-6:2022
01-maj-2022
Nadomešča:
SIST EN 474-6:2007+A1:2009
Stroji za zemeljska dela - Varnost - 6. del: Zahteve za prekucnike
Earth-moving machinery - Safety - Part 6: Requirements for dumpers
Erdbaumaschinen - Sicherheit - Teil 6: Anforderungen für Muldenfahrzeuge
Engins de terrassement - Sécurité - Partie 6 : Prescriptions applicables aux tombereaux
Ta slovenski standard je istoveten z: EN 474-6:2022
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN 474-6:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 474-6:2022

---------------------- Page: 2 ----------------------
SIST EN 474-6:2022


EN 474-6
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2022
EUROPÄISCHE NORM
ICS 53.100 Supersedes EN 474-6:2006+A1:2009
English Version

Earth-moving machinery - Safety - Part 6: Requirements
for dumpers
Engins de terrassement - Sécurité - Partie 6 : Erdbaumaschinen - Sicherheit - Teil 6: Anforderungen
Prescriptions applicables aux tombereaux für Muldenfahrzeuge
This European Standard was approved by CEN on 14 February 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 474-6:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 474-6:2022
EN 474-6:2022 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Safety requirements and/or protective/risk reduction measures . 8
4.1 General . 8
4.2 Operator’s station . 8
4.3 Seat . 9
4.4 Operator’s controls and indicators . 9
4.5 Steering system. 10
4.6 Brake systems for travelling . 10
4.7 Visibility . 10
4.8 Stability . 11
4.9 Travel speed fo
...

SLOVENSKI STANDARD
oSIST prEN 474-6:2017
01-junij-2017
Stroji za zemeljska dela - Varnost - 6. del: Zahteve za prekucnike
Earth-moving machinery - Safety - Part 6: Requirements for dumpers
Engins de terrassement - Sécurité - Partie 6: Prescriptions applicables aux tombereaux
Ta slovenski standard je istoveten z: prEN 474-6
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
oSIST prEN 474-6:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 474-6:2017

---------------------- Page: 2 ----------------------
oSIST prEN 474-6:2017


DRAFT
EUROPEAN STANDARD
prEN 474-6
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2017
ICS 53.100 Will supersede EN 474-6:2006+A1:2009
English Version

Earth-moving machinery - Safety - Part 6: Requirements
for dumpers
Engins de terrassement - Sécurité - Partie 6:
Prescriptions applicables aux tombereaux
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 151.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 474-6:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 474-6:2017
prEN 474-6:2017 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 List of additional significant hazards . 6
5 Safety requirements and/or measures . 6
5.1 General . 6
5.2 Dump body . 6
5.2.1 Control device . 6
5.2.2 Body lowering . 6
5.2.3 Body lowering shall be possible without the use of special tools. Body down
indicator .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.