EN IEC 60335-2-75:2023
(Main)Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
IEC 60335-2-75:2012 deals with the safety of electric commercial dispensing appliances and vending machines for preparation or delivery of food, drinks and consumer products, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances that are within the scope of this standard are bulk tea or coffee brewing machines, cigarette vending machines, coffee grinders, commercial liquid heaters, coffee makers with or without integrated coffee grinder, coffee makers with cooling systems, hot and cold beverage vending machines, hot water dispensers, ice cream and whipped cream dispensers, ice dispensers, newspaper, audio or video tape or disc vending machines, packaged food and drink vending machines and refrigerated merchandisers. Appliances can have more than one function. Other standards may be applicable for some functions such as refrigeration (IEC 60335-2-24) and heating by microwaves (IEC 60335-2-25). This standard also deals with the hygiene aspects of appliances. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by users and maintenance persons. However, in general, it does not take into account young children playing with the appliance. This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). It constitutes a technical revision. The principal changes in this edition as compared with the second edition of IEC 60335-2-75 are as follows: some notes have been deleted or converted to normative text (5.2, 5.6, 5.104, 7.12.1, 7.12.101.1, 11.2, 11.8, 15.2.103, 15.2.104, 15.2.106, 15.2.109, 15.2.111, 19.102, 19.6, 19.13, 19.101, 22.6, 22.7, 22.112, 22.113, 22.114, 24.102, 27.2), added requirements for espresso coffee makers in 3.115, 22.114 and throughout standard, modified 11.4 to address heating appliances with electronic process controls and 11.6 to address combined appliances without electronic process controls, modified Clause 22 to indicate that pressure regulating devices are to be rendered inoperable and deleted ISO 13732-1 from Bibliography. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Vending machines, Dispensers.
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-75: Besondere Anforderungen für Ausgabegeräte und Warenautomaten für den gewerblichen Gebrauch
Appareils électrodomestiques et analogues - Sécurité - Partie 2-75: Exigences particulières pour les distributeurs commerciaux avec ou sans moyen de paiement
La CEI 60335-2-75:2012 traite de la sécurité des distributeurs commerciaux électriques avec ou sans moyen de paiement, destinés à la préparation et à la distribution d'aliments, de boissons et de produits de consommation, leur tension assignée n'étant pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils. Comme exemples d'appareils entrant dans le domaine d'application de la présente norme, on peut citer les machines à thé ou à café en vrac, les distributeurs avec moyen de paiement de cigarettes, les moulins à café, les appareils de chauffage des liquides à usage commercial, les cafetières avec ou sans moulin à café intégré, les cafétières avec système réfrigérant, les distributeurs avec moyen de paiement de boissons chaudes ou froides, les distributeurs d'eau chaude, les distributeurs de crème glacée ou de crème fouettée, les distributeurs de glace, les distributeurs avec moyen de paiement de journaux, de bandes ou disques audio ou vidéo, les distributeurs avec moyen de paiement de boissons et de nourriture sous emballage et les présentoirs réfrigérés. Les appareils peuvent avoir plusieurs fonctions. D'autres normes peuvent être applicables pour certaines fonctions telles que la réfrigération (CEI 60335-2-24) et le chauffage par micro-ondes (CEI 60335-2-25). La présente norme traite également des aspects relatifs à l'hygiène des appareils. Dans la mesure du possible, la présente norme traite des risques ordinaires présentés par les appareils, encourus par les utilisateurs et les agents d'entretien. Cependant, cette norme ne tient pas compte en général de l'emploi de l'appareil comme jouet par des jeunes enfants. Cette troisième édition annule et remplace la deuxième édition parue en 2002, y compris son Amendement 1 (2004) et son Amendement 2 (2008). Elle constitue une révision technique. Par rapport à la deuxième édition de la CEI 60335-2-75, les principales modifications indiquées ci-après ont été apportées dans la présente édition; certaines notes ont été supprimées ou converties en texte normative (5.2, 5.6, 5.104, 7.12.1, 7.12.101.1, 11.2, 11.8, 15.2.103, 15.2.104, 15.2.106, 15.2.109, 15.2.111, 19.102, 19.6, 19.13, 19.101, 22.6, 22.7, 22.112, 22.113, 22.114, 24.102, 27.2), ajout d'exigences pour les cafetières expresso en 3.115, 22.114 et dans toute la norme, modification de 11.4 en vue de traiter des appareils chauffants munis de dispositifs de commande de processus électroniques et de 11.6 en vue de traiter des appareils combinés exempts de dispositifs de commande de processus électroniques, modification de l'Article 22 en vue d'indiquer que les dispositifs de régulation de pression doivent à présent être dans l'impossibilité de fonctionner, suppression de l'ISO 13732-1 de la Bibliographie. L'attention des Comités Nationaux est attirée sur le fait que les fabricants d'appareils et les organismes d'essai peuvent avoir besoin d'une période transitoire après la publication d'une nouvelle publication CEI, ou d'une publication amendée ou révisée, pour fabriquer des produits conformes aux nouvelles exigences et pour adapter leurs équipements aux nouveaux essais ou aux essais révisés. Le comité recommande que le contenu de cette publication soit entériné au niveau national au plus tôt 12 mois et au plus tard 36 mois après la date de publication. Mots-clés : distribution d'aliments, distributeurs
Gospodinjski in podobni električni aparati - Varnost - 2-75. del: Posebne zahteve za komercialne dozirne in prodajne avtomate (IEC 60335-2-75:2012)
Standard IEC 60335-2-75:2012 obravnava varnost električnih komercialnih dozirnih in prodajnih avtomatov za pripravo ali izdajo hrane, pijače in potrošniških izdelkov, katerih nazivna napetost ne presega 250 V za enofazne aparate in 480 V za druge aparate. Primeri aparatov, ki spadajo na področje uporabe tega standarda, so avtomati za pripravo večjih količin čaja in kave, avtomati za cigarete, mlinčki za kavo, komercialni grelniki za tekočine, kavni avtomati z vgrajenim mlinčkom za kavo ali brez njega, kavni avtomati s hladilnim sistemom, avtomati za pripravo toplih in hladnih napitkov, avtomati za vročo vodo, avtomati za sladoled in stepeno smetano, ledomati, prodajni avtomati za zvočne ali video nosilce ali zgoščenke, prodajni avtomati za pakirano hrano in pijačo ter zamrzovalne skrinje za izdelke. Aparati imajo lahko več kot eno funkcijo. Za nekatere funkcije, kot sta hlajenje (IEC 60335-2-24) in segrevanje z mikrovalovi (IEC 60335-2-25), se lahko uporabljajo drugi standardi. Ta standard obravnava tudi higienske vidike aparatov. Ta standard v največji možni meri obravnava splošne nevarnosti, ki jih predstavljajo aparati ter s katerimi se srečujejo uporabniki in vzdrževalno osebje. Vendar na splošno ne vključuje primerov majhnih otrok, ki se igrajo z aparatom. Tretja izdaja razveljavlja in nadomešča drugo izdajo, objavljeno leta 2002, vključno z njenim dopolnilom 1 (2004) in njenim dopolnilom 2 (2008). Ta izdaja je tehnično popravljena izdaja. Glavne spremembe te izdaje v primerjavi z drugo izdajo standarda IEC 60335-2-75 so naslednje: nekatere opombe so izbrisane ali preoblikovane v normativno besedilo (5.2, 5.6, 5.104, 7.12.1, 7.12.101.1, 11.2, 11.8, 15.2.103, 15.2.104, 15.2.106, 15.2.109, 15.2.111, 19.102, 19.6, 19.13, 19.101, 22.6, 22.7, 22.112, 22.113, 22.114, 24.102, 27.2), dodane so zahteve za avtomate za pripravo kave espresso v točkah 3.115 in 22.114 ter v celotnem standardu, točka 11.4 je spremenjena tako, da obravnava grelne aparate z elektronskim upravljanjem in točka 11.6 tako, da obravnava kombinirane aparate brez elektronskega upravljanja, točka 22 je spremenjena tako, da določa, da so naprave za regulacijo tlaka onemogočene, ter standard ISO 13732-1 je izbrisan iz poglavja »Literatura«. Nacionalni odbori morajo upoštevati, da bodo proizvajalci opreme in organizacije za preskušanje morda potrebovali prehodno obdobje po objavi nove, spremenjene ali popravljene objave IEC, da bodo lahko izdelovali izdelke v skladu z novimi zahtevami in se opremili za izvajanje novih ali spremenjenih preskusov. Odbor priporoča, da se vsebina te publikacije sprejme v nacionalno uporabo ne prej kot 12 mesecev oziroma najpozneje 36 mesecev od datuma objave. Ključne besede: prodajni avtomati, dozirni avtomati.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2023
Gospodinjski in podobni električni aparati - Varnost - 2-75. del: Posebne zahteve
za komercialne dozirne in prodajne avtomate (IEC 60335-2-75:2012)
Household and similar electrical appliances - Safety - Part 2-75: Particular requirements
for commercial dispensing appliances and vending machines (IEC 60335-2-75:2012)
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-75:
Besondere Anforderungen für Ausgabegeräte und Warenautomaten für den
gewerblichen Gebrauch (IEC 60335-2-75:2012)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-75: Exigences
particulières pour les distributeurs commerciaux avec ou sans moyen de paiement (IEC
60335-2-75:2012)
Ta slovenski standard je istoveten z: EN IEC 60335-2-75:2023
ICS:
55.230 Razdelilni in prodajni Distribution and vending
avtomati machines
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN IEC 60335-2-75
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2023
ICS 55.230 Supersedes EN 60335-2-75:2004; EN 60335-2-
75:2004/A1:2005; EN 60335-2-75:2004/A11:2006; EN
60335-2-75:2004/A2:2008; EN 60335-2-
75:2004/A12:2010
English Version
Household and similar electrical appliances - Safety - Part 2-75:
Particular requirements for commercial dispensing appliances
and vending machines
(IEC 60335-2-75:2012)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-75: Exigences particulières pour les distributeurs ähnliche Zwecke - Teil 2-75: Besondere Anforderungen für
commerciaux avec ou sans moyen de paiement Ausgabegeräte und Warenautomaten für den gewerblichen
(IEC 60335-2-75:2012) Gebrauch
(IEC 60335-2-75:2012)
This European Standard was approved by CENELEC on 2020-11-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-75:2023 E
European foreword
This document (EN IEC 60335-2-75:2023) consists of the text of document IEC 60335-2-75:2012 edition
3.0 prepared by IEC/TC 61 "Safety of household and similar electrical appliances".
The following dates are fixed:
• latest date by which this document has to be (dop) 2023-11-05
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2026-05-05
conflicting with this document have to be withdrawn
This document supersedes EN 60335-2-75:2004+A1:2005+A11:2006+A2:2008+A12:2010 when
EN IEC 60335-2-75/A11:2023 is published.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60335-2-75:2023/A1:2023,
This document has been prepared under a Standardization Request given to CENELEC by the European
Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60335-2-75:2012 was approved by CENELEC as a European
Standard without any modification.
IEC 60335-2-75 ®
Edition 3.0 2012-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –
Part 2-75: Particular requirements for commercial dispensing appliances and
vending machines
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-75: Exigences particulières pour les distributeurs commerciaux avec ou
sans moyen de paiement
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 55.230 ISBN 978-2-83220-513-6
– 2 – 60335-2-75 © IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 8
3 Terms and definitions . 8
4 General requirement . 10
5 General conditions for the tests . 10
6 Classification . 11
7 Marking and instructions . 12
8 Protection against access to live parts . 14
9 Starting of motor-operated appliances . 14
10 Power input and current. 14
11 Heating. 14
12 Void . 15
13 Leakage current and electric strength at operating temperature . 15
14 Transient overvoltages . 16
15 Moisture resistance . 16
16 Leakage current and electric strength . 19
17 Overload protection of transformers and associated circuits . 19
18 Endurance . 19
19 Abnormal operation . 19
20 Stability and mechanical hazards. 21
21 Mechanical strength . 21
22 Construction . 21
23 Internal wiring . 24
24 Components . 25
25 Supply connection and external flexible cords . 26
26 Terminals for external conductors . 26
27 Provision for earthing . 26
28 Screws and connections . 26
29 Clearances, creepage distances and solid insulation . 27
30 Resistance to heat and fire . 27
31 Resistance to rusting . 27
32 Radiation, toxicity and similar hazards . 27
Annexes . 29
Annex AA (normative) Aging test for elastomeric parts . 29
Bibliography . 31
Figure 101 – Splash apparatus . 28
60335-2-75 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-75: Particular requirements for commercial
dispensing appliances and vending machines
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This part of International Standard IEC 60335 has been prepared by IEC technical committee 61:
Safety of hous
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.