HD 384.7.704 S1:2000

ISO/TR 22411:2008 presents ergonomics data and guidelines for applying ISO/IEC Guide 71 in addressing the needs of older persons and persons with disabilities in standards development. It provides ergonomics data and knowledge about human abilities - sensory, physical and cognitive - and allergies, as well as guidance on the accessible design of products, services and environments.

IEC 60364-8-1:2019(E) provides additional requirements, measures and recommendations for the design, erection and verification of all types of low-voltage electrical installation including local production and storage of energy for optimizing the overall efficient use of electricity. It introduces requirements and recommendations for the design of an electrical installation within the framework of an energy efficiency management approach in order to get the best permanent functionally equivalent...view more

The particular requirements specified in this part of the HD 60364 series apply only to circuits intended to supply floating crafts used for administrative, commercial, industrial, leisure or sport activities, hereinafter referred to as “ships”, in harbours, marinas and similar locations. The particular requirements do not apply to: - onshore installations dedicated to supply inland navigation vessels for commercial and administrative purpose; NOTE 1 Such requirements are defined in HD 60364-7-7...view more

NEW!IEC 60364-7-711:2018 is available as IEC 60364-7-711:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60364-7-711:2018 gives requirements applying to the temporary electrical installations in exhibitions, shows and stands (including mobile and portable displays and equipment) to protect users. This second edition cancels and replaces the first edition published in 2007. This edition c...view more

IEC 60364-7-721:2017(E) lays down particular requirements applying to electrical circuits and equipment intended for the use of the caravan for habitation purposes. This new edition includes the following significant technical changes with respect to the previous edition: - a minimum height of not less than 500 mm above the base of the cylinders is now required for cables passing through the gas cylinder compartment; - it is now required that each independent installation shall be provided with ...view more

NEW!IEC 60364-7-722:2018 is available as IEC 60364-7-722:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60364-7-722:2018 applies to: • circuits intended to supply energy to electric vehicles, and • circuits intended for feeding back electricity from electric vehicles. Circuits covered by this document are terminated at the connecting point. This edition includes the following significan...view more

This part of IEC 60364 covers general requirements for safety services, selection and erection of electrical supply systems for safety services and the electrical source for safety services. Standby electrical supply systems are outside the scope of this document. This documentdoes not apply to installations in hazardous areas (BE3), for which requirements are given in IEC 60079-14.

IEC 60364-8-2:2018 provides additional requirements, measures and recommendations for design, erection and verification of all types of low-voltage electrical installation according to IEC 60364-1:2005, Clause 11, including local production and/or storage of energy in order to ensure compatibility with the existing and future ways to deliver electrical energy to current-using equipment or to the public network by means of local sources. Such electrical installations are designated as prosumer’s ...view more

IEC 60364-7-7-704:2017(E) lays down requirements which apply to installations for construction and demolition sites for use during the period of the construction or demolition work which are intended to be taken out of service upon completion of the works. Examples include the following: - construction work of new buildings; - repair, alteration, extension or demolition of existing buildings or parts of existing buildings; - engineering works; - earthworks; - work of similar nature. The requirem...view more