Railway applications - Mounted parts of the traction transformer and cooling system - Part 1: HV bushing for traction transformers

This Technical Specification is applicable to high voltage (HV) bushings, intended for use in traction transformers of rail vehicles, cooled by insulating liquid with rated voltages up to 25 kV single phase and rated currents up to 630 A at frequencies from 16,7 Hz to 60 Hz. HV bushings within the scope of this Technical Specification are bushings for separable connectors that connect the power supply coming from a contact wire or from a contact rail to the primary winding of the traction transformer. The Technical Specification only deals with HV bushings that are mounted to the transformer. CLC/TS 50537-1 gives consideration to both technical and normative requirements of the railway environment and restricts the variety provided by industry-wide standards for bushings, such as EN 50180 and EN 60137. It determines requirements and tests enabling the interchangeability especially regarding electrical and mechanical interfaces. Furthermore, service conditions are described. The cable plug as the counterpart of the HV bushing’s plug-in end is not covered by this Technical Specification.

Bahnanwendungen - Anbauteile des Haupttransformators und Kühlsystems - Teil 1: Hochspannungsdurchführung für Haupttransformatoren

Applications ferroviaires - Accessoires des transformateurs de traction et systèmes de refroidissement - Partie 1: Traversées haute tension pour transformateurs de traction

Železniške naprave - Vgrajeni deli za transformatorje vlečnih tokokrogov in hladilni sistem - 1. del: VN skoznjiki za vlečne transformatorje

To tehnično poročilo velja za visokonapetostne (HV) skoznjike, namenjene vlečnim transformatorjem voznih sredstev, ki jih hladi izolacijska tekočina z nazivno napetostjo do 25 kV enofaznega toka in nazivnim tokom do 630 A pri frekvencah med 16,7 Hz in 60 Hz. Visokonapetostni skoznjiki v okviru te tehnične specifikacije so skoznjiki za ločljive končnike, ki povezujejo napajanje, ki prihaja s kontaktnega vodnika ali vodila, s primarnim navitjem transformatorja vlečnega transformatorja. Tehnična specifikacija obravnava le visokonapetostne skoznjike, ki so vgrajeni v transformator.  CLC/TS 50537-1 obravnava tehnične in normativne zahteve za železniško okolje in omejuje število različnih skoznjikov, ki jih omogočajo standardi v industriji, kot sta EN 50180 in EN 60137. Določa zahteve in preskuse, ki omogočajo medsebojno zamenljivost, predvsem v zvezi z električnimi in mehanskimi vmesniki. Opisani so tudi delovni pogoji. Ta tehnična specifikacija ne zajema kabelskega vtiča, ki je nasprotni del vtikača visokonapetostnega skoznjika.

General Information

Status
Published
Publication Date
11-Feb-2010
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
26-Sep-2017

Buy Standard

Technical specification
TS CLC/TS 50537-1:2010
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CLC/TS 50537-1:2010
01-april-2010
äHOH]QLãNHQDSUDYH9JUDMHQLGHOL]DWUDQVIRUPDWRUMHYOHþQLKWRNRNURJRYLQKODGLOQL
VLVWHPGHO91VNR]QMLNL]DYOHþQHWUDQVIRUPDWRUMH
Railway applications - Mounted parts of the traction transformer and cooling system -
Part 1: HV bushing for traction transformers
Bahnanwendungen - Anbauteile des Haupttransformators und Kühlsystems - Teil 1:
Hochspannungsdurchführung für Haupttransformatoren
Applications ferroviaires - Accessoires des transformateurs de traction et systèmes de
refroidissement - Partie 1: Traversées haute tension pour transformateurs de traction
Ta slovenski standard je istoveten z: CLC/TS 50537-1:2010
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST-TS CLC/TS 50537-1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CLC/TS 50537-1:2010

---------------------- Page: 2 ----------------------

SIST-TS CLC/TS 50537-1:2010

TECHNICAL SPECIFICATION
CLC/TS 50537-1

SPÉCIFICATION TECHNIQUE
February 2010
TECHNISCHE SPEZIFIKATION

ICS 29.180; 45.060.10


English version


Railway applications -
Mounted parts of the traction transformer and cooling system -
Part 1: HV bushing for traction transformers



Applications ferroviaires -  Bahnanwendungen -
Accessoires des transformateurs Anbauteile des Haupttransformators
de traction et systèmes und Kühlsystems -
de refroidissement - Teil 1: Hochspannungsdurchführung
Partie 1: Traversées haute tension für Haupttransformatoren
pour transformateurs de traction






This Technical Specification was approved by CENELEC on 2010-01-22.

CENELEC members are required to announce the existence of this TS in the same way as for an EN and to
make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting
national standards in force.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.



CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TS 50537-1:2010 E

---------------------- Page: 3 ----------------------

SIST-TS CLC/TS 50537-1:2010
CLC/TS 50537-1:2010 - 2 -
Foreword
This Technical Specification was prepared by Working Group 23 of SC 9XB, Electromechanical
material on board of rolling stock, of Technical Committee CENELEC TC 9X, Electrical and electronic
applications for railways.
It was circulated for voting in accordance with the Internal Regulations, Part 2, Subclause 11.3.3.3 and
was accepted as a CENELEC Technical Specification on 2010-01-22.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following date was fixed:
– latest date by which the existence of the CLC/TS
has to be announced at national level (doa) 2010-07-22
The CLC/TS 50537 series “Railway applications – Mounted parts of the traction transformer and
cooling system” consists of four different parts:
• Part 1: HV bushing for traction transformers;
• Part 2: Pump for insulating liquid for traction transformers and reactors;
• Part 3: Water pump for traction converters;
• Part 4: Gas and liquid actuated (Buchholz) relay for liquid immersed transformers and reactors
with conservator for rail vehicles.
1)
The CLC/TS 50537 series shall be read in conjunction with CLC/TS 50534 “Railway applications –
Generic system architectures for onboard electric auxiliary power systems”.
This standardization project was derived from the EU-funded Research project MODTRAIN
(MODPOWER). It is part of a series of standards, referring to each other. The hierarchy of the
standards is intended to be as follows:
———————
1)
Under development.

---------------------- Page: 4 ----------------------

SIST-TS CLC/TS 50537-1:2010
- 3 - CLC/TS 50537-1:2010
Overview on the technical framework
CLC/TS 50534 defines the basis for other depending standards
CLC/TS 50534
Railway applications - Generic system architectures for
onboard electric auxiliary powers systems
Level 1: Architectures
EN 50546
CLC/TS 50535
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.