On-load tap-changers

This standard applies to on-load tap-changers for power transformers, and their motor-drive mechanisms. It relates mainly to tap-changers immersed in transformer oil according to IEC 60296, but may also be used for gas-insulated tap-changers in so far as conditions are applicable.

Stufenschalter

Changeurs de prises en charge

La présente norme s'applique aux changeurs de prises en charge pour les transformateurs de puissance et à leurs mécanismes d'entraînement à moteur. Elle concerne principalement les changeurs de prises immergés dans de l'huile de transformateur conformément à la CEI 60296, mais peut également être utilisée pour les changeurs de prises à isolement dans un gaz, dans la mesure où les conditions le permettent.

On-load tap-changers (IEC 60214:1989, modified)

General Information

Status

Withdrawn

Publication Date

13-Aug-1997

Withdrawal Date

28-Feb-1998

ICS

29.120.40 - Switches

Technical Committee

CLC/TC 14 - Power transformers

Drafting Committee

IEC/TC 14 - IEC_TC_14

Parallel Committee

IEC/SC 14B - IEC_SC_14B

Current Stage

9960 - Withdrawal effective - Withdrawal

Start Date

01-Mar-2006

Completion Date

01-Mar-2006

Ref Project

SIST EN 60214:1998 - On-load tap-changers

Relations

Replaced By

EN 60214-1:2003 - Tap-changers - Part 1: Performance requirements and test methods

Effective Date

28-Jan-2023

Buy Standard

Standard

EN 60214:1998

English language

44 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Standards Content (Sample)

EN 60214:1998

SLOVENSKI STANDARD
SIST EN 60214:1998
01-april-1998
On-load tap-changers (IEC 60214:1989, modified)
On-load tap-changers
Stufenschalter
Changeurs de prises en charge
Ta slovenski standard je istoveten z: EN 60214:1997
ICS:
29.120.40 Stikala Switches
SIST EN 60214:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60214:1998

---------------------- Page: 2 ----------------------

SIST EN 60214:1998

---------------------- Page: 3 ----------------------

SIST EN 60214:1998

---------------------- Page: 4 ----------------------

SIST EN 60214:1998

---------------------- Page: 5 ----------------------

SIST EN 60214:1998

---------------------- Page: 6 ----------------------

SIST EN 60214:1998

---------------------- Page: 7 ----------------------

SIST EN 60214:1998

---------------------- Page: 8 ----------------------

SIST EN 60214:1998

---------------------- Page: 9 ----------------------

SIST EN 60214:1998

---------------------- Page: 10 ----------------------

SIST EN 60214:1998

---------------------- Page: 11 ----------------------

SIST EN 60214:1998

---------------------- Page: 12 ----------------------

SIST EN 60214:1998

---------------------- Page: 13 ----------------------

SIST EN 60214:1998

---------------------- Page: 14 ----------------------

SIST EN 60214:1998

---------------------- Page: 15 ----------------------

SIST EN 60214:1998

---------------------- Page: 16 ----------------------

SIST EN 60214:1998

---------------------- Page: 17 ----------------------

SIST EN 60214:1998

---------------------- Page: 18 ----------------------

SIST EN 60214:1998

---------------------- Page: 19 ----------------------

SIST EN 60214:1998

---------------------- Page: 20 ----------------------

SIST EN 60214:1998

---------------------- Page: 21 ---------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC

EN IEC 60669-2-1:2022/AC:2024-01(Corrigendum)

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices

SIST EN IEC 60669-2-1:2023/AC:2024

Corrigendum
1 page
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 60947-6-2:2023/AC:2023-07(Corrigendum)

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

SIST EN IEC 60947-6-2:2023/AC:2023

Corrigendum
3 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 60947-6-1:2023(Main)

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

SIST EN IEC 60947-6-1:2023

This part of EN 60947applies to transfer switching equipment (TSE) to be used in power systems with interruption of the supply to the load during transfer, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.

Standard
66 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 60947-6-2:2023(Main)

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

SIST EN IEC 60947-6-2:2023

Applies to control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated voltage not exceeding 1 000 V a.c. or 1 500 V d.c. CPSs are intended to provide both protective and control functions for circuits and are operated otherwise than by hand. They may also fulfil additional functions, such as isolation.

Standard
116 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 60669-2-1:2022/A11:2022(Amendment)

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices

SIST EN IEC 60669-2-1:2023/A11:2023

To give requirements and tests for electronic control devices, a general term to cover electronic switches, HBES/BACS switches and electronic extension units. It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either indoors or outdoors. It also applies to electronic extension units with a rated supply voltage not exceeding 250 V AC and 120 V DC. This Part of IEC 60669 also applies to electronic control devices which include integrated radio receivers and transmitters.

Amendment
10 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 60669-2-1:2022(Main)

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices

SIST EN IEC 60669-2-1:2023

This clause of Part 1 is completely replaced by the following: This part of IEC 60669 applies to electronic control devices, a general term to cover electronic switches, home and building electronic systems (HBES) / building automation and control systems (BACS) switches and electronic extension units. It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either indoors or outdoors. It also applies to electronic extension units with a rated supply voltage not exceeding 250 V AC and 120 V DC, such as sensors and push buttons. This document also applies to electronic remote control switches (RCS) and electronic time delay switches (TDS). Particular requirements are given in Annex FF. Switches including only passive components such as resistors, capacitors, inductors, positive temperature coefficient (PTC) and negative temperature coefficient (NTC) components, varistors, printed wiring boards and connectors are not considered as electronic control devices. This document also applies to electronic switches and HBES/BACS switches for the operation of lighting equipment circuits and the control of the brightness of lighting equipment (dimmers) as well as the control of the speed of motors (for example, those used in ventilating fans) and for other purposes (for example, heating controls). The operation and/or control as mentioned above can be transmitted by an electronic signal via several media, for example, powerline (mains), twisted pair, optical fibre, radio frequency, infrared, etc. and are performed: - intentionally by a person via an actuating member, a key, a card, etc., via a sensing surface or a sensing unit, by means of touch, proximity, turn, optical, acoustic, thermal; - by physical means, for example, light, temperature, humidity, time, wind velocity, presence of people; - by any other influence. This document also applies to electronic control devices which include integrated radio receivers and transmitters. This document covers only those requirements for mounting boxes which are necessary for the tests on the electronic control devices. Requirements for general purpose mounting boxes are given in the relevant part, if any, of IEC 60670. This document is not intended to cover devices falling within the scope of IEC 60730 (all parts). Electronic control devices complying with this document are suitable for use at ambient temperature not normally exceeding 25 °C but occasionally reaching 35 °C with a lower limit of the ambient air temperature of −5 °C. NOTE 1 For lower temperatures, see Annex E. Functional safety aspects are not covered by this document. Functional safety requirements are covered by the standards of the controlled devices. In locations where special conditions prevail, such as in ships, vehicles and the like and in hazardous locations, for example where explosions are liable to occur, special construction and/or additional requirements may be required. This document is not intended to cover devices which are designed to be incorporated in appliances or are intended to be delivered together with a specific appliance and which are within the scope of IEC 60730 (all parts) or IEC 61058-1. Examples of designs of electronic switches and HBES/BACS switches and functions are shown in Annex AA. Additional requirements for electronic control devices using DLT-technology in accordance with IEC 62756-1 are given in Annex CC. Electrical interface specification for phase-cut dimmer used in phase-cut dimmed lighting systems are given for information only in Annex EE. NOTE 2 Electronic switches and HBES/BACS switches without a mechanical switch in the main circuit do not provide a "full off-state". Therefore, the circuit on the load side are to be considered to be live.

Standard
139 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 60947-5-2:2020/A11:2022(Amendment)

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches

SIST EN IEC 60947-5-2:2020/A11:2022

EN-IEC 60947-5-2 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects, ultrasonic proximity switches that sense the presence of sound reflecting objects, photoelectric proximity switches that sense the presence of objects and non-mechanical magnetic proximity switches that sense the presence of objects with a magnetic field. Products covered by the scope of this document are not subjected to defined behaviours under fault conditions. Proximity switches with defined behaviour are covered by IEC 60947-5-3 and have to fulfil additional requirements. These proximity switches are self-contained, have semiconductor switching element(s) and are intended to be connected to circuits, the rated voltage of which does not exceed 250 V 50 Hz/60 Hz AC RMS or 300 V DC. Examples of typical applications for in-scope products: - factory automation and machinery industry; - logistic and packaging industry; - conveyor belts, lifts; - process industry; - power plants. Special applications (e.g. corrosive atmosphere) can cause additional requirements. This document is not intended to cover proximity switches with analogue outputs. The object of this document is to state for proximity switches: - definitions; - classification; - characteristics; - product information; - normal service, mounting and transport conditions; - constructional and performance requirements; - tests to verify rated characteristics. Products covered by the scope of this document are expected to be selected, installed, and maintained by skilled personnel only.

Amendment
15 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 60947-3:2021/AC:2021-11(Corrigendum)

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

SIST EN IEC 60947-3:2021/AC:2022

IEC corrected version

Corrigendum
3 pages
English and French language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 60947-3:2021(Main)

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

SIST EN IEC 60947-3:2021

IEC 60947-3:2020 applies to switches, disconnectors, switch-disconnectors and fuse-combination units and their dedicated accessories to be used in distribution circuits and motor circuits of which the rated voltage does not exceed 1 000 V AC or 1 500 V DC. This fourth edition cancels and replaces the third edition published in 2008, Amendment 1:2012 and Amendment 2:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
addition of critical load current tests for DC switches (see 9.3.9);
addition of requirements for a conditional short-circuit rating for disconnectors, switches, and switch-disconnectors protected by circuit-breakers (see 9.3.7.2);
addition of new categories for high-efficiency motors switching (see Annex A);
addition of new Annex E for connection to aluminium conductors;
addition of new Annex F for power losses measurement.

Standard
99 pages
English language
sale 10% off
e-Library read for
1 day
Standard
99 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 61058-2-5:2021(Main)

Switches for appliances - Part 2-5: Particular requirements for change-over selectors

SIST EN IEC 61058-2-5:2021

IEC 61058-2-5:2018 is available as IEC 61058-2-5:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61058-2-5:2018 applies to change-over selectors (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A. This third edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - updated references due to new structure of IEC 61058-1; - changes on conducting the heating test due to the corresponding changes in IEC 61058-1.

Standard
13 pages
English language
sale 10% off
e-Library read for
1 day