Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria

Hochspannungs-Polymerisolatoren für Innenraum- und Freiluftanwendung - Allgemeine Begriffe, Prüfverfahren und Annahmekriterien

Isolateurs polymériques à haute tension pour usage intérieur et extérieur - Définitions générales, méthodes d'essai et critères d'acceptation

Polimerni visokonapetostni izolatorji za notranjo in zunanjo uporabo - Splošne definicije, preskusne metode in prevzemna merila

General Information

Status
Not Published
Publication Date
06-Jul-2025
Current Stage
4060 - Enquiry results established and sent to TC, SR, BTTF - Enquiry
Start Date
01-Mar-2024
Completion Date
01-Mar-2024

Relations

Buy Standard

Draft
prEN IEC 62217:2024 - BARVE
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2024
Polimerni visokonapetostni izolatorji za notranjo in zunanjo uporabo - Splošne
definicije, preskusne metode in prevzemna merila
Polymeric HV insulators for indoor and outdoor use - General definitions, test methods
and acceptance criteria
Hochspannungs-Polymerisolatoren für Innenraum- und Freiluftanwendung - Allgemeine
Begriffe, Prüfverfahren und Annahmekriterien
Isolateurs polymériques à haute tension pour utilisation à l'intérieur ou à l'extérieur -
Définitions générales, méthodes d'essai et critères d'acceptation
Ta slovenski standard je istoveten z: prEN IEC 62217:2023
ICS:
29.080.10 Izolatorji Insulators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

36/589/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62217 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-12-08 2024-03-01
SUPERSEDES DOCUMENTS:
36/582/RR
IEC TC 36 : INSULATORS
SECRETARIAT: SECRETARY:
Sweden Mr Dan Windmar
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and
acceptance criteria
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.

IEC CDV 62217 © IEC 2023 2 36/589/CDV

1 CONTENTS
3 FOREWORD. 4
4 INTRODUCTION . 6
5 1 Scope . 7
6 2 Normative references . 7
7 3 Terms and definitions . 8
8 4 Identification . 11
9 5 Environmental conditions . 11
10 6 Information on transport, storage and installation . 12
11 7 Classification of tests . 13
12 7.1 Design tests . 13
13 7.2 Type tests . 13
14 7.3 Sample tests . 13
15 7.4 Routine tests . 13
16 8 General requirements for insulator test specimens . 13
17 9 Design tests . 14
18 9.1 General . 14
19 9.2 Tests on interfaces and connections of end fittings . 14
20 9.2.1 General . 14
21 9.2.2 Test specimens . 14
22 9.2.3 Reference voltage and temperature for verification tests . 15
23 9.2.4 Reference disruptive-discharge dry power frequency test . 15
24 9.2.5 Product specific pre-stressing . 15
25 9.2.6 Water immersion pre-stressing . 15
26 9.2.7 Verification tests . 15
27 9.3 Tests on housing material . 17
28 9.3.1 Hardness test . 17
29 9.3.2 Accelerated weathering test . 18
30 9.3.3 Tracking and erosion test – 1 000 h salt fog a.c. voltage test . 18
31 9.3.4 Flammability test . 20
32 9.3.5 Hydrophobicity transfer test . 20
33 9.4 Tests on core material . 21
34 9.4.1 Porosity test (Dye penetration test) . 22
35 9.4.2 Water diffusion test . 23
36 9.4.3 Stress corrosion test . 24
37 9.5 Water diffusion test on core with housing . 24
38 9.5.1 General . 24
39 9.5.2 Test specimens . 24
40 9.5.3 Test procedure . 24
41 9.5.4 Acceptance criteria . 24
42 Annex A (informative) Explanation of the concept of classes for the design tests . 25
43 Annex B (informative) Recommended Test Application . 26
44 Annex C (informative) Test for AC/DC application . 27
45 Annex D (informative) Difference between the tracking and erosion and accelerated
46 ageing test on polymeric insulators . 28
47 Annex E (informative) Consideration of Electric field control . 29
48 Bibliography . 31

IEC CDV 62217 © IEC 2023 3 36/589/CDV

50 Figure 1 –Illustration of the electrodes position and axial length . 16
51 Figure 2- Example of boiling container for the water diffusion test . 17
52 Figure 3 – Examples of test specimen for core material . 22
53 Figure 4 – Example of porosity test sample with certain areas not being allowed to be
54 sealed . 23
55 Figure E.1 Interface description for insulator with housing made by modular assembly
56 and external sealant . 30
57 Figure E.2 Interface description for insulator with housing made by injection molding
58 and overmolded end fitting . 30
60 Table 1 – Normal environmental conditions . 12
61 Table 2 – Initial NaCI content of the water as a function of the specimen dimensions . 19
62 Table 3 – Flammability requirements . 20
63 Table B.1 – Application on interfaces and connections of end fittings . 26
64 Table B.2 – Application on housing materials . 26
65 Table B.3 – Application on core materials . 26
66 Table B.4 – Application on core with housing . 26
67 Table C.1 – Test for AC/DC application . 27
IEC CDV 62217 © IEC 2023 4 36/589/CDV

69 INTERNATIONAL ELECTROTECHNICAL COMMISSION
70 ____________
72 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE -
73 GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
76 FOREWORD
77 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
78 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
79 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
80 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
81 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
82 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
83 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
84 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
85 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
86 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
87 consensus of opinion on the relevant subjects since each technical committee has repres entation from all
88 interested IEC National Committees.
89 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
90 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
91 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
92 misinterpretation by any end user.
93 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
94 transparently to the maximum extent possible in their national and regional publications. Any divergence between
95 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
96 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
97 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
98 services carried out by independent certification bodies.
99 6) All users should ensure that they have the latest edition of this publication.
100 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
101 members of its technical committees and IEC National Committees for any personal injury, property damage or
102 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
103 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
104 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
105 indispensable for the correct application of this publication.
106 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
107 rights. IEC shall not be held responsible for identifying any or all such patent rights.
108 International Standard IEC 62217 has been prepared by IEC technical committee 36: Insulators.
109 This third edition of the standard cancels and replaces the second edition, published in 2012.
110 It constitutes its technical revision and introduces the fol
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.