iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60068-2-44:1995

(Main)

Environmental testing - Part 2: Tests - Guidance on Test T: Soldering

Environmental testing - Part 2: Tests - Guidance on Test T: Soldering

Provides background information and recommendations for writers of specifications containing references to IEC 60068-2-20, IEC 60068-2-54 and 60068-2-58

Umweltprüfungen - Teil 2: Prüfungen - Leitfaden für die Prüfung T: Löten

Essais d'environnement - Partie 2: Essais - Guide pour l'essai T: Soudure

Fournit des informations et des recommandations aux rédacteurs de spécifications contenat des références aux CEI 60068-2-20, CEI 60068-2-54 et 60068-2-58

Environmental testing - Part 2: Tests - Guidance on Test T: Soldering

General Information

Status
Withdrawn
Publication Date
16-Mar-1995
Withdrawal Date
29-Feb-1996
ICS
19.040 - Environmental testing
Technical Committee
CLC/SR 91 - Electronics assembly technology
Drafting Committee
IEC/TC 91 - IEC_TC_91
Parallel Committee
IEC/TC 91 - IEC_TC_91
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
17-Jun-2019
Completion Date
17-Jun-2019
Ref Project
SIST EN 60068-2-44:2001 - Environmental testing -- Part 2: Tests - Guidance on Test T: Soldering

Relations

Replaced By
EN 60068-3-13:2016 - Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering
Effective Date
25-Jan-2023

Buy Standard

EN 60068-2-44:2001EN 60068-2-44:2001
PreviousNext
Standard
EN 60068-2-44:2001
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60068-2-44:2001
01-september-2001
Environmental testing - Part 2: Tests - Guidance on Test T: Soldering
Environmental testing -- Part 2: Tests - Guidance on Test T: Soldering
Umweltprüfungen -- Teil 2: Prüfungen - Leitfaden für die Prüfung T: Löten
Essais d'environnement -- Partie 2: Essais - Guide pour l'essai T: Soudure
Ta slovenski standard je istoveten z: EN 60068-2-44:1995
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
SIST EN 60068-2-44:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60068-2-44:2001

---------------------- Page: 2 ----------------------

SIST EN 60068-2-44:2001

---------------------- Page: 3 ----------------------

SIST EN 60068-2-44:2001

---------------------- Page: 4 ----------------------

SIST EN 60068-2-44:2001

---------------------- Page: 5 ----------------------

SIST EN 60068-2-44:2001

---------------------- Page: 6 ----------------------

SIST EN 60068-2-44:2001

---------------------- Page: 7 ----------------------

SIST EN 60068-2-44:2001

---------------------- Page: 8 ----------------------

SIST EN 60068-2-44:2001

---------------------- Page: 9 ----------------------

SIST EN 60068-2-44:2001

---------------------- Page: 10 ----------------------

SIST EN 60068-2-44:2001

---------------------- Page: 11 ----------------------

SIST EN 60068-2-44:2001

---------------------- Page: 12 ----------------------

SIST EN 6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60068-2-21:2021(Main)
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
SIST EN IEC 60068-2-21:2021

IEC 60068-2-21:2021 is applicable to all electrical and electronic components whose terminations or integral mounting devices are liable to be submitted to stresses during normal assembly or handling operations and is also applicable to surface mount devices (SMDs). This seventh edition cancels and replaces the sixth edition, published in 2006, and IEC 60068‑2‑77:1999. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
integration of parts of IEC 60068-2-77 (see Annex X); IEC 60068-2-77 is withdrawn with the publication of this document;
Annex X is added to show the correlation of the clauses and subclauses in this edition of IEC 60068-2-21 with the clauses in IEC 60068-2-21:2006 and IEC 60068-2-77:1999.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-2-20:2021(Main)
Environmental testing - Part 2-20: Tests - Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads
SIST EN IEC 60068-2-20:2021

IEC 60068-2-20:2021 is available as IEC 60068-2-20:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-2-20:2021 outlines Tests Ta and Tb, applicable to devices with leads and leads themselves. Soldering tests for surface mounting devices (SMD) are described in IEC 60068‑2‑58. This document provides procedures for determining the solderability and resistance to soldering heat of devices in applications using solder alloys, which are eutectic or near eutectic tin lead (Pb), or lead-free alloys. The procedures in this document include the solder bath method and soldering iron method. The objective of this document is to ensure that component lead or termination solderability meets the applicable solder joint requirements of IEC 61191-3 and IEC 61191-4. In addition, test methods are provided to ensure that the component body can be resistant to the heat load to which it is exposed during soldering. This edition includes the following significant technical changes with respect to the previous edition: - update of and clarification of pre-conditioning (former "aging") and its relation to natural aging.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60068-2-69:2017/A1:2019(Amendment)
Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
SIST EN 60068-2-69:2017/A1:2021
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-2-82:2019(Main)
Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies
SIST EN IEC 60068-2-82:2019

IEC 60068-2-82:2019 specifies tests for the whiskering propensity of surface finishes of electric or electronic components and mechanical parts such as punched/stamped parts (for example, jumpers, electrostatic discharge protection shields, mechanical fixations, press‑fit pins and other mechanical parts used in electronic assemblies) representing the finished stage, with tin or tin-alloy finish. Changes of the physical dimensions of mould compounds, plastics and the like during the required test flow are not considered or assessed. The test methods have been developed by using a knowledge-based approach. This edition includes the following significant technical changes with respect to the previous edition: – extension of the scope of the test standard from electronic to electromechanic components and press-fit pins, which are used for assembly and interconnect technology; – significant reduction of the testing effort by a knowledge-based selection of test conditions i.e. tests not relevant for a given materials system can be omitted (see Annex D); – harmonization with JESD 201A by omission of severities M, N for temperature cycling tests; – highly reduced test duration (1 000 h instead of 4 000 h) for damp-heat test by introducing test condition at elevated humidity of 85 % R.H. and a temperature of 85 °C providing increased severity.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60068-2-58:2015/A1:2018(Amendment)
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
SIST EN 60068-2-58:2015/A1:2018
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60068-2-69:2017/AC:2018-03(Corrigendum)
Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
SIST EN 60068-2-69:2017/AC:2018

IEC corrigendum

  • Corrigendum
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60068-2-69:2017(Main)
Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
SIST EN 60068-2-69:2017

IEC 60068-2-69:2017 outlines test Te/Tc, the solder bath wetting balance method and the solder globule wetting balance method to determine, quantitatively, the solderability of the terminations. Data obtained by these methods are not intended to be used as absolute quantitative data for pass–fail purposes. The procedures describe the solder bath wetting balance method and the solder globule wetting balance method. They are applicable to components and printed boards with metallic terminations and metallized solder pads. This document provides the measurement procedures for solder alloys both with and without lead (Pb). This edition includes the following significant technical changes with respect to the previous edition: - integration of IEC 60068-2-54; - inclusion of tests of printed boards; - inclusion of new component types, and updating test parameters for the whole component list; - inclusion of a new gauge R & R test protocol to ensure that the respective wetting balance equipment is correctly calibrated.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60068-3-13:2016(Main)
Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering
SIST EN 60068-3-13:2016

IEC 60068-3-13:2016 provides background information and guidance for writers and users of specifications for electric and electronic components, containing references to the test standards IEC 60068-2-20, IEC 60068-2-58, IEC 60068-2-69, IEC 60068-2-83, and to IEC 61760-1, which defines requirements to the specification of surface mounting components. This first edition cancels and replaces IEC 60068-2-44:1995 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - information for lead-free solders are added; - technical update and restructuring.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60068-2-58:2015(Main)
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
SIST EN 60068-2-58:2015

IEC 60068-2-58:2015 outlines test Td, applicable to surface mounting devices (SMD). This standard provides procedures for determining the solderability and resistance to soldering heat of devices in applications using solder alloys, which are eutectic or near eutectic tin lead (Pb), or lead-free alloys. The procedures use either a solder bath or reflow method and are applicable only to specimens or products designed to withstand short term immersion in molten solder or limited exposure to reflow systems. The solder bath method is applicable to SMDs designed for flow soldering and SMDs designed for reflow soldering when the solder bath (dipping) method is appropriate. The reflow method is applicable to the SMD designed for reflow soldering, to determine the suitability of SMDs for reflow soldering and when the solder bath (dipping) method is not appropriate. This edition includes the following significant technical changes with respect to the previous edition: - the addition of Sn-Bi low temperature solder alloy; - the addition of several reflow test conditions in Table 7 - Resistance to soldering heat - Test conditions and severity, reflow method; - introduction of reflow test method for Test Td3: Dewetting and resistance to dissolution of metallization; - implementation of guidance for the choice of a test severity in Clause B.3.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60068-2-83:2011(Main)
Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste
SIST EN 60068-2-83:2012

IEC 60068-2-83:2011 provides methods for comparative investigation of the wettability of the metallic terminations or metallized terminations of SMDs with solder pastes. Data obtained by these methods are not intended to be used as absolute quantitative data for pass - fail purposes. NOTE: Different solderability test methods for SMD are described in IEC 60068-2-58 and IEC 60068-2-69. IEC 60068-2-58 prescribes visual evaluation using solder bath and reflow method, IEC 60068-2-69 prescribes wetting balance evaluation using solder bath and solder globule method.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day