Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

CISPR 16-1-6:2014 provides procedures and supporting information for the calibration of antennas for determining antenna factors (AF) that are applicable to antennas intended for use in radiated disturbance measurements. It has the status of a basic EMC Standard in accordance with IEC Guide 107, Electromagnetic compatibility. The AF of an antenna is influenced by nearby surroundings and by its position in space relative to the radiating source. This standard focuses on antenna calibrations that provide the AF in a free-space environment in the direction of the boresight of the antenna. The frequency range addressed is 9 kHz to 18 GHz. The relevant antenna types covered in this standard are monopole, loop, dipole, biconical, log-periodic dipole-array (LPDA), hybrid and horn antennas. Guidance is also provided on measurement uncertainties associated with each calibration method and configuration, and the test instrumentation used.

Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-6: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Kalibrierung von Antennen für EMV-Messungen

Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-6: Appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Étalonnage des antennes CEM

Specifikacija za merilne naprave in metode za merjenje radijskih motenj in odpornosti - 1-6. del: Merilne naprave za merjenje radijskih motenj in odpornosti - Umerjanje EMC antene

Ta del standarda CISPR 16 določa postopke in podporne informacije za umerjanje anten za določanje antenskih dejavnikov (AF), ki veljajo za antene, namenjene uporabi pri merjenju sevanih motenj.
Ima status osnovnega standarda o elektromagnetni združljivosti (EMC) v skladu z vodilom IEC Guide 107 Electromagnetic compatibility – Guide to the drafting of electromagnetic compatibility publications (Elektromagnetna združljivost – Vodilo za pripravo osnutkov publikacij o elektromagnetni združljivosti). Na merjenje antenskih dejavnikov antene vpliva bližnje okolje in njen položaj v prostoru glede na vir sevanja. Ta standard se osredotoča na umerjanja antene, ki zagotavljajo antenske dejavnike na prostem v smeri glavne smeri snopa antene. Zajeti frekvenčni razpon je od 9 kHz do 18 GHz. Ustrezne vrste anten, zajete v tem standardu, so monopol, okvirna antena, dipol, dvostožčna antena, logaritemska periodična dipolska antena (LPDA), hibridna in lijakasta antena.
Določene so tudi smernice za merilne negotovosti, povezane z vsako metodo umerjanja in konfiguracijo, ter uporabljene preskusne instrumente.

General Information

Status
Published
Publication Date
05-Feb-2015
Withdrawal Date
20-Jan-2018
Current Stage
6060 - Document made available - Publishing
Start Date
06-Feb-2015
Completion Date
06-Feb-2015

Relations

Buy Standard

Standard
EN 55016-1-6:2015 - BARVE
English language
169 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2015
Specifikacija za merilne naprave in metode za merjenje radijskih motenj in
odpornosti - 1-6. del: Merilne naprave za merjenje radijskih motenj in odpornosti -
Umerjanje EMC antene
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 1-6: Radio disturbance and immunity measuring apparatus - EMC-antenna
calibration
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-6:
Appareils de mesure des perturbations radioélectriques et de l'immunité aux
perturbations radioélectriques - Étalonnage des antennes CEM
Ta slovenski standard je istoveten z: EN 55016-1-6:2015
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 55016-1-6

NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2015
ICS 33.100.10; 33.100.20
English Version
Specification for radio disturbance and immunity measuring
apparatus and methods -
Part 1-6: Radio disturbance and immunity measuring apparatus -
EMC antenna calibration
(CISPR 16-1-6:2014)
Spécifications des méthodes et des appareils de mesure Anforderungen an Geräte und Einrichtungen sowie
des perturbations radioélectriques et de l'immunité aux Festlegung der Verfahren zur Messung der hochfrequenten
perturbations radioélectriques - Störaussendung (Funkstörungen) und Störfestigkeit -
Partie 1-6: Appareils de mesure des perturbations Teil 1-6: Geräte und Einrichtungen zur Messung der
radioélectriques et de l'immunité aux perturbations hochfrequenten Störaussendung (Funkstörungen) und
radioélectriques - Étalonnage des antennes CEM Störfestigkeit - Kalibrierung von Antennen für EMV-
(CISPR 16-1-6:2014) Messungen
(CISPR 16-1-6:2014)
This European Standard was approved by CENELEC on 2015-01-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 55016-1-6:2015 E
Foreword
The text of document CISPR/A/1087/FDIS, future edition 1 of CISPR 16-1-6, prepared by
CISPR SC A “Radiointerference measurements and statistical methods" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 55016-1-6:2015.

The following dates are fixed:
(dop) 2015-10-21
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-01-21
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard CISPR 16-1-6:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

CISPR 16-1-1:2010 NOTE Harmonized as EN 55016-1-1:2010 (not modified).
CISPR 16-2-3:2010 NOTE Harmonized as EN 55016-2-3:2010 (not modified).
CISPR 16-4-2:2011 NOTE Harmonized as EN 55016-4-2:2011 (not modified).
CISPR 25:2008 NOTE Harmonized as EN 55025:2008 (not modified).
IEC 61000-4-22:2010 NOTE Harmonized as EN 61000-4-22:2010 (not modified).
IEC 61169-16:2006 NOTE Harmonized as EN 61169-16:2007 (not modified).
ISO/IEC 17043:2010 NOTE Harmonized as EN ISO/IEC 17043:2010 (not modified).

- 3 - EN 55016-1-6:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

CISPR 16-1-4 2010 Specification for radio disturbance EN 55016-1-4 2010
and immunity measuring apparatus
+A1 2012 +A1 2012
and methods -
Part 1-4: Radio disturbance and immunity
measuring apparatus - Antennas
and test sites for radiated disturbance
measurements
Specification for radio
CISPR 16-1-5 2014 EN 55016-1-5 2015
disturbance and immunity measuring
apparatus and methods -
Part 1-5: Radio disturbance and immunity
measuring apparatus - Antenna calibration
sites and reference test sites
for 5 MHz to 18 GHz
IEC 60050-161 -  International Electrotechnical - -
Vocabulary (IEV) -
Chapter 161: Electromagnetic compatibility
ISO/IEC Guide 98-3 2008 Uncertainty of measurement - - -
Part 3: Guide to the expression of
uncertainty in measurement (GUM:1995)

CISPR 16-1-6 ®
Edition 1.0 2014-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE

COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES

BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM

Specification for radio disturbance and immunity measuring apparatus and

methods –
Part 1-6: Radio disturbance and immunity measuring apparatus – EMC antenna

calibration
Spécifications des méthodes et des appareils de mesure des perturbations

radioélectriques et de l'immunité aux perturbations radioélectriques –

Partie 1-6: Appareils de mesure des perturbations radioélectriques et de

l'immunité aux perturbations radioélectriques – Étalonnage des antennes CEM

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XH
ICS 33.100.10; 33.100.20 ISBN 978-2-8322-1931-7

– 2 – CISPR 16-1-6:2014 © IEC 2014
CONTENTS
FOREWORD . 10
1 Scope . 12
2 Normative references . 12
3 Terms, definitions and abbreviations . 13
3.1 Terms and definitions . 13
3.1.1 Antenna terms . 13
3.1.2 Antenna factor terms . 16
3.1.3 Measurement site terms . 17
3.1.4 Other terms . 18
3.2 Abbreviations . 19
4 Fundamental concepts . 20
4.1 General . 20
4.2 The concept of antenna factor . 20
4.3 Calibration methods for 30 MHz and above . 21
4.3.1 General . 21
4.3.2 Antenna minimum separation distances . 21
4.3.3 General considerations for the TAM . 21
4.3.4 General considerations for the SSM. 21
4.3.5 General considerations for the SAM. 22
4.4 Measurement uncertainties for antenna calibration measurement results . 22
4.5 Summary of methods of measurement to obtain AF . 23
5 Calibration methods for the frequency range 9 kHz to 30 MHz . 25
5.1 Calibration of monopole antennas . 25
5.1.1 General . 25
5.1.2 Calibration by the ECSM . 26
5.2 Calibration of loop antennas . 32
5.2.1 General . 32
5.2.2 TEM (Crawford) cell method . 32
6 Frequencies, equipment and functional checks for calibrations at or above 30 MHz . 35
6.1 Calibration frequencies . 35
6.1.1 Calibration frequency ranges and increments . 35
6.1.2 Transition frequency for hybrid antennas . 36
6.2 Measurement instrumentation requirements for antenna calibrations . 37
6.2.1 Equipment types . 37
6.2.2 Mismatch . 38
6.2.3 Dynamic range and reproducibility of SIL measurement . 40
6.2.4 Signal-to-noise ratio . 40
6.2.5 Antenna masts and cables . 41
6.3 Functional checks of an AUC . 41
6.3.1 General . 41
6.3.2 Balance of an antenna . 41
6.3.3 Cross-polar performance of an antenna . 41
6.3.4 Radiation patterns of an antenna . 42
7 Basic parameters and equations common to antenna calibration methods for
frequencies above 30 MHz . 43
7.1 Summary of methods for measurements to obtain AF . 43

CISPR 16-1-6:2014 © IEC 2014 – 3 –
7.2 Site insertion loss measurements . 43
7.2.1 General . 43
7.2.2 SIL and SA measurement procedure. 43
7.2.3 Common uncertainty components of a SIL measurement . 44
7.3 Basic equations for the calculation of AF from SIL and SA measurements . 46
7.3.1 Antenna factor from SIL measurements . 46
7.3.2 Relationship of AF and SIL for a free-space calibration site . 46
7.3.3 Relationship of AF and SIL for a calibration site with a metal ground
plane .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.