EN 60309-1:1999/A11:2004

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements

D124/111: To be dealt with by BTWG 112-1 * Superseded by EN 60309-1:1999/A1:2007

Stecker, Steckdosen und Kupplungen für industrielle Anwendungen - Teil 1: Allgemeine Anforderungen

Prises de courant pour usages industriels - Partie 1: Règles générales

Vtiči, vtičnice in spojni elementi za industrijsko rabo - 1. del: Splošne zahteve

Standard se uporablja za vtiče in vtičnice, spojke kablov in aparatov z nazivno obratovalno napetostjo, ki ne presega 690 V enosmerne ali izmenične napetosti in frekvence 500 Hz, ter nazivnim tokom, ki ne presega 250 A, namenjene predvsem za industrijsko uporabo v notranjih prostorih ali na prostem. Seznam prednostnih nazivnih vrednosti ni namenjen izključitvi drugih nazivnih vrednosti, pri čemer so zahteve zanje v obravnavi. Ta evropski standard se uporablja samo za izdelke skupine I. Izdelki skupine II niso dovoljeni in niso primerni za uporabo v Evropi: sklicevanje in zahteve za izdelke skupine II so v tem standardu navedeni zgolj informativno in jih je treba prezreti. Ta evropski standard se uporablja samo za izdelke, ki so namenjeni uporabi s kabli z metričnimi velikostmi (mm2). Sklicevanje in zahteve za kable AWG in MCM so navedeni v ustrezni publikaciji IEC, pri čemer so v tem standardu navedeni zgolj informativno. Dodatek ZB zajema seznam sklicevanj na skupino II in/ali kable AWG/MCM, ki so izključeni iz tega standarda.

General Information

• Status: Withdrawn
• Publication Date: 17-May-2004
• Withdrawal Date: 31-Oct-2004
• ICS: 29.120.30 - Plugs, socket-outlets, couplers
• Technical Committee: CLC/TC 23H - Plugs, Socket-outlets and Couplers for industrial and similar applications, and for Electric Vehicles
• Drafting Committee: IEC/SC 23H - IEC_SC_23H
• Parallel Committee: IEC/SC 23H - IEC_SC_23H
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Nov-2009
• Completion Date: 01-Nov-2009
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Directive: 96/48/EC - Interoperability of the trans-European high-speed rail system
• Ref Project: SIST EN 60309-1:2000/A11:2006 - Plugs, socket-outlets and couplers for industrial purposes -- Part 1: General requirements

Relations

• Replaced By: EN 60309-1:1999/A1:2007 - Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 60309-1:2022 - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements
• Effective Date: 21-Jun-2022
• Amends: EN 60309-1:1999 - Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
• Effective Date: 28-Jan-2023

Standards Content (Sample)

EUROPEAN STANDARD EN 60309-1/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2004
ICS 29.120.30
English version
Plugs, socket-outlets and couplers for industrial purposes
Part 1: General requirements
Prises de courant pour usages industriels Stecker, Steckdosen und Kupplungen
Partie 1: Règles générales für industrielle Anwendungen
Teil 1: Allgemeine Anforderungen

This amendment A11 modifies the European Standard EN 60309-1:1999; it was approved by CENELEC
on 2004-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC me
...