EN IEC 62271-112:2021
(Main)High-voltage switchgear and controlgear - Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines
High-voltage switchgear and controlgear - Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines
This part of IEC 62271 applies to AC high-speed earthing switches (hereafter termed HSES) designed for indoor and outdoor installation and for operation at service frequencies of 50 Hz and 60 Hz on systems having voltages of 550 kV and above. HSESs described in this document are intended to extinguish the secondary arc remaining after clearing faults on transmission lines by the circuit-breakers. For more detailed information on HSESs, refer to Annex A.
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 112: Schnellschaltende Wechselstrom-Erdungsschalter zum Löschen von sekundären Lichtbögen auf Freileitungen
Appareillage à haute tension - Partie 112: Sectionneurs de terre rapides à courant alternatif pour l'extinction de l'arc secondaire sur les lignes de transport
IEC 62271-112:2021 est disponible sous forme de IEC 62271-112:2021 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 62271-112:2021 s’applique aux sectionneurs de terre rapides à courant alternatif (nommés ci-après HSES) conçus pour les installations intérieures et extérieures et pour fonctionner à des fréquences de 50 Hz et 60 Hz sur des réseaux de tensions assignées supérieures ou égales à 550 kV. Les HSES décrits dans le présent document sont destinés à supprimer l’arc secondaire demeurant après l’élimination des défauts sur les lignes de transport par les disjoncteurs. Pour de plus amples informations sur les HSES, voir l’Annexe A. Cette deuxième édition annule et remplace la première édition parue en 2013. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: Le document a été mis à jour par rapport à la deuxième édition de l’IEC 62271-1:2017.
Visokonapetostne stikalne in krmilne naprave - 112. del: Hitra ozemljitvena stikala na izmenični tok za ugašanje sekundarnega obloka na prenosnih vodih (IEC 62271-112:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2021
Nadomešča:
SIST EN 62271-112:2014
Visokonapetostne stikalne in krmilne naprave - 112. del: Hitra ozemljitvena stikala
na izmenični tok za ugašanje sekundarnega obloka na prenosnih vodih (IEC 62271
-112:2021)
High-voltage switchgear and controlgear - Part 112: Alternating current high-speed
earthing switches for secondary arc extinction on transmission lines (IEC 62271-
112:2021)
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 112: Schnellschaltende
Wechselstrom-Erdungsschalter zum Löschen von sekundären Lichtbögen auf
Freileitungen (IEC 62271-112:2021)
Appareillage à haute tension - Partie 112: Sectionneurs de terre rapides à courant
alternatif pour l'extinction de l'arc secondaire sur les lignes de transport (IEC 62271-
112:2021)
Ta slovenski standard je istoveten z: EN IEC 62271-112:2021
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62271-112
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2021
ICS 29.130.10; 29.130.99 Supersedes EN 62271-112:2013 and all of its
amendments and corrigenda (if any)
English Version
High-voltage switchgear and controlgear - Part 112: Alternating
current high-speed earthing switches for secondary arc
extinction on transmission lines
(IEC 62271-112:2021)
Appareillage à haute tension - Partie 112: Sectionneurs de Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil
terre rapides à courant alternatif pour l'extinction de l'arc 112: Schnellschaltende Wechselstrom-Erdungsschalter
secondaire sur les lignes de transport zum Löschen von sekundären Lichtbögen auf Freileitungen
(IEC 62271-112:2021) (IEC 62271-112:2021)
This European Standard was approved by CENELEC on 2021-08-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62271-112:2021 E
European foreword
The text of document 17A/1311/FDIS, future edition 2 of IEC 62271-112, prepared by SC 17A
“Switching devices” of IEC/TC 17 “High-voltage switchgear and controlgear” was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62271-112:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–05–17
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–08–17
document have to be withdrawn
This document supersedes EN 62271-112:2013 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62271-112:2021 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-441 1984 International Electrotechnical Vocabulary - -
(IEV) - Part 441: Switchgear, controlgear
and fuses
+ A1 2000 - -
IEC 62271-1 2017 High-voltage switchgear and controlgear - EN 62271-1 2017
Part 1: Common specifications for
alternating current switchgear and
controlgear
IEC 62271-100 2021 High-voltage switchgear and controlgear - - -
Part 100: Alternating-current circuit-
breakers
IEC 62271-102 2018 High-voltage switchgear and controlgear - EN IEC 62271-102 2018
Part 102: Alternating current disconnectors
and earthing switches
IEC 62271-200 2011 High-voltage switchgear and controlgear - EN 62271-200 2012
Part 200: AC metal-enclosed switchgear
and controlgear for rated voltages above
1 kV and up to and including 52 kV
IEC 62271-112 ®
Edition 2.0 2021-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
High-voltage switchgear and controlgear –
Part 112: Alternating current high-speed earthing switches for secondary arc
extinction on transmission lines
Appareillage à haute tension –
Partie 112: Sectionneurs de terre rapides à courant alternatif pour l’extinction de
l’arc secondaire sur les lignes de transport
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.130.10; 29.130.99 ISBN 978-2-8322-1001-6
– 2 – IEC 62271-112:2021 IEC 2021
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Normal and special service conditions . 8
5 Ratings . 8
6 Design and construction . 10
7 Type tests . 12
8 Routine tests . 15
9 Guide to the selection of HSESs (informative) . 15
10 Information to be given with enquiries, tenders and orders (informative) . 15
11 Transport, storage, installation, operating instructions and maintenance. 15
12 Safety . 16
Annex A (informative) Background information on the use of HSESs . 17
Annex B (informative) Induced current and voltage conditions for other cases . 22
Bibliography . 27
Figure 1 – Explanation of a multi-phase auto-reclosing scheme . 7
Figure 2 – Timing chart of HSES and circuit-breakers . 10
Figure A.1 – Single-line diagram of a power system . 18
Figure A.2 – Timing chart of the HSESs in relation to the transmission line circuit-
breakers . 18
Figure A.3 – Typical timing chart showing the time between fault initiation and a
successful re-close of the transmission line circuit-breakers . 19
Figure B.1 – System condition to explain successive fault . 23
Figure B.2 – Example of waveforms of delayed current zero phenomena . 23
Figure B.3 – Typical test circuit for electromagnetic coupling test-duty of a HSES with
delayed current zero crossings . 25
Figure B.4 – Typical test circuit for electrostatic coupling test-duty of HSES with
delayed current zero crossings . 25
Table 1 – Nameplate information . 11
Table 2 – Standard values of rated induced currents and voltages . 13
Table A.1 – Comparison of earthing switches . 20
Table A.2 – Comparison of a four-legged reactor and HSES . 21
Table B.1 – Preferred values for single-phase earth fault with delayed current zero
phenomena in the presence of a successive fault . 24
Table B.2 – Preferred values for multi-phase earth faults in a double-circuit system . 26
Table B.3 – Preferred values for covering the cases of categories 0 and 1 . 26
IEC 62271-112:2021 IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR –
Part 112: Alternating current high-speed earthing switches
for secondary arc extinction on transmission lines
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or ag
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.