EN 50438:2013/IS1:2015
Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks
Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks
Anforderungen für den Anschluss von Klein-Generatoren an das öffentliche Niederspannungsnetz
Exigences pour les installations de micro-génération destinées à être raccordées en parallèle avec les réseaux publics de distribution à basse tension
Zahteve za vzporedno vezavo mikro generatorjev z javnim nizkonapetostnim razdelilnim omrežjem - Dopolnilo IS1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2015
Zahteve za vzporedno vezavo mikro generatorjev z javnim nizkonapetostnim
razdelilnim omrežjem - Dopolnilo IS1
Requirements for micro-generating plants to be connected in parallel with public low-
voltage distribution networks
Anforderungen für den Anschluss von Klein-Generatoren an das öffentliche
Niederspannungsnetz
Exigences pour les installations de micro-génération destinées à être raccordées en
parallèle avec les réseaux publics de distribution à basse tension
Ta slovenski standard je istoveten z: EN 50438:2013/IS1:2015
ICS:
29.160.20 Generatorji Generators
29.240.01 2PUHåMD]DSUHQRVLQ Power transmission and
GLVWULEXFLMRHOHNWULþQHHQHUJLMH distribution networks in
QDVSORãQR general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERPRETATION SHEET EN 50438:2013/IS1
FEUILLE D'INTERPRETATION
INTERPRETATIONSBLATT
May 2015
ICS 29.160.20
English Version
Requirements for micro-generating plants to be connected in
parallel with public low-voltage distribution networks
Exigences pour les installations de micro-génération Anforderungen für den Anschluss von Klein-Generatoren an
destinées à être raccordées en parallèle avec les réseaux das öffentliche Niederspannungsnetz
publics de distribution à basse tension
This European Standard was approved by CENELEC on 2015-04-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50438:2013/IS1:2015 E
Foreword
This Interpretation Sheet to the European Standard EN 50438:2013 was prepared by
CLC/TC 8X “System aspects of electrical energy supply”.
Two topics are clarified:
- The considerations when applying EN 50438:2013 instead of EN 50438:2007;
- The intentional delay on the activation of the power response to over-frequency.
EN 50438:2013 has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association.
__________
Text of IS1 to EN 50438:2013
1 Application of EN 50438:2013 instead of EN 50438:2007
Clause
Foreword (dow) 2016-11-04
In its foreword, the latest date by which the national standards conflicting with EN 50438:2013 have to
be withdrawn, is fixed to 2016-11-04.
It has been reported that the EN 50438:2013 has some new functionalities that are no
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.