EN IEC 62512:2020
(Main)Electric clothes washer-dryers for household use - Methods for measuring the performance
Electric clothes washer-dryers for household use - Methods for measuring the performance
IEC 62512:2012 provides a globally applicable and agreed method to test the washing and drying function of washer-dryers. Although this standard is based on IEC 61121:2012 on tumble dryers and IEC 60456:2010 on clothes washers, it specifies the conditions needed to test the combined function of washing and drying. The main elements of this standard are: - the definition of the loads to be tested in continuous and interrupted operation cycles; - the method for testing automatic and not automatic operation of the drying cycles; - the way to handle the load for interrupted operation cycles; - the correction to be applied to test results for continuous and interrupted operation cycles.
Elektrische Wasch-Trockner für den Hausgebrauch - Prüfverfahren zur Bestimmung der Gebrauchseigenschaften
Lavantes-séchantes électriques à usage domestique - Méthodes de mesure de l'aptitude à la fonction
La CEI 62512:2012 fournit une méthode d'application générale et convenue permettant de soumettre à essai la fonction de lavage et de séchage des lavantes-séchantes. Bien que fondée sur la CEI 61121:2012 relative aux sèche-linge à tambour et sur la CEI 60456:2010 relative aux machines à laver le linge, la présente norme spécifie les conditions qu'il est nécessaire d'appliquer pour soumettre à essai la fonction combinée de lavage et de séchage. La présente norme spécifie les principaux éléments suivants: - la définition des charges à soumettre à essai au cours de cycles d'opération continus et interrompus; - la méthode d'essai des opérations automatiques et non automatiques des cycles de séchage; - le mode de traitement de la charge pour les cycles d'opération interrompus; - la correction à appliquer aux résultats d'essai des cycles d'opération continus et interrompus.
Električni pralno-sušilni stroji za uporabo v gospodinjstvu - Metode za merjenje funkcionalnosti
Ta mednarodni standard določa metode za preskušanje učinkovitosti gospodinjskih kombiniranih pralno-sušilnih strojev pri pranju in sušenju tekstilnih izdelkov. Ta mednarodni standard se ne uporablja za preskušanje posamezne funkcije pranja oziroma sušenja.
Cilj standarda je določiti in opredeliti glavne značilnosti delovanja gospodinjskih električnih pralno-sušilnih strojev, ki zanimajo uporabnike, ter opisati standardne metode za merjenje teh značilnosti.
OPOMBA: Področje uporabe tega standarda vključuje tudi pralno-sušilne stroje za javno uporabo v stanovanjskih blokih ali samopostrežnih pralnicah. Standard se ne uporablja za pralno-sušilne stroje za uporabo v komercialnih pralnicah.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2021
Nadomešča:
SIST EN 50229:2015
SIST EN 50229:2015/AC:2016
Električni pralno-sušilni stroji za uporabo v gospodinjstvu - Metode za merjenje
funkcionalnosti
Electric clothes washer-dryers for household use - Methods for measuring the
performance
Elektrische Wasch-Trockner für den Hausgebrauch - Prüfverfahren zur Bestimmung der
Gebrauchseigenschaften
Lavantes-séchantes électriques à usage domestique - Méthodes de mesure de l’aptitude
à la fonction
Ta slovenski standard je istoveten z: EN IEC 62512:2020
ICS:
97.060 Aparati za nego perila Laundry appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62512
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2020
ICS 97.060 Supersedes EN 50229:2015 and all of its amendments
and corrigenda (if any)
English Version
Electric clothes washer-dryers for household use - Methods for
measuring the performance
(IEC 62512:2012 , modified)
Lavantes-séchantes électriques à usage domestique - Elektrische Wasch-Trockner für den Hausgebrauch -
Méthodes de mesure de l'aptitude à la fonction Prüfverfahren zur Bestimmung der
(IEC 62512:2012 , modifiée) Gebrauchseigenschaften
(IEC 62512:2012 , modifiziert)
This European Standard was approved by CENELEC on 2012-11-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62512:2020 E
European foreword
The text of document 59D/403/FDIS, future edition 1 of IEC 62512, prepared by SC 59D "Performance
of household and similar electrical laundry appliances" of IEC/TC 59 "Performance of household and
similar electrical appliances" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62512:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-05-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-11-13
document have to be withdrawn
This document supersedes EN 50229:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of
Endorsement notice
The text of the International Standard IEC 62512:2012 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60456 (mod) 2010 Clothes washing machines for household EN 60456 2016
use - Methods for measuring the
performance
+A11 2020
IEC 60704-2-4 - Household and similar electrical appliances EN 60704-2-4 -
(mod) - Test code for the determination of
airborne acoustical noise - Part 2-4:
Particular requirements for washing
machines and spin extractors
+A11 2020
IEC 60704-2-6 - Household and similar electrical appliances EN 60704-2-6 -
- Test code for the determination of
airborne acoustical noise - Part 2-6:
Particular requirements for tumble dryers
IEC 61121 (mod) 2012 Tumble dryers for household use - EN 61121 2013
Methods for measuring the performance
+A11 2019
ISO 80000-1 2009 Quantities and units -- Part 1: General EN ISO 80000-1 2013
IEC 62512 ®
Edition 1.0 2012-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric clothes washer-dryers for household use – Methods for measuring the
performance
Lavantes-séchantes électriques à usage domestique – Méthodes de mesure de
l’aptitude à la fonction
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
N
CODE PRIX
ICS 97.060 ISBN 978-2-83220-387-3
– 2 – 62512 © IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and symbols . 6
3.1 Terms and definitions . 6
3.2 Symbols . 8
4 Requirements . 8
5 Test conditions, materials, equipment and instrumentation . 8
5.1 General . 8
5.2 Ambient temperature and humidity . 8
6 Preparation for testing . 8
7 Performance measurements – General requirements . 9
8 Tests for performance . 9
8.1 Determination of the washing performance . 9
8.2 Determination of the water extraction performance and rinsing performance . 9
8.3 Determination of the water and energy consumption and programme time . 9
8.3.1 General . 9
8.3.2 Washing cycle . 9
8.3.3 Drying cycle . 9
8.3.4 Determination of energy consumption in "off" mode and "left on"
mode . 11
9 Assessment of performance . 11
9.1 General . 11
9.2 Determination of the airborne acoustical noise . 12
10 Data to be reported . 12
Annex A (normative) Splitting of the base load . 13
Annex B (informative) Suggested forms in which the data are reported . 14
Table 1 – List of symbols . 8
Table A.1 – Composition of loads for rated capacities of 8 and 9 kg . 13
Table A.2 – Corrected composition of load for a rated drying capacity of 8 kg . 13
62512 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRIC CLOTHES WASHER-DRYERS FOR HOUSEHOLD USE –
METHODS FOR MEASURING THE PERFORMANCE
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International standard IEC 62512 has been prepared by subcommittee 59D: Home laundry
appliances, of IEC Technical Committee 59: Performance of household and similar electrical
appliances.
The text of this standard is based on the following documents:
FDIS Report on voting
59D/403/FDIS 59D/407/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.