EN 61307:2006
(Main)Industrial microwave heating installations - Test methods for the determination of power output
Industrial microwave heating installations - Test methods for the determination of power output
Specifies test methods for industrial microwave heating installations. Is applicable to industrial microwave heating equipment and installations used for the purpose of thermal application to loads containing water or moisture.
Industrielle Mikrowellen-Erwärmungsanlagen - Messverfahren für die Bestimmung der Ausgangsleistung
Installations industrielles de chauffage à hyperfréquence - Méthodes d'essais pour la détermination de la puissance de sortie
Spécifie les méthodes d'essais pour les installations industrielles de chauffage à hyperfréquence. Est applicable aux installations et équipements industriels de chauffage à hyperfréquence utilisés dans le cadre d'applications thermiques pour charges contenant de l'eau ou de l'humidité.",PE
Industrijske inštalacije za mikrovalovno segrevanje – Preskusne metode za ugotavljanje izhodne moči (IEC 61307:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2006
,QGXVWULMVNHLQãWDODFLMH]DPLNURYDORYQRVHJUHYDQMH±3UHVNXVQHPHWRGH]D
XJRWDYOMDQMHL]KRGQHPRþL,(&
Industrial microwave heating installations - Test methods for the determination of power
output
Industrielle Mikrowellen-Erwärmungsanlagen - Messverfahren für die Bestimmung der
Ausgangsleistung
Installations industrielles de chauffage à hyperfréquence - Méthodes d'essais pour la
détermination de la puissance de sortie
Ta slovenski standard je istoveten z: EN 61307:2006
ICS:
25.180.10
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61307
NORME EUROPÉENNE
May 2006
EUROPÄISCHE NORM
ICS 25.180.10 Supersedes EN 61307:1996
English version
Industrial microwave heating installations -
Test methods for the determination of power output
(IEC 61307:2006)
Installations industrielles de chauffage Industrielle Mikrowellen-
à hyperfréquence - Erwärmungsanlagen -
Méthodes d'essais pour la détermination Meßverfahren für die Bestimmung der
de la puissance de sortie Ausgangsleistung
(CEI 61307:2006) (IEC 61307:2006)
This European Standard was approved by CENELEC on 2006-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61307:2006 E
Foreword
The text of document 27/509/FDIS, future edition 2 of IEC 61307, prepared by IEC TC 27, Industrial
electroheating equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 61307 on 2006-04-01.
This European Standard supersedes EN 61307:1996.
The most significant change is that the microwave power output of type B equipment has to be measured
by an open-dish load (6.4).
This standard is to be used in conjunction with EN 60519-1 and EN 60519-6.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61307:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61307:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60050-726 1982 International electrotechnical vocabulary - - -
Chapter 726: Transmission lines and
waveguides
IEC 60050-841 2004 International electrotechnical vocabulary - -
Part 841: Industrial electroheat
1) 2)
IEC 60519-1 – Safety in electroheat installations EN 60519-1 2003
Part 1: General requirements
1) 2)
IEC 60519-6 – Safety in electroheat installations EN 60519-6 2002
Part 6: Specifications for safety in industrial
microwave heating equipment
1) 2)
IEC 61308 – High-frequency dielectric heating installations EN 61308 2006
- Test methods for the determination of power
output
1)
Undated reference.
2)
Valid edition at date of issue.
NORME CEI
INTERNATIONALE
IEC
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2006-02
Installations industrielles de chauffage
à hyperfréquence –
Méthodes d'essais pour la détermination
de la puissance de sortie
Industrial microwave heating installations –
Test methods for the determination
of power output
IEC 2006 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
J
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
61307 IEC:2006 – 3 –
CONTENTS
FOREWORD.5
1 Scope and object.9
2 Normative references .9
3 Terms and definitions .11
4 Types of equipment and their output power .11
4.1 Types of equipment .11
4.2 Microwave output power of type A equipment.13
4.3 Microwave output power of type B equipment.13
5 Power output test loads .13
5.1 General .13
5.2 Calorimeter load.13
5.3 Dummy load .13
5.4 Open-dish load.13
6 Description of tests.13
6.1 General .13
6.2 Calorimeter load.15
6.3 Dummy load .17
6.4 Open-dish load.17
61307 IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL MICROWAVE HEATING INSTALLATIONS –
TEST METHODS FOR THE DETERMINATION
OF POWER OUTPUT
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61307 has been prepared by IEC technical committee 27: Industrial
electroheating equipment.
This second edition cancels and replaces the first edition published in 1994. It constitutes a
technical revision and covers some minor changes compared with the first edition. The most
significant change is that the microwave power output of type B equipment has to be measured
by an open-dish load (6.4).
This standard is to be used in conjunction with IEC 60519-1 and IEC 60519-6.
61307 IEC:2006 – 7 –
The text of this standard is based on the following documents:
FDIS Report on voting
27/509/FDIS 27/516/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
61307 IEC:2006 – 9 –
INDUSTRIAL MICROWAVE HEATING INSTALLATIONS –
TEST METHODS FOR THE DETERMINATION
OF POWER OUTPUT
1 Scope and object
This International Standard is applicable to industrial microwave heating equipment and
installations used for the purpose of thermal application to loads containing water or moisture.
These applications comprise heating and drying of partially conductive or non-conductive
materials, such as wood, textiles, paper, foodstuffs, etc., in both normal and protective
atmospheres, using for example, inert gas, vacuum or heating materials, which respond to
microwaves showing heating effects. For other loads (for example, plastics), the test methods
are under consideration.
This standard relates to microwave heating installations in the frequency range from 300 MHz to
300 GHz.
This standard relates to microwave heating equipment normally operating under continuous
rated conditions.
Equipment operating at the lower range of the microwave frequency spectrum, i.e. between
300 MHz and 600 MHz, may use vacuum tubes or alternative microwave emitters. If the power
output measurement systems specified in this standard cannot be applied for particular
applications within this frequency range, then the applicable systems would be those of
IEC 61308.
The main purpose of this standard is to specify test methods for indus
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.