iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

HD 416.2 S1:1987

(Main)

Specification for vulcanized fibre for electrical purposes - Part 2: Methods of test

Specification for vulcanized fibre for electrical purposes - Part 2: Methods of test

Covers vulcanized fibre sheets, flat or corrugated sheets, round rods and round tubes suitable as electrical insulation. Materials made by combining with an adhesive several thicknesses of vulcanized fibre are not covered by this standard.

Bestimmung für Vulkanfiber für die Elektrotechnische Zwecke - Teil 2: Prüfverfahren

Spécification pour les fibres vulcanisées à usages électriques - Partie 2: Méthodes d'essai

Concerne les feuilles planes ou ondulées, les barres et les tubes de section circulaire en fibre vulcanisée convenant comme isolants électriques. Les matériaux composites constitués de plusieurs couches de fibre vulcanisée assemblées par un adhésif ne sont pas couverts.

Specification for vulcanized fibre for electrical purposes - Part 2: Methods of test (IEC 60667-2:1982 + IEC 60667-2:1982/A1:1986)

General Information

Status
Withdrawn
Publication Date
14-Dec-1987
Withdrawal Date
30-Sep-1988
ICS
29.035.10 - Paper and board insulating materials
Technical Committee
CLC/SR 15 - Insulating materials
Drafting Committee
IEC/TC 15 - IEC_TC_15
Parallel Committee
IEC/SC 15C - IEC_SC_15C
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
17-Jun-2023
Completion Date
17-Jun-2023
Ref Project
SIST HD 416.2 S1:1998 - Specification for vulcanized fibre for electrical purposes -- Part 2: Methods of test

Relations

Replaced By
EN IEC 60667-2:2020 - Vulcanized fibre for electrical purposes - Part 2: Methods of test
Effective Date
07-Jul-2020

Buy Standard

HD 416.2 S1:1998HD 416.2 S1:1998
PreviousNext
Standardization document
HD 416.2 S1:1998
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-1998
Specification for vulcanized fibre for electrical purposes - Part 2: Methods of test
(IEC 60667-2:1982 + IEC 60667-2:1982/A1:1986)
Specification for vulcanized fibre for electrical purposes -- Part 2: Methods of test
Bestimmung für Vulkanfiber für die Elektrotechnische Zwecke -- Teil 2: Prüfverfahren
Spécification pour les fibres vulcanisées à usages électriques -- Partie 2: Méthodes
d'essai
Ta slovenski standard je istoveten z: HD 416.2 S1:1987
ICS:
29.035.10 Papirni in kartonski izolacijski Paper and board insulating
materiali materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST HD 416.2 S1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 60763-2:2007/A1:2023(Amendment)
Specification for laminated pressboard - Part 2: Methods of test
SIST EN 60763-2:2007/A1:2024
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60667-2:2020(Main)
Vulcanized fibre for electrical purposes - Part 2: Methods of test
SIST EN IEC 60667-2:2020

IEC 60667-2:2020 gives methods of test for vulcanized fibre sheets for electrical purposes. Material made by combining with an adhesive several thicknesses of vulcanized fibre is not covered by this document. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. Safety warning: It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner. This second edition cancels and replaces the first edition published in 1982. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) added Terms and definitions b) added General notes on tests c) added Thickness instead of dimension d) changed Apparent density from Density e) added Arc resistance f) deleted Sulphate content g) added method (Bending) for flexibility h) changed test method for internal ply adhesion i) added Shrinkage

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60667-1:2020(Main)
Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements
SIST EN IEC 60667-1:2020

IEC 60667-1:2020 gives the definitions and general requirements for vulcanized fibre sheets for electrical purposes. Materials made by combining with an adhesive several thicknesses of vulcanized fibre are not covered by this document. Materials that conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. Safety warning: it is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner. This second edition cancels and replaces the first edition published in 1980. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
deletion of "corrugated, round rods, and round tubes" from the Scope;
types A, B and C replaced by general and fishpaper types and addition of a symbol for each type in the classification;
addition of white, blue, brown, and addition of a symbol for each colour;
deletion of the thickness of 15,0 mm, the length, the mass and the dimension of rolls from the general requirements;
addition of the manufacturer's name, trademark (if any), nominal thickness, manufacture date, and lot number in the conditions of supply.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60667-3-1:2020(Main)
Vulcanized fibre for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Flat sheets
SIST EN IEC 60667-3-1:2020

IEC 60667-3-1: 2020 gives requirements for vulcanized fibre sheets for electrical purposes. Materials made by combining with an adhesive several thicknesses of vulcanized fibre are not covered by this document. Materials that conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. Safety warning: it is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner. This second edition cancels and replaces the first edition published in 1986. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
change to the range of thickness deviation in Table 1;
addition of apparent density in Table 1;
change to the range of thickness for tensile strength in Table 1;
addition of flexibility and shrinkage in Table 1;
change test method and property value of internal ply adhesion on Table 1.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60819-3-4:2014(Main)
Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles
SIST EN 60819-3-4:2014

IEC 60819-3-4:2013 specifies requirements for two types of aramid fibre paper containing mica particles and designated as PAaM: - type 1: calendered aramid paper containing mica particles; - type 2: uncalendered aramid paper containing mica particles. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. SAFETY WARNING: It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: the document was updated including new thicknesses and relevant values as from Table 1. Keywords: aramid fibre paper containing mica particles, PAaM, calendered, uncalendered

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60819-1:2012(Main)
Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements
SIST EN 60819-1:2013

IEC 60819-1:2009 gives the definitions and general requirements for non-cellulosic papers for electrical purposes. The main changes from the previous edition are as follows: the list of materials to be used in combination was updated with the addition of new materials made available by progress in technology and described in Subclauses 2.7 and 2.8.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60819-3-3:2011(Main)
Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers
SIST EN 60819-3-3:2012

IEC 60819-3-3:2011 is a sheet of IEC 60819-3 specifies requirements for four types of unfilled aramid papers: - Type 1: calendered paper; - Type 2: calendered paper, with improved tearing resistance and conformability; - Type 3: uncalendered paper; - Type 4: calendered paper, with lower density for laminating. This edition includes the following significant technical changes with respect to the previous edition: - normative references change: all the requirements are now determined according the clauses of test methods from IEC 60819-2 specific for non cellulosic papers, instead of IEC 60554-2:2001 generally valid for cellulosic papers; - and some new, very thin thicknesses, of type 4, calendered paper with lower density for laminating, were added.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60763-1:2011(Main)
Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general requirements
SIST EN 60763-1:2011

IEC 60763-1:2010 contains the definitions required for the understanding of all three parts of IEC 60763, the classification of material into types, and the general requirements applicable to all material covered by the standard. The main changes with respect to the previous edition is that the specification was brought in line with the second edition of IEC 60641-1(2007).

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60763-3-1:2011(Main)
Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2
SIST EN 60763-3-1:2011

IEC 60763-3-1:2010 gives the requirements for laminated precompressed boards comprised of 100 % sulphate wood pulp. The main changes with respect to the previous edition are: - requirements for the new properties in Part 2 have been integrated; - specifications for type LB3.3.1 and LB3.3.2 have been deleted.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60641-3-1:2008(Main)
Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1
SIST EN 60641-3-1:2008

IEC 60641-3-1:2008 gives the requirements for pressboard for electrical purposes comprised of 100 % sulphate wood pulp or a mixture of sulphate wood pulp and cotton. The main changes with respect to the previous edition are: - Requirements for types B.0.3 and B.5.3 were added; - The precompressed type B.3.1 was divided in B.3.1A and B.3.1B (higher flexibility); - Types B.6.1 has been replaced with a new type, but the designation has been kept; - Type B.7.1 has been deleted; - The thickness relation of the properties has been simplified; and - The values were adjusted to today's needs of users.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day