EN IEC 62561-5:2024
(Main)Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
IEC 62561-5:2023 is available as IEC 62561-5:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62561-5:2023 specifies the requirements and tests for earth electrode inspection housings (earth housings) installed in the earth and for earth electrode seals. Lightning protection system components (LPSC) can also be suitable for use in hazardous atmospheres. For this reason, there are additional requirements when installing the components under such conditions. This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) A classification of earth electrode seals has been added.
Blitzschutzsystembauteile (LPSC) - Teil 5: Anforderungen an Revisionskästen und Erderdurchführungen
Composants des systèmes de protection contre la foudre (CSPF) - Partie 5: Exigences pour les regards de visite et les joints des électrodes de terre
IEC 62561-5:2023 est disponible sous forme de IEC 62561-5:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62561-5:2023 spécifie les exigences et les essais pour les regards de visite des électrodes de terre (regards de terre) installés dans le sol et pour les joints des électrodes de terre. Les composants des systèmes de protection contre la foudre (CSPF) peuvent aussi être employés dans des atmosphères dangereuses. Pour cette raison, il existe des exigences supplémentaires pour installer les composants dans de telles conditions. Cette troisième édition annule et remplace la deuxième édition parue en 2017. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) une classification des joints d'électrodes de terre a été ajoutée.
Elementi sistema za zaščito pred strelo (LPSC) - 5. del: Zahteve za merilne omarice ozemljil in tesnjenje izolacije pri ozemljilih (IEC 62561-5:2023)
Ta del standarda IEC 62561 določa zahteve in preskuse za pregled ohišja ozemljil (ozemljitvena ohišja), ki so položena v zemljo, in za tesnila ozemljil.
Elementi sistema za zaščito pred strelo (LPSC) so lahko primerni tudi za uporabo v nevarnih ozračjih. Zaradi tega glede namestitve sestavnih delov v takih pogojih obstajajo dodatne zahteve.
OPOMBA: različne zahteve in preskusni postopki so navedeni v skupini standardov EN 124 [2] in skupini standardov EN 1253 [3].
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2024
Elementi sistema za zaščito pred strelo (LPSC) - 5. del: Zahteve za merilne omarice
ozemljil in tesnjenje izolacije pri ozemljilih (IEC 62561-5:2023)
Lightning protection system components (LPSC) - Part 5: Requirements for earth
electrode inspection housings and earth electrode seals (IEC 62561-5:2023)
Blitzschutzsystembauteile (LPSC) - Teil 5: Anforderungen an Revisionskästen und
Erderdurchführungen (IEC 62561-5:2023)
Composants des systèmes de protection contre la foudre (CSPF) - Partie 5: Exigences
pour les regards de visite et les joints des électrodes de terre (IEC 62561-5:2023)
Ta slovenski standard je istoveten z: EN IEC 62561-5:2024
ICS:
91.120.40 Zaščita pred strelo Lightning protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62561-5
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2024
ICS 29.020; 91.120.40 Supersedes EN 62561-5:2017
English Version
Lightning protection system components (LPSC) - Part 5:
Requirements for earth electrode inspection housings and earth
electrode seals
(IEC 62561-5:2023)
Composants des systèmes de protection contre la foudre Blitzschutzsystembauteile (LPSC) - Teil 5: Anforderungen
(CSPF) - Partie 5: Exigences pour les regards de visite et an Revisionskästen und Erderdurchführungen
les joints des électrodes de terre (IEC 62561-5:2023)
(IEC 62561-5:2023)
This European Standard was approved by CENELEC on 2024-01-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62561-5:2024 E
European foreword
The text of document 81/738/FDIS, future edition 3 of IEC 62561-5, prepared by IEC/TC 81 "Lightning
protection" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-10-09
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-01-09
document have to be withdrawn
This document supersedes EN 62561-5:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62561-5:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62305 (series) NOTE Approved as EN 62305 (series)
IEC 62561-5 ®
Edition 3.0 2023-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Lightning protection system components (LPSC) –
Part 5: Requirements for earth electrode inspection housings and earth
electrode seals
Composants des systèmes de protection contre la foudre (CSPF) –
Partie 5: Exigences pour les regards de visite et les joints des électrodes de
terre
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.020, 91.120.40 ISBN 978-2-8322-7934-2
– 2 – IEC 62561-5:2023 © IEC 2023
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Classification . 8
4.1 Earth electrode inspection housings . 8
4.2 Earth electrode seals . 8
5 Requirements . 8
5.1 General . 8
5.2 Documentation and installation instructions . 8
5.3 Marking . 8
5.3.1 Content of marking . 8
5.3.2 Durability and legibility . 9
5.4 Earth electrode inspection housing . 9
5.5 Earth electrode seal . 9
6 Tests . 9
6.1 General . 9
6.2 Documentation and installation instructions . 10
6.2.1 General conditions . 10
6.2.2 Acceptance criteria . 10
6.3 Marking test . 10
6.3.1 General test conditions . 10
6.3.2 Acceptance criteria . 10
6.4 Earth electrode inspection housing . 10
6.4.1 General test conditions . 10
6.4.2 Load test . 10
6.4.3 Acceptance criteria . 12
6.5 Earth electrode seal test . 13
6.5.1 Earth electrode in watertight housing . 13
6.5.2 Earth electrode in or through watertight concrete . 13
7 Electromagnetic compatibility (EMC) . 15
8 Structure and content of the test report . 16
8.1 General . 16
8.2 Report identification . 16
8.3 Specimen description . 16
8.4 Standards and references . 17
8.5 Test procedure . 17
8.6 Testing equipment, description . 17
8.7 Measuring instruments description . 17
8.8 Results and parameters recorded . 17
8.9 Statement of pass or fail . 17
Annex A (normative) Applicability of previous tests . 18
Bibliography . 19
Figure 1 – Test arrangement of the first alternative for load test . 11
IEC 62561-5:2023 © IEC 2023 – 3 –
Figure 2 – Test arrangement of the second alternative for load test . 12
Figure 3 – Test arrangement for sealing test . 13
Figure 4 – Example of a test arrangement for depth of penetration of water under
pressure . 15
Table 1 – Parameters for concrete used for the test arrangement . 14
Table A.1 – Differences in the requirements for earth electrode inspection housings
and earth electrode seals complying with IEC 62561‑5:2011 or IEC 62561‑5:2017. 18
– 4 – IEC 62561-5:2023 © IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) –
Part 5: Requirements for earth electrode inspection housings
and earth electrode seals
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.