EN 61158-5-2:2012

Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements

IEC 61158-5-2:2010(E) defines in an abstract way the externally visible service provided by the Type 2 fieldbus application layer in terms of an abstract model for defining application resources (objects) capable of being manipulated by users via the use of the FAL service, the primitive actions and events of the service; the parameters associated with each primitive action and event, and the form which they take; and the interrelationship between these actions and events, and their valid sequences. This second edition cancels and replaces the first edition published in 2007 and constitutes a technical revision. The main changes with respect to the previous edition are: - Clause 2 and Bibliography: update of normative and bibliographic references; - subclause 6.1.3: update lists with new objects; - subclause 6.2.1.2.6: update of the Time Sync ASE/object (to match new IEC 61558); - new subclause 6.2.1.2.7: new Parameter ASE/object; - subclause 6.2.1.3: update/add services for Time Sync and Parameter ASEs; - subclause 6.2.2.3: minor updates to the Connection Manager ASE services; - subclause 6.4: add Parameter ASE to the object table; - subclause 6.5: update contents of service table for Time Sync and Parameter ASEs.

Industrielle Kommunikationsnetze - Feldbusse - Teil 5-2: Dienstfestlegungen des Application Layer (Anwendungsschicht) - Typ 2-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-2: Définition des services des couches d'application - Eléments de type 2

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 500. del: Definicija opravil aplikacijskega nivoja (IEC 61158-5-2:2010)

Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do komunikacijskega okolja procesnih vodil. Glede na to je mogoče aplikacijski nivo procesnih vodil šteti za »okno med ustreznimi aplikacijami«. Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 2. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta standard na abstrakten način določa zunanje vidno opravilo, ki ga zagotavlja aplikacijski nivo procesnih vodil tipa 2 v zvezi z a) abstraktnim modelom za določanje aplikacijskih virov (objektov), ki jih uporabniki lahko spreminjajo prek opravila aplikacijskega nivoja procesnih vodil, b) primitivnimi dejanji in dogodki opravila; c) parametri, povezanimi z vsakim primitivnim dejanjem in dogodkom, in obliko, ki jo prevzamejo; ter d) medsebojno povezavo med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji. Namen tega standarda je opredeliti opravila, ki se zagotavljajo za a) uporabnika aplikacijskega nivoja procesnih vodil na meji med uporabnikom in aplikacijskim nivojem referenčnega modela procesnih vodil ter b) upravljanje sistemov na meji med aplikacijskim nivojem in upravljanje sistemov referenčnega modela procesnih vodil. Ta standard določa strukturo in opravila aplikacijskega nivoja procesnih vodil tipa 2 v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498-1) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545). Opravila in protokole aplikacijskega nivoja procesnih vodil zagotavljajo aplikacijski osebki (AE) aplikacijskega nivoja procesnih vodil znotraj aplikacijskih procesov. Aplikacijski osebek aplikacijskega nivoja procesnih vodil sestavljata sklop objektno usmerjenih aplikacijskih opravilnih elementov (ASE) in osebek za upravljanje nivojev (LME), ki upravlja aplikacijski osebek. Aplikacijski opravilni elementi zagotavljajo komunikacijska opravila, ki delujejo na sklopu povezanih razredov objektov aplikacijskega procesa (APO). Med aplikacijske opravilne elemente aplikacijskega nivoja procesnih vodil spada aplikacijski opravilni element za upravljanje, ki zagotavlja skupen sklop opravil za upravljanje primerkov razredov aplikacijskega nivoja procesnih vodil.

General Information

• Status: Withdrawn
• Publication Date: 07-Jun-2012
• Withdrawal Date: 27-Mar-2015
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.70 - Application layer
• ICS: 35.110 - Networking
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Parallel Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 22-Sep-2017
• Completion Date: 22-Sep-2017
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61158-5-2:2012 - Industrial communication networks - Fieldbus specifications - Part 500: Application layer service definition (IEC 61158-5-2:2010)

Relations

• Replaces: EN 61158-5-2:2008 - Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements
• Effective Date: 29-Jan-2023
• Replaced By: EN 61158-5-2:2014 - Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2012
1DGRPHãþD
SIST EN 61158-5-2:2008
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 500. del:
Definicija opravil aplikacijskega nivoja (IEC 61158-5-2:2010)
Industrial communication networks - Fieldbus specifications - Part 500: Application layer
service definition (IEC 61158-5-2:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 500: Dienstfestlegungen des
Application Layer (Anwendungsschicht) (IEC 61158-5-2:2010)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-2:
Définition des services des couches d'application - Eléments de type 2 (CEI 61158-5-
2:2010)
Ta slovenski standard je istoveten z: EN 61158-5-2:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61158-5-2
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-5-2:2008

English version
Industrial communication networks -
Fieldbus specifications -
Part 5-2: Application layer service definition -
Type 2 elements
(IEC 61158-5-2:2010)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 5-2: Définition des services des Teil 5-2: Dienstfestlegungen des
couches d'application - Application Layer (Anwendungsschicht) -
Eléments de type 2 Typ 2-Elemente
(CEI 61158-5-2:2010) (IEC 61158-5-2:2010)

This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-5-2:2012 E
Foreword
The text of document 65C/606/FDIS, future edition 2 of IEC 61158-5-2, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-5-2:2012.

The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-28

standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-5-2:2008.
2:2008:
— Clause 2 and Bibliography: update of normative and bibliographic references;
— subclause 6.1.3: update lists with new objects
— subclause 6.2.1.2.6: update of the Time Sync ASE/object (to match new EN 61558)
— new subclause 6.2.1.2.7: new Parameter ASE/object
— subclause 6.2.1.3: update/add services for Time Sync and Parameter ASEs
— subclause 6.2.2.3: minor updates to the Connection Manager ASE services
— subclause 6.4: add Parameter ASE to the object table
— subclause 6.5: update contents of service table for Time Sync and Parameter ASEs
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-5-2:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61131-1 NOTE  Harmonized as EN 61131-1.
IEC 61158-2:2010 NOTE  Harmonized as EN 61158-2:2010 (not modified).
IEC 62026-3 NOTE  Harmonized as EN 62026-3.

- 3 - EN 61158-5-2:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60559 - Binary floating-point arithmetic for HD 592 S1 -
microprocessor systems
IEC 61131-3 2003 Programmable controllers - EN 61131-3 2003
Part 3: Programming languages
IEC/TR 61158-1 2010 Industrial communication networks - Fieldbus CLC/TR 61158-1 2010
specifications -
Part 1: Overview and guidance for the IEC
61158 and IEC 61784 series
IEC 61158-3-2 2007 Industrial communication networks - Fieldbus EN 61158-3-2 2008
specifications -
Part 3-2: Data-link layer service definition -
Type 2 elements
IEC 61158-4-2 2010 Industrial communication networks - Fieldbus EN 61158-4-2 2012
specifications -
Part 4-2: Data-link layer protocol specification
- Type 2 elements
IEC 61158-6-2 2010 Industrial communication networks - Fieldbus EN 61158-6-2 2012
specifications -
Part 6-2: Application layer protocol
specification - Type 2 elements

IEC 61588 2009 Precision clock synchronization protocol for - -
networked measurement and control systems

IEC 61784-3-2 - Industrial communication networks - Profiles - EN 61784-3-2 -
Part 3-2: Functional safety fieldbuses -
Additional specifications for CPF 2

ISO/IEC 646 - Information technology - ISO 7-bit coded - -
character set for information interchange

ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8859 Series Information technology - 8-bit single-byte - -
coded graphic character sets
ISO/IEC 8859-1 - Information technology - 8-bit single-byte - -
coded graphic character sets -
Part 1: Latin alphabet No.1
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer structure

ISO/IEC 10646 - Information technology - Universal multiple-- -
octet coded character set (UCS)

Publication Year Title EN/HD Year

ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services

ISO 639-2 - Codes for the representation of names of - -
languages -
Part 2: Alpha-3 code
ISO 11898 1993 Road vehicles - Interchange of digital - -
information - Controller area network (CAN)
for high-speed communication
IETF RFC 1759 - Printer MIB - -

IEC 61158-5-2 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Fieldbus specifications –
Part 5-2: Application layer service definition – Type 2 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XJ
ICS 25.04.40; 35.100.70; 35.110 ISBN 978-2-88912-105-2
– 2 – 61158-5-2 © IEC:2010(E)
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.8
1.1 Overview .8
1.2 Specifications.9
1.3 Conformance.9
2 Normative references .9
3 Terms, definitions, symbols, abbreviations and conventions .10
3.1 ISO/IEC 7498-1 terms .10
3.2 ISO/IEC 8822 terms .11
3.3 ISO/IEC 9545 terms .11
3.4 ISO/IEC 8824 terms .11
3.5 Type 2 fieldbus data-link layer terms .11
3.6 Type 2 fieldbus application-layer specific definitions.11
3.7 Type 2 abbreviations and symbols.18
3.8 Conventions .19
4 Common concepts.22
5 Data type ASE.22
5.1 General .22
5.2 Formal definition of data type objects .22
5.3 FAL defined data types.22
5.4 Data type ASE service specification .32
6 Communication model specification.32
6.1 Concepts.32
6.2 ASEs.40
6.3 ARs .155
6.4 Summary of FAL classes .192
6.5 Permitted FAL services by AR type .193
Bibliography.195

Figure 1 – Overview of ASEs and object classes .34
Figure 2 – Addressing format using MAC, class, instance and attribute IDs .35
Figure 3 – Identity object state transition diagram .52
Figure 4 – Static Assembly state transition diagram .57
Figure 5 – Dynamic Assembly state transition diagram .58
Figure 6 – Typical timing relationships for acknowledged data production.67
Figure 7 – Example of a COS system with two acking devices .67
Figure 8 – Message flow in COS connection – one Connection object, one consumer.67
Figure 9 – Message flow in COS connection – multiple consumers .68
Figure 10 – CPF2 time synchronization offset clock model.80
Figure 11 – CPF2 time synchronization system with offset clock model .80
Figure 12 – CPF2 time synchronization group startup sequence .83
Figure 13 – Parameter object state transition diagram .89

61158-5-2 © IEC:2010(E) – 3 –
Figure 14 – Example of Find_Next_Object_Instance service . 114
Figure 15 – Transmission trigger timer.149
Figure 16 – Inactivity watchdog timer.150
Figure 17 – Using tools for configuration.151
Figure 18 – Production inhibit timer .152
Figure 19
...