prEN IEC 61643-41:2023
(Main)Low-voltage surge protective devices - Part 41: Surge protective devices connected to DC low-voltage power systems - Requirements and test methods
Low-voltage surge protective devices - Part 41: Surge protective devices connected to DC low-voltage power systems - Requirements and test methods
Überspannungsschutzgeräte für Niederspannung – Teil 41: Überspannungsschutzgeräte für den Einsatz in Niederspannungs-Gleichstromnetzen - Anforderungen und Prüfverfahren
Parafoudres basse tension - Partie 41: Parafoudres connectés aux réseaux basse tension en courant continu - Exigences et méthodes d’essai
Nizkonapetostne naprave za zaščito pred prenapetostnimi udari - 41. del: Naprave za zaščito pred prenapetostnimi udari za nizkonapetostne DC napajalne sisteme - Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2024
Nizkonapetostne naprave za zaščito pred prenapetostnimi udari - 41. del: Naprave
za zaščito pred prenapetostnimi udari za nizkonapetostne DC napajalne sisteme -
Zahteve in preskusne metode
Low-voltage surge protective devices - Part 41: Surge protective devices connected to
DC low-voltage power systems - Requirements and test methods
Ta slovenski standard je istoveten z: prEN IEC 61643-41:2023
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
29.240.10 Transformatorske postaje. Substations. Surge arresters
Prenapetostni odvodniki
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
37A/402/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61643-41 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-11-03 2024-01-26
SUPERSEDES DOCUMENTS:
37A/367/CD, 37A/392/CC
IEC SC 37A : LOW-VOLTAGE SURGE PROTECTIVE DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Casey Granata
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 37B,TC 64,TC 81,TC 82,TC 109
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Low-voltage surge protective devices - Part 41: Surge protective devices connected to DC low-voltage
power systems – Requirements and test methods
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
This document must be read in conjuction with 37A/401/CDV for IEC 61643-01.
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
IEC CDV 61643-41/Ed1 © IEC 2023 – 2 – 37A/402/CDV
1 CONTENTS
2 FOREWORD . 4
3 INTRODUCTION . 6
4 1 Scope . 7
5 2 Normative references . 7
6 3 Terms, definitions and abbreviated terms . 7
7 4 Classification . 8
8 4.13 End of life mode of the SPD-assembly . 8
9 5 Void . 8
10 6 Marking and other product information . 8
11 6.2 List of items . 8
12 6.2.100 Markings which are required on the body, or permanently attached to
13 the body, of the SPD: . 8
14 6.2.101 Information to be provided by the manufacturer: . 8
15 6.2.102 Information which shall be provided by the manufacturer for type
16 testing, as applicable: . 8
17 7 Service conditions . 8
18 8 Requirements . 8
19 8.3 Electrical requirements . 9
20 8.3.9 Behaviour under temporary overvoltages . 9
21 9 Tests . 9
22 9.1 General . 9
23 9.1.1 General testing procedures . 9
24 9.3 Electrical tests . 15
25 9.3.3 Protective conductor current I . 15
PE
26 9.3.5 Operating duty test . 15
27 9.3.6 Disconnectors, SC-means and safety performance of overstressed
28 SPDs . 15
29 9.3.9 Behaviour under temporary overvoltages (TOVs) . 19
30 Annex A (normative) Application of annexes from IEC 61643-01 . 22
31 Annex B (normative) Test voltages for SPDs - U . 23
test
32 Annex C (normative) TOV Ratings . 25
33 C.1 TOV test values for DC power systems . 25
34 Annex D (informative) DC power systems . 27
35 D.1 General information about DC power system grounding and connection
36 naming . 27
37 D.1.1 TT system . 27
38 D.1.2 TN system . 28
39 D.1.3 IT system . 31
40 Bibliography . 33
IEC CDV 61643-41/Ed1 © IEC 2023 – 3 – 37A/402/CDV
42 FIGURES
43 Figure 1 - Procedure for sample preparation for dedicated overstress test . 18
44 Figure 2 – Example of a test circuit for the TOV tests . 19
45 Figure 3 – Timing diagram for the TOV tests . 20
46 Figure D.1 – TT DC distribution system . 27
47 Figure D.2 – TT DC distribution system with a mid-point . 28
48 Figure D.3 – TN-S DC distribution system . 28
49 Figure D.4 – TN-S DC distribution system with a mid-point . 29
50 Figure D.5 – TN-C DC distribution system. 29
51 Figure D.6 – TN-C DC distribution system with a mid-point . 30
52 Figure D.7 – TN-C-S DC distribution system . 30
53 Figure D.8 – TN-C-S DC distribution system with a mid-point . 31
54 Figure D.9 – IT DC distribution system . 31
55 Figure D.10 – IT DC distribution system with a mid-point . 32
57 TABLES
58 Table 1 – Type test requirements for SPDs . 11
59 Table 2 – Prospective short circuit current and time constant . 16
60 Table A.1 - Application of annexes from IEC 61643-01 . 22
61 Table B.1 – Test voltage values . 24
62 Table C.1 – TOV test values for DC power systems . 25
63 Table C.2 – Prospective short-circuit currents for TOV tests . 26
IEC CDV 61643-41/Ed1 © IEC 2023 – 4 – 37A/402/CDV
66 INTERNATIONAL ELECTROTECHNICAL COMMISSION
67 ____________
69 LOW-VOLTAGE SURGE PROTECTIVE DEVICES –
71 Part 41: Surge protective devices connected
72 to DC low-voltage power systems –
73 Requirements and test methods
77 FOREWORD
78 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
79 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
80 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
81 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
82 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
83 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
84 in the subject dealt with may participate in this preparatory work. International, governmental and non -
85 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
86 with the International Organization for Standardization (ISO) in accordance with conditions determined by
87 agreement between the two organizations.
88 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
89 consensus of opinion on the relevant subjects since each technical committee has representation from all
90 interested IEC National Committees.
91 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
92 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
93 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
94 misinterpretation by any end user.
95 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
96 transparently to the maximum extent possible in their national and regional publications. Any divergence
97 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
98 the latter.
99 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
100 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
101 services carried out by independent certification bodies.
102 6) All users should ensure that they have the latest edition of this publication.
103 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
104 members of its technical committees and IEC National Committees for any personal injury, property damage or
105 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
106 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
107 Publications.
108 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
109 indispensable for the correct application of this publication.
110 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
111 patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
112 International Standard IEC 61643-41 has been prepared by subcommittee 37A: Low-voltage
113 surge protective devices, of IEC technical committee 37:Surge arresters.
114 This first edition only contains the specific requirements for SPDs for DC applications.
115 The text of this International Standard is based on the following documents:
FDIS Report on voting
XX/XX/FDIS XX/XX/RVD
117 Full information on the voting for the approval of this International Standard can be found in
118 the report on voting indicated in the above table.
IEC CDV 61643-41/Ed1 © IEC 2023 – 5 – 37A/402/CDV
119 This document has bee
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.