Cable networks for television signals, sound signals and interactive services - Part 106: Optical equipment for systems loaded with digital channels only

IEC 60728-106:2023 lays down the measuring methods, performance requirements and data publication requirements of optical equipment of cable networks for television signals, sound signals and interactive services loaded with digital channels only. This document • applies to all optical transmitters, receivers, amplifiers, directional couplers, isolators, multiplexing devices, connectors and splices used in cable networks; • covers the frequency range 5 MHz to 3 300 MHz; • identifies guaranteed performance requirements for certain parameters; • lays down data publication requirements with guaranteed performance; • describes methods of measurement for compliance testing. All requirements and published data relate to minimum performance levels within the specified frequency range and in well-matched conditions as might be applicable to cable networks for television signals, sound signals and interactive services.

Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste - Teil 106: Optische Geräte für Systeme bei Vollbelegung mit digitalen Kanälen

Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion sonore et services interactifs - Partie 106: Matériel optique pour systèmes soumis à une charge de porteuses exclusivement numériques

L'IEC 60728-106:2023 définit les méthodes de mesurage, les exigences de performance et les exigences de publication des données des matériels optiques des réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion sonore et services interactifs soumis à une charge de porteuses exclusivement numériques. Le présent document: - s'applique à l'ensemble des émetteurs, récepteurs, amplificateurs, coupleurs directifs, isolateurs, multiplexeurs, connecteurs et épissures optiques, utilisés dans les réseaux de distribution par câbles; - couvre la plage de fréquences de 5 MHz à 3 300 MHz; - identifie les exigences de performances assurées pour certains paramètres; - établit les exigences de publication des données avec les performances assurées; - décrit les méthodes de mesurage pour les essais de conformité. Toutes les exigences et données publiées se rapportent aux niveaux de performance minimale dans la plage de fréquences spécifiée et dans des conditions bien adaptées qui peuvent s'appliquer aux réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion sonore et services interactifs.

Kabelska omrežja za televizijske in zvokovne signale ter interaktivne storitve - 106. del: Optična oprema za sisteme z obremenitvami izključno digitaliziranih kanalov (IEC 60728-106:2023)

Standard IEC 60728-106:2023 določa merilne metode, zahteve glede učinkovitosti in zahteve glede objave podatkov za optično opremo kabelskih omrežij za televizijske in zvokovne signale ter interaktivne storitve, ki uporabljajo samo digitalne kanale.
Ta dokument
• se uporablja za vse optične sprejemnike, oddajnike, ojačevalnike, smerne povezovalnike, izolatorje, naprave za multipleksiranje, konektorje in spojnice, ki se uporabljajo v kabelskih omrežjih;
• zajema frekvenčno območje od 5 MHz do 3300 MHz;
• opredeljuje zahteve glede učinkovitosti za določene parametre;
• določa zahteve za objavo podatkov za določene parametre;
• opisuje metode merjenja za preskušanje skladnosti.
Vse zahteve in objavljeni podatki se nanašajo na minimalne stopnje delovanja v določenem frekvenčnem razponu in dobro usklajenih pogojih, ki lahko veljajo za kabelska omrežja za televizijske in zvokovne signale ter interaktivne storitve.

General Information

Status
Published
Publication Date
06-Jul-2023
Current Stage
6060 - Document made available - Publishing
Start Date
07-Jul-2023
Completion Date
07-Jul-2023

Buy Standard

Standard
EN IEC 60728-106:2024
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2024
Kabelska omrežja za televizijske in zvokovne signale ter interaktivne storitve - 106.
del: Optična oprema za sisteme z obremenitvami izključno digitaliziranih kanalov
(IEC 60728-106:2023)
Cable networks for television signals, sound signals and interactive services - Part 106:
Optical equipment for systems loaded with digital channels only (IEC 60728-106:2023)
Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste - Teil 106: Optische
Geräte für Systeme bei Vollbelegung mit digitalen Kanälen (IEC 60728-106:2023)
Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion
sonore et services interactifs - Partie 106: Matériel optique pour systèmes soumis à une
charge de porteuses exclusivement numériques (IEC 60728-106:2023)
Ta slovenski standard je istoveten z: EN IEC 60728-106:2023
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60728-106

NORME EUROPÉENNE
EUROPÄISCHE NORM July 2023
ICS 33.060.40
English Version
Cable networks for television signals, sound signals and
interactive services - Part 106: Optical equipment for systems
loaded with digital channels only
(IEC 60728-106:2023)
Réseaux de distribution par câbles pour signaux de Kabelnetze für Fernsehsignale, Tonsignale und interaktive
télévision, signaux de radiodiffusion sonore et services Dienste - Teil 106: Optische Geräte für Systeme bei
interactifs - Partie 106: Matériel optique pour systèmes Vollbelegung mit digitalen Kanälen
soumis à une charge de porteuses exclusivement (IEC 60728-106:2023)
numériques
(IEC 60728-106:2023)
This European Standard was approved by CENELEC on 2023-07-04. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60728-106:2023 E

European foreword
The text of document 100/3899/FDIS, future edition 1 of IEC 60728-106, prepared by IEC/TC 100
"Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 60728-106:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-07-04
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-07-04
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60728-106:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60068-1 NOTE Approved as EN 60068-1
IEC 60728-1:2014 NOTE Approved as EN 60728-1:2014 (not modified)
IEC 60728-113 NOTE Approved as EN IEC 60728-113
IEC 60728-6:2011 NOTE Approved as EN 60728-6:2011 (not modified)
IEC 60825-2 NOTE Approved as EN 60825-2
IEC 61280-4-2 NOTE Approved as EN 61280-4-2
IEC 61281-1:2017 NOTE Approved as EN IEC 61281-1:2018 (not modified)
IEC 61291-1:2018 NOTE Approved as EN IEC 61291-1:2018 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2 series Environmental testing EN 60068-2 series
IEC 60529 - Degrees of protection provided by EN 60529 -
enclosures (IP Code)
IEC 60728-3 2017 Cable networks for television signals, EN IEC 60728-3 2018
sound signals and interactive services -
Part 3: Active wideband equipment for
cable networks
IEC 60728-11 - Cable networks for television signals, EN IEC 60728-11 -
sound signals and interactive services -
Part 11: Safety
IEC 60728-101 - Cable networks for television signals, EN 60728-101 -
sound signals and interactive services -
Part 101: System performance of forward
paths loaded with digital channels only
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60825-1 - Safety of laser products - Part 1: EN 60825-1 -
Equipment classification and requirements
IEC 61280-1-1 - Fibre optic communication subsystem EN 61280-1-1 -
basic test procedures - Part 1-1: Test
procedures for general communication
subsystems - Transmitter output optical
power measurement for single-mode
optical fibre cable
IEC 61280-1-3 - Fibre optic communication subsystem test EN IEC 61280-1-3 -
procedures - Part 1-3: General
communication subsystems -
Measurement of central wavelength,
spectral width and additional spectral
characteristics
IEC 61290-1 series Optical amplifiers - Test methods - Part 1- EN IEC 61290-1 series
1: Power and gain parameters
IEC 61290-3-2 2008 Optical amplifiers - Test methods - Part 3- EN 61290-3-2 2008
2: Noise figure parameters - Electrical
spectrum analyser method
IEC 61290-5 series Optical amplifiers - Test methods - Part 5: EN 61290-5 series
Reflectance parameters
IEC 61290-6-1 - Optical fibre amplifiers - Basic specification EN 61290-6-1 -
- Part 6-1: Test methods for pump leakage
parameters - Optical demultiplexer
IEC 61290-11 series Optical amplifiers - Test methods - Part 11: EN 61290-11 series
Polarization mode dispersion parameter
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3-6:
Examinations and measurements - Return
loss
IEC 60728-106 ®
Edition 1.0 2023-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Cable networks for television signals, sound signals and interactive services –
Part 106: Optical equipment for systems loaded with digital channels only
Réseaux de distribution par câbles pour signaux de télévision, signaux de
radiodiffusion sonore et services interactifs –
Partie 106: Matériel optique pour systèmes soumis à une charge de porteuses
exclusivement numériques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.060.40 ISBN 978-2-8322-7053-0
– 2 – IEC 60728-106:2023 © IEC 2023
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, graphical symbols and abbreviated terms. 9
3.1 Terms and definitions . 9
3.2 Graphical symbols . 16
3.3 Abbreviated terms . 18
4 Methods of measurement . 19
4.1 Measurement requirements . 19
4.1.1 General . 19
4.1.2 Input specification . 19
4.1.3 Measurement conditions . 19
4.2 Optical power . 19
4.3 Loss, isolation, directivity and coupling ratio . 19
4.3.1 General . 19
4.3.2 Measurement requirements . 19
4.3.3 Measurement procedure . 20
4.4 Return loss . 20
4.5 Saturation output power of an optical amplifier . 20
4.5.1 Purpose . 20
4.5.2 Measurement procedure . 21
4.6 Centroidal wavelength and spectral width under modulation. 21
4.7 Linewidth and chirping of transmitters with single mode lasers . 21
4.7.1 Purpose . 21
4.7.2 Equipment required . 21
4.7.3 General measurement requirements . 22
4.7.4 Measurement procedure . 22
4.7.5 Potential sources of error . 23
4.8 Optical modulation index . 23
4.8.1 Purpose . 23
4.8.2 Equipment required . 23
4.8.3 Measurement procedure . 23
4.8.4 Potential sources of error . 24
4.9 Reference output level of an optical receiver . 24
4.9.1 Purpose . 24
4.9.2 Equipment required . 25
4.9.3 General measurement requirements . 25
4.9.4 Measurement procedure . 25
4.9.5 Potential sources of error . 25
4.10 Slope and flatness . 26
4.10.1 Purpose . 26
4.10.2 Equipment required . 26
4.10.3 Measurement procedure . 26
4.10.4 Potential sources of error .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.