EN 61158-5-12:2012
(Main)Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements
Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements
IEC 61158-5-12:2010(E) specifies the structure and services of the type 12 IEC fieldbus Application Layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498) and the OSI Application Layer Structure (ISO/IEC 9545). This second edition cancels and replaces the first edition published in 2007 and constitutes a technical revision. The main change with respect to the previous edition are: bug fixes and editorial improvements.
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-12: Dienstfestlegungen des Application Layer (Anwendungsschicht) - Typ 12-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-12: Définition des services des couches d'application - Eléments de type 12
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-12. del: Definicija opravil na aplikacijskem nivoju - Elementi tipa 12 (IEC 61158-5-12:2010)
Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do komunikacijskega okolja procesnih vodil. Glede na to je mogoče aplikacijski nivo procesnih vodil šteti za »okno med ustreznimi aplikacijami«. Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 12. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta standard na abstrakten način določa zunanje vidno opravilo, ki ga zagotavljajo različni tipi aplikacijskih nivojev procesnih vodil v zvezi z a) abstraktnim modelom za določanje aplikacijskih virov (objektov), ki jih uporabniki lahko spreminjajo prek opravila aplikacijskega nivoja procesnih vodil, b) primitivnimi dejanji in dogodki opravila; c) parametri, povezanimi z vsakim primitivnim dejanjem in dogodkom, in obliko, ki jo prevzamejo; ter d) medsebojno povezavo med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji. Namen tega standarda je opredeliti opravila, ki se zagotavljajo za a) uporabnika aplikacijskega nivoja procesnih vodil na meji med uporabnikom in aplikacijskim nivojem referenčnega modela procesnih vodil ter b) upravljanje sistemov na meji med aplikacijskim nivojem in upravljanje sistemov referenčnega modela procesnih vodil. Ta standard določa strukturo in opravila aplikacijskega nivoja procesnih vodil IEC v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545). Opravila in protokole aplikacijskega nivoja procesnih vodil zagotavljajo aplikacijski osebki (AE) aplikacijskega nivoja procesnih vodil znotraj aplikacijskih procesov. Aplikacijski osebek aplikacijskega nivoja procesnih vodil sestavljata sklop objektno usmerjenih aplikacijskih opravilnih elementov (ASE) in osebek za upravljanje nivojev (LME), ki upravlja aplikacijski osebek. Aplikacijski opravilni elementi zagotavljajo komunikacijska opravila, ki delujejo na sklopu povezanih razredov objektov aplikacijskega procesa (APO). Med aplikacijske opravilne elemente aplikacijskega nivoja procesnih vodil spada aplikacijski opravilni element za upravljanje, ki zagotavlja skupen sklop opravil za upravljanje primerkov razredov aplikacijskega nivoja procesnih vodil.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2012
1DGRPHãþD
SIST EN 61158-5-12:2008
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-12. del:
Definicija opravil na aplikacijskem nivoju - Elementi tipa 12 (IEC 61158-5-12:2010)
Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer
service definition - Type 12 elements (IEC 61158-5-12:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-12: Dienstfestlegungen des
Application Layer (Anwendungsschicht) - Typ 12-Elemente (IEC 61158-5-12:2010)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-12:
Définition des services des couches d'application - Eléments de type 12 (CEI 61158-5-
12:2010)
Ta slovenski standard je istoveten z: EN 61158-5-12:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61158-5-12
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-5-12:2008
English version
Industrial communication networks -
Fieldbus specifications -
Part 5-12: Application layer service definition -
Type 12 elements
(IEC 61158-5-12:2010)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 5-12: Définition des services des Teil 5-12: Dienstfestlegungen des
couches d'application - Application Layer (Anwendungsschicht) -
Eléments de type 12 Typ 12-Elemente
(CEI 61158-5-12:2010) (IEC 61158-5-12:2010)
This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-5-12:2012 E
Foreword
The text of document 65C/606/FDIS, future edition 2 of IEC 61158-5-12, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-5-12:2012.
The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-28
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-5-12:2008.
12:2008:
— bug fixes and;
— editorial improvements.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-5-12:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC/TR 61158-1:2010 NOTE Harmonized as CLC/TR 61158-1:2010 (not modified).
IEC 61158-2 NOTE Harmonized as EN 61158-2.
IEC 61158-4-12 NOTE Harmonized as EN 61158-4-12.
IEC 61158-6-12 NOTE Harmonized as EN 61158-6-12.
IEC 61784-2 NOTE Harmonized as EN 61784-2.
- 3 - EN 61158-5-12:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61131-3 - Programmable controllers - EN 61131-3 -
Part 1: General information
IEC 61158-3-12 - Industrial communication networks - Fieldbus EN 61158-3-12 -
specifications -
Part 3-12: Data-link layer service definition -
Type 12 elements
ISO/IEC 646 1991 Information technology - ISO 7-bit coded - -
character set for information interchange
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 7498-3 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
Naming and addressing
ISO/IEC 8802-3 - Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access method
and physical layer specifications
ISO/IEC 10646 - Information technology - Universal multiple-- -
octet coded character set (UCS)
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services
IETF RFC 791 - Internet Protocol - DARPA Internet Program - -
Protocol Specification
IEEE 802.1D - IEEE Standard for Local and Metropolitan - -
Area Networks - Media Access Control (MAC)
Bridges
IEC 61158-5-12 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 5-12: Application layer service definition – Type 12 elements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XE
ICS 25.04.40; 35.100.70; 35.110 ISBN 978-2-88912-108-3
– 2 – 61158-5-12 © IEC:2010(E)
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.8
1.1 Overview .8
1.2 Specifications .9
1.3 Conformance.9
2 Normative references.9
3 Terms, definitions, symbols, abbreviations and conventions .10
3.1 Reference model terms and definitions .10
3.2 Service convention terms and definitions .10
3.3 Application layer and data-link service terms and definitions.11
3.4 Common symbols and abbreviations .15
3.5 Conventions .16
4 Concepts .17
4.1 Common concepts.17
4.2 Type specific concepts .17
5 Data type ASE .25
5.1 General .25
5.2 Formal definition of data type objects.25
5.3 FAL defined data types .25
5.4 Data type ASE service specification .33
6 Communication model specification .33
6.1 ASEs .33
6.2 AR. 106
Bibliography . 117
Figure 1 – Producer consumer model .19
Figure 2 – Client server model.19
Figure 3 – Server triggered invocation .19
Figure 4 – Slave reference model.20
Figure 5 – Simple slave device .21
Figure 6 – Complex slave device .22
Figure 7 – Master functional overview.23
Figure 8 – Process output data sequence .34
Figure 9 – Process input data sequence .35
Figure 10 – CoE server model .52
Figure 11 – Successful single SDO-Download sequence .57
Figure 12 – Unsuccessful single SDO-Download sequence.58
Figure 13 – Successful segmented SDO-Download sequence.58
Figure 14 – Successful single SDO-Upload sequence.59
Figure 15 – Unsuccessful single SDO-Upload sequence .60
Figure 16 – Successful segmented SDO-Upload sequence.60
Figure 17 – SDO information sequence .61
61158-5-12 © IEC:2010(E) – 3 –
Figure 18 – Emergency service .62
Figure 19 – Command sequence .63
Figure 20 – PDO mapping .64
Figure 21 – Sync manager PDO assigment.65
Figure 22 – RxPDO service .66
Figure 23 – TxPDO service .67
Figure 24 – RxPDO remote transmission sequence .68
Figure 25 – TxPDO remote transmission sequence .68
Figure 26 – EoE sequence .88
Figure 27 – FoE read sequence with success .95
Figure 28 – FoE read sequence with error .96
Figure 29 – FoE write sequence with success.96
Figure 30 – FoE write sequence with error.97
Figure 31 – FoE write sequence with busy.97
Figure 32 – Successful
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.