EN IEC 62453-302:2023

Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2

Communication Profile Family 2 (commonly known as CIPTM1) defines communication profiles based on IEC 61158-2 Type 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, IEC 61158-6-2, and IEC 62026-3. The basic profiles CP 2/1 (ControlNetTM2), CP 2/2 (EtherNet/IPTM3), and CP 2/3 (DeviceNetTM1) are defined in IEC 61784-1 and IEC 61784-2. An additional communication profile (CompoNetTM1), also based on CIPTM, is defined in [15]. This part of IEC 62453 provides information for integrating the CIPTM technology into the FDT interface specification (IEC 62453-2). This part of IEC 62453 specifies communication and other services. This specification neither contains the FDT specification nor modifies it.

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 302: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 302: Intégration des profils de communication - CPF 2 de l'IEC 61784

IEC 62453-302:2023 est disponible sous forme de IEC 62453-302:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente. L’IEC 62453-302:2023 fournit des informations sur l’intégration de la technologie CIP™ dans la spécification des interfaces des outils des dispositifs de terrain (FDT) (IEC 62453‑2). La Famille de profils de communication 2 (communément appelée CIP™[1]) définit des profils de communication basés sur les normes IEC 61158‑2 Type 2, IEC 61158‑3‑2, IEC 61158‑4‑2, IEC 61158‑5‑2, IEC 61158‑6‑2 et IEC 62026‑3. Les profils de base CP 2/1 (ControlNet™[2]), CP 2/2 (EtherNet/IP™[3]) et CP 2/3 (DeviceNet™1) sont définis dans l’IEC 61784‑1 et l’IEC 61784‑2. Un Profil de communication supplémentaire (CompoNet™1), également basé sur CIP™, est défini dans l’IEC 62026-7. La présente partie de l’IEC 62453 spécifie les services de communication et autres services. La présente spécification ne contient pas la spécification des outils FDT et ne la modifie pas. [1] CIP™ (Common Industrial Protocol), DeviceNet™ et CompoNet™ sont les appellations commerciales de Open DeviceNet Vendor Association, Inc (ODVA). Cette information est donnée à l’intention des utilisateurs du présent document et ne signifie nullement que l’IEC approuve ou recommande le détenteur de la marque ou de l’un quelconque de ses produits. La conformité à la présente norme n’exige pas l’emploi des appellations commerciales CIP™, DeviceNet™ ou CompoNet™. L’utilisation des appellations commerciales CIP™, DeviceNet™ ou CompoNet™ nécessite l’autorisation de Open DeviceNet Vendor Association, Inc. [2] ControlNet™ est l’appellation commerciale de ControlNet International, Ltd. Cette information est donnée à l’intention des utilisateurs du présent document et ne signifie nullement que l’IEC approuve ou recommande le détenteur de la marque ou de l’un quelconque de ses produits. La conformité à ce profil n’exige pas l’emploi de l’appellation commerciale ControlNet™. L’utilisation de l’appellation commerciale ControlNet™ nécessite l’autorisation de ControlNet International, Ltd. [3] EtherNet/IP™ est l’appellation commerciale de ControlNet International, Ltd et de Open DeviceNet Vendor Association, Inc. Cette information est donnée à l’intention des utilisateurs du présent document et ne signifie nullement que l’IEC approuve ou recommande le détenteur de la marque ou de l’un quelconque de ses produits. La conformité à ce profil n’exige pas l’emploi de l’appellation commerciale EtherNet/IP™. L’utilisation de l’appellation commerciale EtherNet/IP™ nécessite l’autorisation de ControlNet International, Ltd. ou de Open DeviceNet Vendor Association, Inc.

Specifikacija vmesnika orodja procesne naprave (FDT) - 302. del: Integracija komunikacijskih profilov - IEC 61784 CPF 2 (IEC 62453-302:2023)

Ta del standarda IEC 62453 podaja informacije za integracijo tehnologije CIP™ v specifikacijo vmesnika orodja procesne naprave (FTD) (IEC 62453-2). Družina komunikacijskega profila 2 (znana kot CIP™1) določa komunikacijske profile, ki temeljijo na standardih IEC 61158-2, tip 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, IEC 61158-6-2 in IEC 62026-3. Osnovni profili CP 2/1 (ControlNet™2), CP 2/2 (EtherNet/IP™3) in CP 2/3 (DeviceNet™1) so določeni v standardih IEC 61784-1 in IEC 61784-2. Dodatni komunikacijski profil (CompoNet™1), ki tudi temelji na CIP™, je določen v IEC 62026- 7.
Ta del standarda IEC 62453 določa komunikacijske in druge storitve.
Ta specifikacija niti ne vsebuje specifikacije orodja procesne naprave niti je ne spreminja.

General Information

• Status: Published
• Publication Date: 14-Dec-2023
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.05 - Multilayer applications
• ICS: 35.110 - Networking
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Dec-2023
• Due Date: 22-Jul-2022
• Completion Date: 15-Dec-2023
• Ref Project: SIST EN IEC 62453-302:2024 - Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 (IEC 62453-302:2023)

Relations

• Replaces: EN 62453-302:2017 - Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2
• Effective Date: 10-Aug-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2024
Specifikacija vmesnika orodja procesne naprave (FDT) - 302. del: Integracija
komunikacijskih profilov - IEC 61784 CPF 2 (IEC 62453-302:2023)
Field device tool (FDT) interface specification - Part 302: Communication profile
integration - IEC 61784 CPF 2 (IEC 62453-302:2023)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 302: Integration von
Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784 (IEC
62453-302:2023)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 302:
Intégration des profils de communication - CPF 2 de l'IEC 61784 (IEC 62453-302:2023)
Ta slovenski standard je istoveten z: EN IEC 62453-302:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62453-302

NORME EUROPÉENNE
EUROPÄISCHE NORM December 2023
ICS 35.100.05; 25.040.40; 35.110 Supersedes EN 62453-302:2017
English Version
Field device tool (FDT) interface specification - Part 302:
Communication profile integration - IEC 61784 CPF 2
(IEC 62453-302:2023)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil
terrain (FDT) - Partie 302: Intégration des profils de 302: Integration von Kommunikationsprofilen -
communication - CPF 2 de l'IEC 61784 Kommunikationsprofilfamilie (CPF) 2 nach IEC 61784
(IEC 62453-302:2023) (IEC 62453-302:2023)
This European Standard was approved by CENELEC on 2023-12-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62453-302:2023 E

European foreword
The text of document 65E/1031/FDIS, future edition 3 of IEC 62453-302, prepared by SC 65E
"Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62453-302:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-12-13
document have to be withdrawn
This document supersedes EN 62453-302:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62453-302:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62453 (series) NOTE Approved as EN 62453 (series)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-2 - Industrial communication networks - EN IEC 61158-2 -
Fieldbus specifications - Part 2: Physical
layer specification and service definition
IEC 61158-3-2 - Industrial communication networks - EN 62258-3-2 -
Fieldbus specifications - Part 3-2: Data-link
layer service definition - Type 2 elements
IEC 61158-4-2 - Industrial communication networks - EN IEC 61158-4-2 -
Fieldbus specifications - Part 4-2: Data-link
layer protocol specification - Type 2
elements
IEC 61158-5-2 2019 Industrial communication networks - EN IEC 61158-5-2 2019
Fieldbus specifications - Part 5-2:
Application layer service definition - Type 2
elements
IEC 61158-6-2 2019 Industrial communication networks - EN IEC 61158-6-2 2019
Fieldbus specifications - Part 6-2:
Application layer protocol specification -
Type 2 elements
IEC 61784-1 - Industrial communication networks - EN IEC 61784-1 -
Profiles Part 1: Fieldbus profiles
IEC 61784-2 - Industrial communication networks - EN IEC 61784-2 -
Profiles - Part 2: Additional fieldbus profiles
for real-time networks based on
ISO/IEC/IEEE 8802-3
IEC 61784-3-2 2021 Industrial communication networks - EN IEC 61784-3-2 2021
Profiles - Part 3-2: Functional safety
fieldbuses - Additional specifications for
CPF 2
IEC 62026-3 - Low-voltage switchgear and controlgear - EN 62026-3 -
Controller-device interfaces (CDIs) - Part 3:
DeviceNet
IEC 62026-7 - Low-voltage switchgear and controlgear - EN 62026-7 -
Controller-device interfaces (CDIs) - Part 7:
CompoNet
1 2
IEC 62453-1 — Field device tool (FDT) interface EN IEC 62453-1 —
specification - Part 1: Overview and
guidance
IEC 62453-2 2022 Field device tool (FDT) interface EN IEC 62453-2 2022
specification - Part 2: Concepts and
detailed description
ISO 15745-2 2003 Industrial automation systems and - -
integration - Open systems application
integration framework - Part 2: Reference
description for ISO 11898-based control
systems
ISO 15745-3 2003 Industrial automation systems and - -
integration - Open systems application
integration framework - Part 3: Reference
description for IEC 61158 based control
systems
Under preparation. Stage at time of publication: IEC/RPUB 62453-1:2022.
Under preparation. Stage at time of publication: prEN IEC 62453-1:2022.
IEC 62453-302 ®
Edition 3.0 2023-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field device tool (FDT) interface specification –

Part 302: Communication profile integration – IEC 61784 CPF 2

Spécification des interfaces des outils des dispositifs de terrain (FDT) –

Partie 302: Intégration des profils de communication – CPF 2 de l'IEC 61784

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40, 35.100.05, 35.110 ISBN 978-2-8322-7780-5

– 2 – IEC 62453-302:2023 © IEC 2023
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, symbols, abbreviated terms and conventions . 8
3.1 Terms and definitions . 8
3.2 Symbols and abbreviated terms . 8
3.3 Conventions . 9
3.3.1 Data type names and references to data types . 9
3.3.2 Vocabulary for requirements . 9
4 Bus category . 9
5 Access to instance and device data . 11
6 Protocol specific behavior . 11
7 Protocol specific usage of general data types . 11
8 Protocol specific common data types . 12
9 Network management data types . 16
9.1 General . 16
9.2 Node address . 16
9.3 Scanner/master – Bus parameter set (CIP) . 16
10 Communication data types. 24
11 Channel parameter data types . 27
12 Device identification . 29
12.1 Device type identification data types . 29
12.2 Topology scan data types . 30
12.3 Scan identification data types . 30
12.4 Device type identification data types . 31
Annex A (informative) Implementation hints . 33
A.1 Addressing in CompoNet DTMs . 33
A.2 Displaying addresses of CompoNet DTMs . 34
A.3 Handling of Config1 and Config2 elements in EtherNet/IP . 34
Bibliography . 35

Figure 1 – Part 302 of the IEC 62453 series . 6
Figure A.1 – Examples of DTM naming for CompoNet . 34

Table 1 – Protocol identifiers . 9
Table 2 – Physical layer identifiers for DeviceNet . 9
Table 3 – Physical layer identifiers for ControlNet . 9
Table 4 – Physical layer identifiers for Ethernet/IP . 10
Table 5 – Physical layer identifiers for CompoNet . 10
Table 6 – Data link layer identifiers . 10
Table 7 – Protocol specific usage of general data types . 11
Table 8 – Simple protocol specific common data types . 12

IEC 62453-302:2023 © IEC 2023 – 3 –
Table 9 – Structured protocol specific common data types . 14
Table 10 – Simple fieldbus configuration data types . 16
Table 11 – Structured fieldbus configuration data types .
...