FprEN IEC 62841-4-3:2020/FprAA

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers

DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
2020-07-15: common mod, no xml

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 4-3: Besondere Anforderungen für handgeführte Rasenmäher

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 4-3: Exigences particulières pour tondeuses à gazon à conducteur à pied

No scope available

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-3. del: Posebne zahteve za ročno vodene vrtne kosilnice - Dopolnilo AA

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN IEC 62841-4-3:2018/oprAA:2018
01-december-2018

(OHNWURPRWRUQDURþQDRURGMDSUHQRVQDRURGMDWHUVWURML]DWUDWRLQYUW9DUQRVW

GHO3RVHEQH]DKWHYH]DURþQRYRGHQHYUWQHNRVLOQLFH'RSROQLOR$$
Electric motor-operated hand-held tools, transportable tools and lawn and garden

machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-

behind lawnmowers
Ta slovenski standard je istoveten z: prEN IEC 62841-4-3:2018/prAA:2018
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
65.060.70 Vrtnarska oprema Horticultural equipment
oSIST prEN IEC 62841-4- en
3:2018/oprAA:2018

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 62841-4-3:2018/oprAA:2018
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62841-4-3:2018/oprAA:2018
EUROPEAN STANDARD DRAFT
prEN IEC 62841-4-3:2018
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
September 2018
ICS
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 4-3: Particular
requirements for pedestrian controlled walk-behind lawnmowers
To be completed To be completed

This draft amendment prAA, if approved, will modify the European Standard prEN IEC 62841-4-3:2018; it is submitted to CENELEC

members for enquiry.
Deadline for CENELEC: 2018-12-21.
It has been drawn up by CLC/TC 116.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which

stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).

A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to

the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,

Switzerland, Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to

provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and

shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Project: 68224 Ref. No. prEN IEC 62841-4-3:2018/prAA:2018 E
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62841-4-3:2018/oprAA:2018
prEN IEC 62841-4-3:2018/prAA:2018
1 European foreword

2 This draft amendment to the draft European Standard prEN IEC 62841-4-3:2018 was prepared by

3 CLC/TC 116 "Safety of motor-operated electric tools". It contains common modifications to 116/385/CDV

4 (future IEC 62841-4-3, Ed. 1) and is submitted to the enquiry.

5 If approved, this draft amendment will be published as EN IEC 62841-4-3:201X/A11:201X.

6 The following dates are proposed:
– latest date by which the existence of this document (doa) dor + 6 months
has to be announced at national level
– latest date by which this document has to be implemented (dop) dor + 12 months
at national level by publication of an identical
national standard or by endorsement
– latest date by which the national standards conflicting (dow) dor + 48 months
with this document have to be withdrawn (to be confirmed or
modified when voting)
7 This European Standard is divided into four parts:

8 Part 1: General requirements which are common to most hand-held electric motor operated tools

9 (for the purpose of this standard referred to simply as tools) which could come within the

10 scope of this standard;

11 Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the

12 requirements given in Part 1 to account for the particular hazards and characteristics of

13 these specific tools.
14 This Part 4-3 is to be used in conjunction with EN 62841-1:2015.

15 This Part 4-3 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to convert it

16 into the European Standard: Particular requirements for pedestrian controlled walk–behind lawnmowers.

17 Where a particular subclause of Part 1 is not mentioned in this Part 4-3, that subclause applies as far as

18 relevant. When this standard states "addition", "modification" or "replacement", the relevant text in Part 1

19 is to be adapted accordingly.
20 The following print types are used:
21 - requirements; in roman type
22 - test specifications: in italic type;
23 - notes: in smaller roman type.
24 The terms defined in Clause 3 are printed in bold typeface.

25 Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting

26 from 101.

27 Clauses, subclauses, notes, tables, figures and annexes which are additional to those in

28 IEC 62841-4-3:201X are prefixed “Z”.
29 This European Standard follows the overall requirements of EN ISO 12100.

30 This document has been prepared under a mandate given to CENELEC by the European Commission

31 and the European Free Trade Association and supports essential requirements of EU Directive(s).

32 For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this

33 document.

34 Compliance with the clauses of Part 1 together with this Part 4-3 provides one means of conforming with

35 the essential health and safety requirements of the Directive concerned.
---------------------- Page: 4 ----------------------
oSIST prEN IEC 62841-4-3:2018/oprAA:2018
prEN IEC 62841-4-3:2018/prAA:2018
36 Text of prAA to prEN IEC 62841-4-3:2018
37 COMMON MODIFICATIONS
38 1 Scope
39 Add the following to the existing Clause 1:

40 Hazards not mentioned in Table ZZ.1 are deemed to be not applicable for tools covered by this standard.

42 19 Mechanical hazards
43 Delete the Subclauses 19.102.6 and 19.102.7.
45 Annex I
46 Replace the title of Annex I with the following:
47 Annex I
48 (normative)
50 Measurement of noise and vibration emissions
52 and delete the NOTE.
---------------------- Page: 5 ----------------------
oSIST prEN IEC 62841-4-3:2018/oprAA:2018
prEN IEC 62841-4-3:2018/prAA:2018
53 Annex K
54 (normative)
56 Battery tools and battery packs
58 Replace the note after K.20.101.3.2 with the following:
59 K.21.18.Z101 Isolation device

60 Machines with an integral battery shall either be equipped with an isolation device to prevent the risk of

61 injury from mechanical hazards during servicing or user maintenance.
62 An isolation device shall

63 – provide disconnection of all poles of the battery from the serviceable region of the tool,

64 – be equipped with an unambiguous indication of the state of the disconnection device which

65 corresponds to each position of its manual control (actuator),
66 – be provided with protection against accidental reconnection.

67 NOTE 1 Examples of methods to achieve this disconnection include removable jumpers, integral batteries that can be

68 disconnected for servicing or user maintenance, or an electromechanical power switch with a direct mechanical link between the

69 actuator and the contact.

70 NOTE 2 The risk of accidental reconnection for a power switch is addressed by the requirement of 21.18.1.2. The other

71 examples in NOTE 1 achieve this by the necessary actions for reconnection.
72 Compliance is checked by inspection and by manual test.
74 Replace the existing K.21.302.1 with the following:

75 K.21.302.1 For machines with integral batteries, there shall be a means of disconnecting the cutting

76 means motor circuit which is separate from the operator presence control. The actuation of this means

77 shall be easily accessible with the machine in its normal operating position.

78 This requirement may be fulfilled by a single device that also fulfills the requirements of a disabling

79 device as specified in K.21.302.2.

80 In addition, this requirement may be fulfilled by a single device that also fulfills the requirements of an

81 isolation device as specified in K.21.18.Z101.
82 Compliance is checked by inspection.
---------------------- Page: 6 ----------------------
oSIST prEN IEC 62841-4-3:2018/oprAA:2018
prEN IEC 62841-4-3:2018/prAA:2018
84 Annex L
85 (normative)
87 Battery tools and battery packs provided with
88 mains connection or non-isolated sources
90 Replace the note after L.20.101.3.2 with the following:
91 L.21.18.Z101 Isolation device

92 Machines with an integral battery shall either be equipped with an isolation device to prevent the risk of

93 injury from mechanical hazards during servicing or user maintenance.
94 An isolation
...