iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 62053-11:2003/A1:2017/AC:2018-05

(Corrigendum)

Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

IEC corrected version

Wechselstrom-Elektrizitätszähler - Besondere Anforderungen - Teil 11: Elektromechanische Wirkverbrauchszähler der Genauigkeitsklassen 0,5, 1 und 2

Équipement de comptage de l'électricité (c.a.) - Prescriptions particulières - Partie 11 : compteurs électromécaniques d'énergie active (classes 0,5, 1 et 2)

Oprema za merjenje električne energije (izmenični tok) - Posebne zahteve - 11. del: Elektromehanski števci delovne energije (razredi 0,5, 1 in 2) - Dopolnilo A1 - Popravek AC

General Information

Status
Published
Publication Date
03-May-2018
ICS
17.220.20 - Measurement of electrical and magnetic quantities
Technical Committee
CLC/TC 13 - Equipment for electrical energy measurement and load control
Drafting Committee
CLC/TC 13 - Equipment for electrical energy measurement and load control
Current Stage
6060 - Document made available - Publishing
Start Date
04-May-2018
Completion Date
04-May-2018
Directive
2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
Mandate
M/441 - Standardisation mandate to CEN, CENELEC and ETSI in the field of measuring instruments for the development of an open architecture for utility meters involving communication protocols enabling interoperability
Ref Project
SIST EN 62053-11:2004/A1:2017/AC:2018 - Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

Relations

Corrects
EN 62053-11:2003/A1:2017 - Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
Effective Date
03-Apr-2018

Buy Standard

EN 62053-11:2004/A1:2017/AC:2018EN 62053-11:2004/A1:2017/AC:2018
PreviousNext
Corrigendum
EN 62053-11:2004/A1:2017/AC:2018
English and French language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wechselstrom-Elektrizitätszähler - Besondere Anforderungen - Teil 11: Elektromechanische Wirkverbrauchszähler der Genauigkeitsklassen 0,5, 1 und 2Équipement de comptage de l'électricité (c.a.) - Prescriptions particulières - Partie 11 : compteurs électromécaniques d'énergie active (classes 0,5, 1 et 2)Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)91.140.50Sistemi za oskrbo z elektrikoElectricity supply systems17.220.20Measurement of electrical and magnetic quantitiesICS:Ta slovenski standard je istoveten z:EN 62053-11:2003/A1:2017/AC:2018-05SIST EN 62053-11:2004/A1:2017/AC:2018en,fr01-oktober-2018SIST EN 62053-11:2004/A1:2017/AC:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 62053-11:2003/A1:2017/ AC:2018-05
May 2018
ICS 17.220.20
English Version
Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) (IEC 62053-11:2003/A1:2016/COR1:2018)
Équipement de comptage de l'électricité (c.a.) - Prescriptions particulières - Partie 11 : compteurs électromécaniques d'énergie active (classes 0,5, 1 et 2) (IEC 62053-11:2003/A1:2016/COR1:2018)
Wechselstrom-Elektrizitätszähler - Besondere Anforderungen - Teil 11: Elektromechanische Wirkverbrauchszähler der Genauigkeitsklassen 0,5, 1 und 2 (IEC 62053-11:2003/A1:2016/COR1:2018) This corrigendum becomes effective on 4 May 2018 for incorporation in the English language version of the EN. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62053-11:2003/A1:2017/AC:2018-05 E SIST EN 62053-11:2004/A1:2017/AC:2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62053-41:2024(Main)
Electricity metering equipment - Particular requirements - Part 41: Static meters for DC energy (classes 0,5 and 1)
SIST EN IEC 62053-41:2024

This part of IEC 62053 applies only to static watt-hour meters of accuracy classes 0,5 and 1 for the measurement of DC electrical energy in DC systems, and it applies to their type tests only. NOTE 1 For other general requirements, such as safety, dependability, etc., see the relevant parts of IEC 62052 or IEC 62059. This document applies to electricity metering equipment designed to: - measure and control electrical energy on electrical networks with two poles where one of the poles is connected to earth and with voltage up to 1 500 V DC; NOTE 2 There are DC networks with other configurations or with more than 2 poles (for example networks with earth and both a positive and a negative pole). - have all functional elements, including add-on modules, enclosed in, or forming a single meter case with the exception of indicating displays; - operate with integrated or detached indicating displays, or without an indicating display; - be installed in a specified matching socket or rack; - optionally, provide additional functions other than those for measurement of electrical energy. They may be used for measuring DC electrical energy, amongst others, in the following application areas: - in EV (electrical vehicle) charging stations or in EV charging infrastructures, if the measurement is placed on the DC side; - in information technology (IT) server farms; - in DC supply points for communication equipment; - in low voltage DC networks for residential or commercial areas, if the measurement is placed on the DC side; - in solar PV (photovoltaic) systems where DC power generation is measured; - in DC supply points for public transport networks (e.g. trolleybus, etc.). Meters designed for operation with low power instrument transformers, LPITs as defined in the IEC 61869 series, may be tested for compliance with this document only if such meters and their LPITs are tested together and meet the requirements for directly connected meters. NOTE 3 Modern electricity meters typically contain additional functions such as measurement of voltage magnitude, current magnitude, power, etc.; measurement of power quality parameters; load control functions; delivery, time, test, accounting, recording functions; data communication interfaces and associated data security functions. The relevant standards for these functions may apply in addition to the requirements of this document. However, the requirements for such functions are outside the scope of this document.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62057-3:2024(Main)
Electrical energy meters - Test equipment, techniques and procedures - Part 3: Automatic meter testing system (AMTS)
SIST EN IEC 62057-3:2024

IEC 62057-3:2024 applies to an automatic meter testing system (AMTS) permanently installed in a controlled environment. It covers the functions, technical requirements and acceptance methods of an AMTS. It also applies to a newly manufactured AMTS to test static active or reactive energy meters on 50 Hz or 60 Hz networks with an AC voltage up to 600 V (phase to neutral). This document defines the kind of AMTS that can continuously and automatically carry out all the test items specified in IEC 62058-31, including visual inspection, AC voltage test, no-load condition, starting current, accuracy and meter constant test. This document does not apply to: • data interfaces to the meter and test procedures of data interface; • industrial controllers, industrial personal computers, and servers supplied along with the AMTS.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62052-11:2021/A12:2024(Amendment)
Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment
SIST EN IEC 62052-11:2021/A12:2024
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62057-1:2023(Main)
Electrical energy meters - Test equipment, techniques and procedures - Part 1: Stationary meter test units (MTUs)
SIST EN IEC 62057-1:2023

IEC 62057-1:2023 applies to stationary meter test units (MTUs) permanently installed in laboratories, used for testing and calibration of electricity meters, in particular for their type test, acceptance test and verification test. It covers the requirements for automatic MTUs for indoor laboratory application and applies to newly manufactured MTUs to test electricity meters on 50 Hz or 60 Hz networks with an AC voltage up to 600 V (phase to neutral). If meters are intended for system voltages not specified in this document, special requirements are agreed between the manufacturer and the purchaser. This document also defines the kind of tests to perform as type tests / routine tests / acceptance tests and commissioning tests for MTUs. It does not apply to: • portable reference meters and portable sources; • electricity meters; • data interfaces to the meter and test procedures of data interface; • transformer operated MTUs; • personal computers supplied together with the MTU.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62052-41:2022(Main)
Electricity metering equipment - General requirements, tests and test conditions - Part 41: Energy registration methods and requirements for multi-energy and multi-rate meters
SIST EN IEC 62052-41:2023

IEC 62052-41:2022 applies only to newly manufactured multi-energy and/or multi-rate static meters and it applies to their type tests only. This document applies to electricity metering equipment designed to: • measure and control electrical energy on networks with voltage up to 1 000 V AC, or 1 500 V DC; • have all functional elements, including add-on modules, enclosed in, or forming a single meter case with exception of indicating displays; • operate with integrated displays; • operate with detached indicating displays, or without an indicating display; • be installed in a specified matching socket or rack; • optionally, provide additional functions other than those for measurement of electrical energy. Meters designed for operation with Low Power Instrument Transformers (LPITs as defined in the IEC 61869 series) may be tested for compliance with this document and the relevant IEC 62053 series documents only if such meters and their LPITs are tested together as directly connected meters. This document does not apply to: • meters for which the voltage line-to-neutral derived from nominal voltages exceeds 1 000 V AC, or 1 500 V DC; • meters intended for connection with low power instrument transformers (LPITs as defined in the IEC 61869 series of standards) when tested without such transformers; • metering systems comprising multiple devices (except for LPITs) physically remote from one another; • portable meters; • meters used in rolling stock, vehicles, ships and airplanes; • laboratory and meter test equipment; • reference standard meters; • data interfaces to the register of the meter; • matching sockets or racks used for installation of electricity metering equipment. This document does not cover measures for the detection and prevention of fraudulent attempts to compromise a meter’s performance (tampering).

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62055-42:2022(Main)
Electricity metering - Payment systems - Part 42: Transaction Reference Numbers (TRN)
SIST EN IEC 62055-42:2022

IEC 62055-42:2022, specifies a token generation mechanism and token structure for smart prepayment functionality in markets where IEC 62055-41 compliant systems are not used, and where a different security mechanism is required by project-specific or national requirements. This document specifies token structure, authentication and an anti-replay mechanism, token operating model, and protocol. This document is informed by the STS Association key management services, and by the key management mechanisms used within the DLMS/COSEM security model within IEC 62056‑6‑2. Reference is made to the international STS token standards (IEC 62055-41, IEC 62055-51 and IEC 62055-52) for payment metering systems, and interworking has been considered where appropriate in terms of token carrier ranges in the decimal domain. IEC 62055-41 tokens and those described in this document are not interoperable, however their domains are designed to be mutually exclusive to ensure the two kinds of tokens do not interfere with each other. Metering application processing and functionality, HAN interface commands and attributes, WAN interface commands and attributes are outside the scope of this document; however, reference is made to other standards in this regard. The mechanism for auditing and retrieving data from the meter relating to tariffication, meter readings, profile data and other legal metrology information is outside the scope of this document; however, this is defined as part of any overall metering solution. Such interfaces for retrieving data from a meter may be defined using suitable protocols such as DLMS/COSEM as defined in the IEC 62056 series.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62052-11:2021/A11:2022(Amendment)
Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment
SIST EN IEC 62052-11:2021/A11:2022

This part of IEC 62052 specifies requirements and associated tests, with their appropriate conditions for type testing of AC and DC electricity meters. This document details functional, mechanical, electrical and marking requirements, test methods, and test conditions, including immunity to external influences covering electromagnetic and climatic environments.

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62056-3-1:2021(Main)
Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling
SIST EN IEC 62056-3-1:2021

IEC 62056-3-1:2021 is available as IEC 62056-3-1:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 62056-3-1:2021 describes two sets of profiles: the first set of profiles allows a bidirectional communication between a client and a server. This set of profiles is made of three profiles allowing local bus data exchange with stations either energized or not. For non-energized stations, the bus supplies energy for data exchange. Three different profiles are supported: • base profile: this three-layer profile provides remote communication services; NOTE 1 This first profile was published in IEC 61142:1993 and became known as the Euridis standard. • profile with DLMS: this profile allows using DLMS services as specified in IEC 61334 4 41; NOTE 2 This second profile was published in IEC 62056-31:1999. • profile with DLMS/COSEM: this profile allows using the DLMS/COSEM Application layer and the COSEM object model as specified in IEC 62056 5 3 and in IEC 62056 6 2 respectively. The three profiles use the same physical layer and they are fully compatible, meaning that devices implementing any of these profiles can be operated on the same bus. The transmission medium is twisted pair using carrier signalling and it is known as the Euridis Bus. The second set of profiles allows unidirectional communication between a given Energy Metering device and a Customer Energy Management System. This second set is made up of three profiles. Subclause 4.2.1 to Clause 8 included specify the bidirectional communication using twisted pair signalling and Clause 9 to 9.5 the unidirectional communication using twisted pair signalling. This second edition cancels and replaces the first edition of IEC 62056-3-1, issued in 2013, and constitutes a technical revision. The main technical changes with regard to the previous edition are as follows: • addition of a profile which makes use of the IEC 62056 DLMS/COSEM Application layer and COSEM object model; • review of the data link layer which is split into two parts: – a pure Data Link layer; – a "Support Manager" entity managing the communication media; • ability to negotiate the communication speed, bringing baud rate up to 9 600 bauds.

  • Standard
    129 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62053-22:2021/A11:2021(Amendment)
Electricity metering equipment - Particular requirements - Part 22: Static meters for AC active energy (classes 0,1S, 0,2S and 0,5S)
SIST EN IEC 62053-22:2021/A11:2021

This part of IEC 62053 applies only to transformer operated static watt-hour meters of accuracy classes 0,1S, 0,2S and 0,5S for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62053-23:2021/A11:2021(Amendment)
Electricity metering equipment - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)
SIST EN IEC 62053-23:2021/A11:2021

This part of IEC 62053 applies only to static var-hour meters of accuracy classes 2 and 3 for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz networks and it applies to their type tests only.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day