Electric motor-operated tools - Dust measurement procedure - Part 2-4: Particular requirements for sanders other than disk type

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected. This part of EN 50632 sets particular requirements for sanders other than disk type.

Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2 4: Besondere Anforderungen für Schleifer außer Tellerschleifer

Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2 4: Exigences particulières pour les ponceuses autres que du type à disque

Elektromotorna orodja - Postopek meritve prahu - 2-4. del: Posebne zahteve za brusilnike, razen diskovnih brusilnikov - Dopolnilo A1

General Information

Status
Not Published
Current Stage
4099 - Decision to launch vote
Due Date
06-Jul-2021
Completion Date
06-Jul-2021

RELATIONS

Buy Standard

Amendment
EN 50632-2-4:2016/oprA1:2021
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 50632-2-4:2016/oprA1:2021
01-maj-2021
Elektromotorna orodja - Postopek meritve prahu - 2-4. del: Posebne zahteve za
brusilnike, razen diskovnih brusilnikov - Dopolnilo A1

Electric motor-operated tools - Dust measurement procedure - Part 2-4: Particular

requirements for sanders other than disk type
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2 4: Besondere
Anforderungen für Schleifer außer Tellerschleifer
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2 4:
Exigences particulières pour les ponceuses autres que du type à disque
Ta slovenski standard je istoveten z: EN 50632-2-4:2016/prA1
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 Električna orodja Electric tools
SIST EN 50632-2-4:2016/oprA1:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50632-2-4:2016/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN 50632-2-4:2016/oprA1:2021
EUROPEAN STANDARD DRAFT
EN 50632-2-4:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
March 2021
ICS 25.140.20; 13.040.40
English Version
Electric motor-operated tools - Dust measurement procedure -
Part 2-4: Particular requirements for sanders other than disk type

Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -

poussière - Partie 2 4: Exigences particulières pour les Teil 2 4: Besondere Anforderungen für Schleifer außer

ponceuses autres que du type à disque Tellerschleifer

This draft amendment prA1, if approved, will modify the European Standard EN 50632-2-4:2016; it is submitted to CENELEC members for

enquiry.
Deadline for CENELEC: 2021-06-18.
It has been drawn up by CLC/TC 116.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which

stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).

A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to

the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to

provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and

shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Project: 72581 Ref. No. EN 50632-2-4:2016/prA1 E
---------------------- Page: 3 ----------------------
SIST EN 50632-2-4:2016/oprA1:2021
EN 50632-2-4:2016/prA1:2021 (E)
Contents Page

European foreword .................................................................................................................................... 3

1 Modification to the European foreword ...................................................................................... 4

2 Modification to 4.3, “Operating conditions” .............................................................................. 4

---------------------- Page: 4 ----------------------
SIST EN 50632-2-4:2016/oprA1:2021
EN 50632-2-4:2016/prA1:2021 (E)
European foreword

This document (EN 50632-2-4:2016/prA1:2021) has been prepared by CLC/TC 116 “Safety and environmental

aspects of motor-operated electric tools”.
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
docume
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.