EN IEC 61800-3:2023

Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools

IEC 61800-3:2022 specifies electromagnetic compatibility (EMC) requirements for adjustable speed power drive systems (PDSs) and machine tools (MTs). A PDS is an AC or DC motor drive including an electronic converter. Requirements are stated for AC and DC PDSs and MTs with input and/or output voltages (line-to-line voltage), up to 35 kV AC RMS. This document applies to equipment of all power ratings. As a product EMC standard, this document can be used for the assessment of PDS and MT. It can also be used for the assessment of complete drive modules (CDM) or basic drive modules (BDM). Traction applications and electric vehicles are excluded. Equipment which is defined as group 2 in CISPR 11:2015 is excluded. This document does not give requirements for the electrical machine which converts power between the electrical and mechanical forms within the PDS. Requirements for rotating electrical machines are covered by the IEC 60034 series. In this document, the term "motor" is used to describe the electrical machine, whether rotary or linear, and regardless of the direction of power flow. This document is applicable to BDMs, CDMs, PDSs and MTs with or without radio function. However, this document does not specify any radio transmission and reception requirements. This document defines the minimum requirements for emission and immunity in the frequency range from 0 Hz to 400 GHz. Tests are not required in frequency ranges where no requirements are specified. This fourth edition cancels and replaces the third edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
extension of the scope to machine tools with one or more embedded PDS;
extension of the frequency range for radiated immunity tests to 6 GHz;
general updates in the normative part and the informative annexes.

Drehzahlveränderbare elektrische Antriebssysteme - Teil 3: EMV-Anforderungen einschließlich spezieller Prüfverfahren für Antriebssysteme und Werkzeugmaschinen mit darin enthaltenen Antriebssystemen

Entraînements électriques de puissance à vitesse variable - Partie 3: Exigences de CEM et méthodes d’essai spécifiques pour les PDS et machines-outils

L’IEC 61800-3:2022 spécifie les exigences de compatibilité électromagnétique (CEM) applicables aux entraînements électriques de puissance (PDS) et aux machines-outils (MT) à vitesse variable. Un PDS est un entraînement à moteur à courant alternatif ou continu, comprenant un convertisseur électronique. Les exigences sont spécifiées pour des PDS et MT en courant alternatif et en courant continu, ayant des tensions d’entrée et/ou de sortie (tensions entre phases), d’une valeur efficace allant jusqu’à 35 kV en courant alternatif. Le présent document s’applique aux équipements sans distinction sur leur valeur assignée de puissance. En tant que norme de produit CEM, le présent document peut être utilisé pour l’évaluation des PDS et des MT. Il peut aussi être utilisé pour l’évaluation des modules d’entraînement complet (CDM) ou des modules d’entraînement principal (BDM). Les applications de traction et les véhicules électriques sont exclus du domaine d’application. Le matériel défini comme relevant du groupe 2, conformément à la CISPR 11:2015, est exclu. Le présent document ne donne pas les exigences relatives à la machine électrique qui convertit la puissance électrique en puissance mécanique, au sein du PDS. Les exigences relatives aux machines électriques tournantes sont couvertes par la série IEC 60034. Dans le présent document, le terme "moteur" est utilisé pour décrire la machine électrique, qu’elle soit tournante ou linéaire, et quel que soit le sens de circulation de la puissance. Le présent document s’applique aux BDM, CDM, PDS et MT, avec ou sans fonctionnalité radioélectrique. Cependant, le présent document ne spécifie aucune exigence relative aux émissions et réceptions radioélectriques. Le présent document définit les exigences minimales relatives aux émissions et à l’immunité, dans la plage de fréquences allant de 0 Hz à 400 GHz. Les essais ne sont pas exigés dans les plages de fréquences pour lesquelles aucune exigence n’est spécifiée. Cette quatrième édition annule et remplace la troisième édition parue en 2017. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
extension du domaine d’application aux machines-outils équipées d’un ou plusieurs PDS intégrés;
extension de la plage de fréquences à 6 GHz pour les essais d’immunités aux perturbations rayonnées;
mises à jour génériques de la partie normative et des annexes informatives.

Električni pogonski sistemi z nastavljivo hitrostjo - 3. del: Zahteve za elektromagnetno združljivost in posebne preskusne metode za PDS in strojna orodja (IEC 61800-3:2022)

Standard IEC 61800-3:2022 določa zahteve elektromagnetne združljivosti za električne pogonske sisteme z nastavljivo hitrostjo (PDS) in strojna orodja (MT). Električni pogonski sistem z nastavljivo hitrostjo je motorni pogon na izmenični ali enosmerni tok, vključno z elektronskim pretvornikom. Zahteve so navedene za električne pogonske sisteme z nastavljivo hitrostjo na izmenični ali enosmerni tok in strojna orodja z vhodnimi in/ali izhodnimi (medlinijskimi) napetostmi pretvornika do 35 kV efektivne vrednosti izmenične napetosti. Ta dokument se ne uporablja za opremo vseh nazivnih moči.
Kot standard za elektromagnetno združljivost proizvoda je mogoče ta dokument uporabljati za ocenjevanje električnih pogonskih sistemov z nastavljivo hitrostjo in strojnega orodja. Prav tako ga je mogoče uporabljati za ocenjevanje celovitih pogonskih modulov (CDM) ali osnovnih pogonskih modulov (BDM).
Uporaba za namene vleke in električna vozila ni vključena v področje uporabe. Oprema, opredeljena kot skupina 2 v CISPR 11:2015 ni vključena.
Ta dokument ne podaja zahtev za električni stroj, ki pretvarja moč iz električne v mehansko in obratno znotraj električnega pogonskega sistema z nastavljivo hitrostjo. Zahteve za električne rotacijske stroje so opisane v skupini standardov IEC 60034. V tem dokumentu izraz »motor« opisuje tako rotacijski kot linearni električni stroj, ne glede na smer pretoka moči.
Ta dokument se uporablja za osnovne pogonske module, celovite pogonske module, električne pogonske sisteme z nastavljivo hitrostjo in strojno orodje z radijsko funkcijo ali brez nje. Vendar pa ta dokument ne določa zahtev v zvezi z radijskim oddajanjem in sprejemanjem.
Ta dokument določa minimalne zahteve za sevanja in odpornosti v frekvenčnem razponu od 0 Hz do 400 GHz. Kjer zahteve niso določene, ni treba opraviti preskusov v frekvenčnem razponu.
Četrta izdaja razveljavlja in nadomešča tretjo izdajo, objavljeno leta 2017. Ta izdaja je tehnično popravljena izdaja. Ta izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
> razširitev področja uporabe na strojna orodja z enim ali več vgrajenimi električnimi pogonskimi sistemi z nastavljivo hitrostjo;
> razširitev frekvenčnega razpona za preskuse odpornosti proti sevanju na 6 GHz;
> splošne posodobitve v normativnem delu in informativnih dodatkih

General Information

• Status: Published
• Publication Date: 19-Oct-2023
• ICS: 29.200 - Rectifiers. Convertors. Stabilized power supply
• ICS: 33.100 - Electromagnetic compatibility (EMC)
• ICS: 33.100.01 - Electromagnetic compatibility in general
• Technical Committee: CLC/TC 22X - Power electronics
• Drafting Committee: IEC/SC 22G - IEC_SC_22G
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 20-Oct-2023
• Completion Date: 20-Oct-2023
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Mandate: M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
• Ref Project: SIST EN IEC 61800-3:2024 - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools (IEC 61800-3:2022)

Relations

• Replaces: EN IEC 61800-3:2018 - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
• Effective Date: 21-May-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2024
Električni pogonski sistemi z nastavljivo hitrostjo - 3. del: Zahteve za
elektromagnetno združljivost in posebne preskusne metode za PDS in strojna
orodja (IEC 61800-3:2022)
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific
test methods for PDS and machine tools (IEC 61800-3:2022)
Drehzahlveränderbare elektrische Antriebssysteme – Teil 3: EMV-Anforderungen
einschließlich spezieller Prüfverfahren für Antriebssysteme und Werkzeugmaschinen mit
darin enthaltenen Antriebssystemen (IEC 61800-3:2022)
Entraînements électriques de puissance à vitesse variable - Partie 3: Exigences de CEM
et méthodes d’essai spécifiques pour les PDS et machines-outils (IEC 61800-3:2022)
Ta slovenski standard je istoveten z: EN IEC 61800-3:2023
ICS:
29.200 Usmerniki. Pretvorniki. Rectifiers. Convertors.
Stabilizirano električno Stabilized power supply
napajanje
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61800-3

NORME EUROPÉENNE
EUROPÄISCHE NORM October 2023
ICS 29.200; 33.100.01 Supersedes EN IEC 61800-3:2018
English Version
Adjustable speed electrical power drive systems - Part 3: EMC
requirements and specific test methods for PDS and machine
tools
(IEC 61800-3:2022)
Entraînements électriques de puissance à vitesse variable - Drehzahlveränderbare elektrische Antriebssysteme - Teil 3:
Partie 3: Exigences de CEM et méthodes d'essai EMV-Anforderungen einschließlich spezieller Prüfverfahren
spécifiques pour les PDS et machines-outils für Antriebssysteme und Werkzeugmaschinen mit darin
(IEC 61800-3:2022) enthaltenen Antriebssystemen
(IEC 61800-3:2022)
This European Standard was approved by CENELEC on 2023-08-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61800-3:2023 E

European foreword
The text of document 22G/461/FDIS, future edition 4 of IEC 61800-3, prepared by SC 22G "Adjustable
speed electric power drive systems (PDS)" of IEC/TC 22 "Power electronic systems and equipment"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-05-09
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-08-09
document have to be withdrawn
This document supersedes EN IEC 61800-3:2018 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61800-3:2022 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60038:2009 NOTE Approved as EN 60038:2011
IEC 60146-1-1:2009 NOTE Approved as EN 60146-1-1:2010 (not modified)
IEC 60146-2:1999 NOTE Approved as EN 60146-2:2000 (not modified)
IEC 60364-1:2005 NOTE Approved as HD 60364-1:2008 + A11:2017
IEC 61000-2-2:2002 NOTE Approved as EN 61000-2-2:2002 (not modified)
IEC 61000-2-2:2002/A1:2017 NOTE Approved as EN 61000-2-2:2002/A1:2017 (not modified)
IEC 61000-2-2:2002/A2:2018 NOTE Approved as EN 61000-2-2:2002/A2:2019 (not modified)
IEC 61000-2-12:2003 NOTE Approved as EN 61000-2-12:2003 (not modified)
IEC 61000-4-7:2002 NOTE Approved as EN 61000-4-7:2002 (not modified)
IEC 61000-4-8:2009 NOTE Approved as EN 61000-4-8:2010 (not modified)
IEC 61000-4-9:2016 NOTE Approved as EN 61000-4-9:2016 (not modified)
IEC 61000-4-10:2016 NOTE Approved as EN 61000-4-10:2017 (not modified)
IEC 61000-6-1:2016 NOTE Approved as EN IEC 61000-6-1:2019 (not modified)
IEC 61000-6-2:2016 NOTE Approved as EN IEC 61000-6-2:2019 (not modified)
IEC 61000-6-3:2020 NOTE Approved as EN IEC 61000-6-3:2021 (not modified)
IEC 61000-6-4:2018 NOTE Approved as EN IEC 61000-6-4:2019 (not modified)
IEC 61000-6-5:2015 NOTE Approved as EN 61000-6-5:2015 (not modified)
IEC 61000-6-8:2020 NOTE Approved as EN IEC 61000-6-8:2020 (not modified)
IEC 61140:2016 NOTE Approved as EN 61140:2016 (not modified)
IEC 61557-8:2014 NOTE Approved as EN 61557-8:2015 (not modified)
Approved as EN IEC 61400-21-1:2019 (not modified)
IEC 61400-21-1:2019 NOTE
+ A11:2020
IEC 61557-9:2014 NOTE Approved as EN 61557-9:2015 (not modified)
IEC 61800-1:2021 NOTE Approved as EN IEC 61800-1:2021 (not modified)
IEC 61800-2:2021 NOTE Approved as EN IEC 61800-2:2021 (not modified)
IEC 61800-5-1:2007 NOTE Approved as EN 61800-5-1:2007 (not modified) + A11:2021
IEC 61800-5-1:2007/A1:2016 NOTE Approved as EN 61800-5-1:2007/A1:2017 (not modified)
CISPR 14-1:2020 NOTE Approved as EN IEC 55014-1:2021 (not modified)
CISPR 16-2-1:2014 NOTE Approved as EN 55016-2-1:2014 (not modified)
CISPR 16-2-1:2014/A1:2017 NOTE Approved as EN 55016-2-1:2014/A1:2017 (not modified)
CISPR 16-2-3:2016 NOTE Approved as EN 55016-2-3:2017 (not modified)
CISPR 16-2-3:2016/A1:2019 NOTE Approved as EN 55016-2-3:2017/A1:2019 (not modified)
IEC 60146-1-1:2009 NOTE Approved as EN 60146-1-1:2010 (not modified)
1 2
CISPR 11:— NOTE Approved as EN 55011:—

Under preparation. Stage at the time of publication: CISPR/NFDIS 11:2022.
Under preparation. Stage at the time of publication: prEN 55011:2023.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61000-2-4 2002 Electromagnetic compatibility (EMC) - Part 2-4: EN 61000-2-4 2002
Environment - Compatibility levels in industrial
plants for low-frequency conducted
disturbances
IEC 61000-3-2 2018 Electromagnetic compatibility (EMC) - Part 3-2: EN IEC 61000-3-2 2019
Limits - Limits for harmonic current emissions
(equipment input current ≤ 16 A per phase)
+ A1 2020 + A1 2021
IEC 61000-3-3 2013 Electromagnetic compatibility (EMC) - Part 3-3: EN 61000-3-3 2013
Limits - Limitation of voltage changes, voltage
fluctuations and flicker in public low-voltage
supply systems, for equipment with rated
current ≤ 16 A per phase and not subject to
conditional connection
+ A1 2017 + A1 2019
+ A2 2021 + A2 2021
IEC 61000-3-11 2017 Electromagnetic compatibility (EMC) - Part 3- EN IEC 61000-3-11 2019
11: Limits - Limitation of voltage changes,
voltage fluctuations and flicker in public low-
voltage supply systems - Equipment with rated
current ≤ 75 A and subject to conditional
connection
IEC 61000-3-12 2011 Electromagnetic compatibility (EMC) - Part 3- EN 61000-3-12 2011
12: Limits - Limits for harmonic currents
produced by equipment connected to public
low-voltage systems with input current >16 A
and ≤ 75 A per phase
+ A1 2021 - -
IEC 61000-4-2 2008 Electromagnetic compatibility (EMC) - Part 4-2: EN 61000-4-2 2009
Testing and measurement techniques -
Electrostatic discharge immunity test
Publication Year Title EN/HD Year
IEC 61000-4-3 2020 Electromagnetic compatibility (EMC) - Part 4-3 EN IEC 61000-4-3 2020
: Testing and measurement techniques -
Radiated, radio-frequency, electromagnetic
field immunity test
IEC 61000-4-4 2012 Electromagnetic compatibility (EMC) - Part 4-4: EN 61000-4-4 2012
Testing and measurement techniques -
Electrical fast transient/burst immunity test
IEC 61000-4-5 2014 Electromagnetic compatibility (EMC) - Part 4-5: EN 61000-4-5 2014
Testing and measurement techniques - Surge
immunity test
+ A1 2017 + A1 2017
IEC 61000-4-6 2013 Electromagnetic compatibility (EMC) - Part 4-6: EN 61000-4-6 2014
Testing and measurement techniques -
Immunity to conducted disturbances, induced
by radio-frequency fields
IEC 61000-4-11 2020 Electromagnetic compatibility (EMC) - Part 4- EN IEC 61000-4-11 2020
11: Testing and measurement techniques -
Voltage dips, short interruptions and voltage
variations immunity tests for equipment with
input current up to 16 A per phase
IEC 61000-4-13 2002 Electromagnetic compatibility (EMC) - Part 4- EN 61000-4-13 2002
13: Testing and measurement techniques -
Harmonics and interharmonics including mains
signalling at a.c. power port, low frequency
immunity tests
+ A1 2009 + A1 2009
+ A2 2015 + A2 2016
IEC 61000-4-28 1999 Electromagnetic compatibility (EMC) - Part 4- EN 61000-4-28 2000
28: Testing and measurement techniques -
Variation of power frequency, immunity test
+ A1 2001 + A1 2004
+ A2 2009 + A2 2009
IEC 61000-4-34 2005 Electromagnetic compatibility (EMC) - Part 4- EN 61000-4-34 2007
34: Testing and measurement techniques -
Voltage dips, short interruptions and voltage
variations immunity tests for equipment with
input current more than 16 A per phase
+ A1 2009 + A1 2009
CISPR 11 (mod) 2015 Industrial, scientific and medical equipment - EN 55011 2016
Radio-frequency disturbance characteristics -
Limits and methods of measurement
+ A1 2016 + A1 2017
- - + A11 2020
+ A2 2019 + A2 2021
Publication Year Title EN/HD Year
CISPR 16-1-2 2014 Specification for radio disturbance and EN 55016-1-2 2014
immunity measuring apparatus and methods -
Part 1-2: Radio disturbance and immunity
measuring apparatus - Coupling devices for
conducted disturbance measurements
+ A1 2017 + A1 2018
CISPR 16-1-4 2019 Specification for radio disturbance and EN IEC 55016-1-4 2019
immunity measuring apparatus and methods -
Part 1-4: Radio disturbance and immunity
measuring apparatus - Antennas and test sites
for radiated disturbance measurements
+ A1 2020 + A1 2020
CISPR 32 2015 Electromagnetic compatibility of multimedia EN 55032 2015
equipment - Emission requirements
+ A1 2019 + A1 2020
- - + A11 2020
IEC 61800-3 ®
Edition 4.0 2022-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Adjustable speed electrical power drive systems –

Part 3: EMC requirements and specific test methods for PDS and machine tools

Entraînements électriques de puissance à vitesse variable –

Partie 3: Exigences de CEM et méthodes d’essai spécifiques pour les PDS et

machines-outils
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.200; 33.100.01 ISBN 978-2-8322-6059-3

– 2 – IEC 61800-3:2022 © IEC 2022
CONTENTS
FOREWORD . 7
1 Scope . 9
2 Normative references . 10
3 Terms and definitions . 11
3.1 Content of the power drive system (PDS) and its installation . 12
3.2 Content of the machine tool (MT) and its installation . 13
3.3 Locations and equipment categ
...