EN IEC 60384-16:2019
(Main)Fixed capacitors for use in electronic equipment - Part 16: Sectional specification - Fixed metallized polypropylene film dielectric DC capacitors
Fixed capacitors for use in electronic equipment - Part 16: Sectional specification - Fixed metallized polypropylene film dielectric DC capacitors
IEC 60384-16:2019 applies to fixed capacitors with metallized electrodes and polypropylene dielectric for use in electronic equipment. These capacitors can have "self-healing properties" depending on conditions of use. They are mainly intended for use with direct voltage. Capacitors for alternating voltage and pulse applications are not included, but are covered by IEC 60384-17. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384-14. Capacitors for electrical shock hazard protection (covered by IEC 60065) and fluorescent lamp and motor capacitors are also excluded.
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 16: Rahmenspezifikation - Festkondensatoren mit metallisierter Polypropylen-Folie als Dielektrikum für Gleichspannung
Condensateurs fixes utilisés dans les équipements électroniques - Partie 16: Spécification intermédiaire - Condensateurs fixes our courant continu à diélectrique en film de polypropylène métallisé
L'IEC 60384-16:2019 s'applique aux condensateurs fixes à électrodes métallisées et à diélectrique en polypropylène destinés aux équipements électroniques. Ces condensateurs peuvent avoir des propriétés "autocicatrisantes" en fonction des conditions d'utilisation. Ils sont principalement destinés à être utilisés dans des applications en tension continue. Les condensateurs destinés à des applications en tension alternative et en impulsions ne sont pas inclus, mais ils sont couverts par l'IEC 60384-17. Les condensateurs d'antiparasitage ne sont pas inclus, mais ils sont couverts par l'IEC 60384-14. Les condensateurs de protection contre les chocs électriques (couverts par l'IEC 60065), ainsi que les condensateurs pour moteurs et pour lampes fluorescentes sont également exclus.
Nespremenljivi kondenzatorji za uporabo v elektronski opremi - 16. del: Področna specifikacija - Nespremenljivi kondenzatorji z dielektrikom iz metalizirane polipropilenske folije za enosmerne napetosti (IEC 60384-16:2019)
Ta del standarda se uporablja za nespremenljive kondenzatorje z metaliziranimi elektrodami in polipropilenskim dielektrikom za uporabo v elektronski opremi. Ti kondenzatorji imajo lahko »samoozdravljive lastnosti«, odvisno od pogojev uporabe. Večinoma so namenjeni uporabi z enosmerno napetostjo. Največja moč, ki se jo uporabi, je 500 var pri 50 Hz in največja temenska napetost je 2500 V. Zajeta sta naslednja dva razreda, in sicer a) razred 1 za dolgotrajno uporabo in b) razred 2 za splošno uporabo. Kondenzatorji za izmenično napetost in impulzno uporabo niso vključeni, vendar so zajeti v standardu IEC 60384-17. Kondenzatorji za preprečevanje elektromagnetnih motenj niso vključeni, vendar so zajeti v standardu IEC 60384-14. Izključeni so tudi kondenzatorji za zaščito pred električnim udarom (zajeti v standardu IEC 60065) ter kondenzatorji v fluorescenčnih sijalkah in motorjih.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2020
Nadomešča:
SIST EN 60384-16:2006
Nespremenljivi kondenzatorji za uporabo v elektronski opremi - 16. del: Področna
specifikacija - Nespremenljivi kondenzatorji z dielektrikom iz metalizirane
polipropilenske folije za enosmerne napetosti (IEC 60384-16:2019)
Fixed capacitors for use in electronic equipment - Part 16: Sectional specification - Fixed
metallized polypropylene film dielectric DC capacitors (IEC 60384-16:2019)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 16:
Rahmenspezifikation: Festkondensatoren mit metallisierter Polypropylen-Folie als
Dielektrikum für Gleichspannung (IEC 60384-16:2019)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 16:
Spécification intermédiaire - Condensateurs fixes our courant continu à diélectrique en
film de polypropylène métallisé (IEC 60384-16:2019)
Ta slovenski standard je istoveten z: EN IEC 60384-16:2019
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60384-16
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2019
ICS 31.060.30 Supersedes EN 60384-16:2005 and all of its
amendments and corrigenda (if any)
English Version
Fixed capacitors for use in electronic equipment - Part 16:
Sectional specification - Fixed metallized polypropylene film
dielectric DC capacitors
(IEC 60384-16:2019)
Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der
électroniques - Partie 16: Spécification intermédiaire - Elektronik - Teil 16: Rahmenspezifikation:
Condensateurs fixes our courant continu à diélectrique en Festkondensatoren mit metallisierter Polypropylen-Folie als
film de polypropylène métallisé Dielektrikum für Gleichspannung
(IEC 60384-16:2019) (IEC 60384-16:2019)
This European Standard was approved by CENELEC on 2019-10-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60384-16:2019 E
European foreword
The text of document 40/2686/FDIS, future edition 3 of IEC 60384-16, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 60384-16:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-07-21
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-10-21
document have to be withdrawn
This document supersedes EN 60384-16:2005 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60384-16:2019 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60065 NOTE Harmonized as EN 60065
IEC 60068-2-20:2008 NOTE Harmonized as EN 60068-2-20:2008 (not modified)
IEC 60384-14 NOTE Harmonized as EN 60384-14
IEC 60384-17 NOTE Harmonized as EN IEC 60384-17
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60063 - Preferred number series for resistors and capacitors EN 60063 -
IEC 60068-1 2013 Environmental testing - Part 1: General and EN 60068-1 2014
guidance
IEC 60384-1 2016 Fixed capacitors for use in electronic equipment - EN 60384-1 2016
Part 1: Generic specification
IEC 61193-2 2007 Quality assessment systems - Part 2: Selection and EN 61193-2 2007
use of sampling plans for inspection of electronic
components and packages
IEC 60417 - Graphical symbols for use on equipment. Index, - -
survey and compilation of the single sheets.
ISO 3 - Preferred numbers - Series of preferred numbers - -
IEC 60384-16 ®
Edition 3.0 2019-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –
Part 16: Sectional specification – Fixed metallized polypropylene film dielectric
DC capacitors
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 16: Spécification intermédiaire – Condensateurs fixes pour courant
continu à diélectrique en film de polypropylène métallisé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.30 ISBN 978-2-8322-7334-0
– 2 – IEC 60384-16:2019 © IEC 2019
CONTENTS
FOREWORD . 6
1 General . 8
1.1 Scope . 8
1.2 Object . 8
1.3 Normative references . 8
1.4 Information to be given in a detail specification . 9
1.4.1 General . 9
1.4.2 Outline drawing and dimensions . 9
1.4.3 Mounting . 9
1.4.4 Ratings and characteristics . 10
1.4.5 Marking . 10
1.5 Terms and definitions . 10
1.6 Marking . 11
1.6.1 General . 11
1.6.2 Information for marking . 11
1.6.3 Marking on capacitors . 11
1.6.4 Marking on packaging . 11
2 Preferred ratings and characteristics . 12
2.1 Preferred characteristics . 12
2.2 Preferred values of ratings . 12
2.2.1 Nominal capacitance (C ) . 12
N
2.2.2 Tolerances on nominal capacitance . 12
2.2.3 Nominal capacitance with associated tolerance values . 12
2.2.4 Rated voltage (U ) . 12
R
2.2.5 Category voltage (U ). 13
C
2.2.6 Rated temperature . 13
3 Quality assessment procedures . 13
3.1 Primary stage of manufacture . 13
3.2 Structurally similar components . 13
3.3 Certified records of released lots . 13
3.4 Qualification approval procedures . 13
3.4.1 General . 13
3.4.2 Qualification approval on the basis of the fixed sample size procedures . 13
3.5 Quality conformance inspection . 20
3.5.1 Formation of inspection lots . 20
3.5.2 Test schedule . 21
3.5.3 Delayed delivery . 21
3.5.4 Assessment levels . 21
4 Test and measurement procedures . 22
4.1 Visual examination and check of dimensions . 22
4.1.1 General . 22
4.1.2 Test conditions . 22
4.1.3 Requirements . 22
4.2 Electrical tests . 22
4.2.1 Voltage proof . 22
4.2.2 Capacitance . 23
4.2.3 Tangent of loss angle (tan δ) . 23
IEC 60384-16:2019 © IEC 2019 – 3 –
4.2.4 Insulation resistance . 24
4.2.5 Inductance (if required) . 26
4.2.6 Characteristics depending on temperature (if required) . 26
4.3 Robustness of terminations . 27
4.3.1 General . 27
4.3.2 Initial inspections . 27
4.3.3 Test method . 27
4.3.4 Final inspections . 27
4.4 Resistance to soldering heat . 27
4.4.1 General . 27
4.4.2 Preconditioning .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.