EN 62453-303-1:2009

Field device tool (FDT) interface specification - Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2

IEC 62453-303-1:2009(E) provides information for integrating the PROFIBUS protocol into the FDT interface specification (IEC 62453-2). This part of the IEC 62453 specifies communication and other services. This specification neither contains the FDT specification nor modifies it. Communication Profile 3/1 and Communication Profile 3/2 (commonly known as PROFIBUSTM1) defines communication profiles based on IEC 61158-2 Type 3, IEC 61158-3-3, IEC 61158-4-3, IEC 61158-5-3, and IEC 61158-6-3. The basic profiles CP 3/1 (PROFIBUS DP) and CP 3/2 (PROFIBUS PA) are defined in IEC 61784-1. This publication is to be read in conjunction with IEC 62453-2:2009.

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 303-1: Integration von Kommunikationsprofilen - Kommunikationsprofile (CP) 3/1 und 3/2 nach IEC 61784

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 303-1: Intégration des profils de communication - CEI 61784 CP 3/1 et CP 3/2

La CEI 62453-303-1:2009 donne des informations pour intégrer le protocole PROFIBUS dans la spécification d'interface FDT (CEI 62453-2). La présente partie de la CEI 62453 spécifie les services de communication et autres services.

Specifikacija vmesnika orodja procesne naprave - 303-1. del: Integracija komunikacijskih profilov - IEC 61784 CP 3/1 in CP 3/2 (IEC 62453-303-1:2009)

Komunikacijski profil 3/1 in komunikacijski profil 3/2 (splošno znana kot PROFIBUS™1) opredeljujeta komunikacijske profile na osnovi IEC 61158-2, tipa 3, IEC 61158-3-3, IEC 61158-4-3, IEC 61158-5-3 in IEC 61158-6-3. Osnovna profila CP 3/1 (PROFIBUS DP) in CP 3/2 (PROFIBUS PA) sta določena v IEC 61784-1. Ta del IEC 62453 podaja informacije za integriranje protokola PROFIBUS v specifikacijo vmesnika orodja procesne naprave(IEC 62453-2). Ta del IEC 62453 opredeljuje komunikacijo in druge storitve. Ta specifikacija ne vsebuje specifikacije orodja procesne naprave niti je ne spreminja.

General Information

• Status: Published
• Publication Date: 14-Oct-2009
• Withdrawal Date: 31-Jul-2012
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.05 - Multilayer applications
• ICS: 35.110 - Networking
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Parallel Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Oct-2009
• Completion Date: 15-Oct-2009
• Ref Project: SIST EN 62453-303-1:2010 - Field device tool interface specification -- Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2

Relations

• Amended By: EN IEC 62453-303-1:2009/A1:2018 - Field device tool (FDT) interface specification - Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2010
Specifikacija vmesnika orodja procesne naprave - 303-1. del: Integracija
komunikacijskih profilov - IEC 61784 CP 3/1 in CP 3/2 (IEC 62453-303-1:2009)
Field device tool interface specification -- Part 303-1: Communication profile integration -
IEC 61784 CP 3/1 and CP 3/2
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 303-1: Integration von
Kommunikationsprofilen - IEC 61784 Kommunikationsprofile (CP) 3/1 und 3/2
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 303-1:
Intégration des profils de communication - CEI 61784 CP 3/1 et CP 3/2
Ta slovenski standard je istoveten z: EN 62453-303-1:2009
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62453-303-1
NORME EUROPÉENNE
October 2009
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.05; 35.110

English version
Field device tool (FDT) interface specification -
Part 303-1: Communication profile integration -
IEC 61784 CP 3/1 and CP 3/2
(IEC 62453-303-1:2009)
Spécification des interfaces des outils Field Device Tool (FDT)-
des dispositifs de terrain (FDT) - Schnittstellenspezifikation -
Partie 303-1: Intégration des profils Teil 303-1: Integration
de communication - von Kommunikationsprofilen -
CEI 61784 CP 3/1 et CP 3/2 Kommunikationsprofile (CP)
(CEI 62453-303-1:2009) 3/1 und 3/2 nach IEC 61784
(IEC 62453-303-1:2009)
This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62453-303-1:2009 E

Foreword
The text of document 65E/127/FDIS, future edition 1 of IEC 62453-303-1, prepared by SC 65E, Devices and
integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-303-1 on
2009-08-01.
Each part of the EN 62453-3xy series is intended to be read in conjunction with EN 62453-2.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62453-303-1:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[5] IEC 61158-6 NOTE  Harmonized as EN 61158-6:2004 (not modified).
[7] IEC 61158-5 NOTE  Harmonized as EN 61158-5:2004 (not modified).
__________
- 3 - EN 62453-303-1:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61131-3 2003 Programmable controllers - EN 61131-3 2003
Part 3: Programming languages
IEC 61158 Series Industrial communication networks - EN 61158 Series
Fieldbus specifications
1) 2)
IEC 61158-2 – Industrial communication networks - EN 61158-2 2008
Fieldbus specifications -
Part 2: Physical layer specification and service
definition
1) 2)
IEC 61158-3-3 – Industrial communication networks - EN 61158-3-3 2008
Fieldbus specifications -
Part 3-3: Data-link layer service definition -
Type 3 elements
1) 2)
IEC 61158-4-3 – Industrial communication networks - EN 61158-4-3 2008
Fieldbus specifications -
Part 4-3: Data-link layer protocol specification -
Type 3 elements
1) 2)
IEC 61158-5-3 – Industrial communication networks - EN 61158-5-3 2008
Fieldbus specifications -
Part 5-3: Application layer service definition -
Type 3 elements
1) 2)
IEC 61158-6-3 – Industrial communication networks - EN 61158-6-3 2008
Fieldbus specifications -
Part 6-3: Application layer protocol specification
- Type 3 elements
1) 2)
IEC 61784-1 – Industrial communication networks - Profiles - EN 61784-1 2008
Part 1: Fieldbus profiles
IEC 62453-1 2009 Field device tool (FDT) interface specification - EN 62453-1 2009
Part 1: Overview and guidance
IEC 62453-2 2009 Field device tool (FDT) interface specification - EN 62453-2 2009
Part 2: Concepts and detailed description

1)
Undated reference.
2)
Valid edition at date of issue.

IEC 62453-303-1 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
Field device tool (FDT) interface specification –
Part 303-1: Communication profile integration – IEC 61784 CP 3/1 and CP 3/2

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XA
ICS 25.040.40; 35.100.05; 35.110 ISBN 2-8318-1050-1
– 2 – 62453-303-1 © IEC:2009(E)
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.8
2 Normative references .8
3 Terms, definitions, symbols, abbreviated terms and conventions .9
3.1 Terms and definitions .9
3.2 Symbols and abbreviated terms.9
3.3 Conventions .9
3.3.1 Data type names and references to data types .9
3.3.2 Vocabulary for requirements.9
3.3.3 Use of UML .9
4 Bus category .10
5 Access to instance and device data.10
5.1 Process Channel objects provided by DTM.10
5.2 DTM services to access instance and device data .10
6 Protocol specific behavior.10
6.1 PROFIBUS device model .10
6.2 Configuration and parameterization of PROFIBUS devices.11
6.2.1 General .11
6.2.2 Monolithic DTM for a modular PROFIBUS device .12
6.2.3 Modular DTM for a modular PROFIBUS device.12
6.3 Support for DPV0 configuration .13
6.4 PROFIBUS slaves operating without a cyclic PROFIBUS master .13
6.5 PROFIBUS-related information of a slave DTM .13
6.5.1 General .13
6.5.2 Bus Master Configuration Part (BMCP).14
7 Protocol specific usage of general data types .24
8 Protocol specific common data types.26
9 Network management data types.26
9.1 General .26
9.1.1 Configuration.26
9.1.2 Process Channel .27
9.1.3 Parameterization .27
9.2 Master-bus parameter set.28
9.3 Slave bus parameter set.28
9.4 Module and channel data .29
9.5 GSD information.32
9.5.1 General .32
9.5.2 GSD for gateway devices .32
10 Communication data types .33
10.1 General .33
10.2 Error information provided by Communication Channel .33
10.3 DPV0 communication .33
10.4 DPV1 communication .40
11 Channel parameter data types.43

62453-303-1 © IEC:2009(E) – 3 –
12 Device identification .46
12.1 General .46
12.2 Protocol specific handling of the data type STRING.46
12.3 Common device type identification data types .46
12.4 Topology scan data types.51
12.5 Scan identification data types.52
12.6 Device type identification data types – provided by DTM .54
12.7 Identification information in GUI .57
13 ProfiSafe .57
13.1 Motivation .57
13.2 General parameter handling .57
13.3 ProfiSafe individual device parameter .58
Bibliography.60

Figure 1 – Part 303-1 of the IEC 62453 series .7
Figure 2 – FDT PROFIBUS device model.11
Figure 3 – Example for IO data within datagrams.30
Figure 4 – F-Parameter and individual device parameter .
...