EN 61158-3-24:2014
(Main)Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type-24 elements
Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type-24 elements
IEC 61158-3-24:2014 defines the services provided to the Type 24 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model and systems management at the boundary between the data-link layer and systems management of the fieldbus reference model.
Industrielle Kommunikationsnetze - Feldbusse - Teil 3-24: Dienstfestlegungen des Data Link Layer (Sicherungsschicht) - Typ 24-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-24: Définition des services de la couche liaison de données - Éléments de type 24
L'IEC 61158-3-24:2014 définit les services fournis à la couche application de bus de terrain Type 24 au niveau de la frontière entre les couches application et liaison de données du modèle de référence de bus de terrain et à la gestion des systèmes au niveau de la frontière entre la couche liaison de données et la gestion des systèmes selon le modèle de référence de bus de terrain.
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-24. del: Specifikacija protokola na ravni podatkovnih povezav - Elementi tipa 24 (IEC 61158-3-24:2014)
1.1 Splošno
Ta del standarda IEC 61158 določa skupne elemente za osnovne časovno kritične sporočilne komunikacije med napravami v avtomatizacijskem okolju. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja.
Ta standard na abstrakten način določa na zunaj vidno opravilo, ki ga zagotavlja podatkovna povezovalna raven procesnih vodil tipa 24 v smislu
a) preprostih dejanj in dogodkov opravila;
b) medsebojnih povezav med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji;
c) parametrov, povezanih z vsakim preprostim dejanjem in dogodkom, ter obliko, ki jo prevzamejo.
Namen tega standarda je določiti opravila, ki se zagotavljajo za
– aplikacijsko raven procesnih vodil tipa 24 na meji med aplikacijo in podatkovno povezovalno ravnjo referenčnega modela procesnega vodila;
– upravljanje sistemov na meji med podatkovno povezovalno ravnjo in upravljanjem sistemov referenčnega modela procesnega vodila.
1.2 Specifikacije
Glavni cilj tega standarda je določiti značilnosti konceptualnih opravil nivoja podatkovnih povezav, primernih za časovno kritične komunikacije, ter tako dopolniti osnovni referenčni model OSI pri usmerjanju razvoja protokolov časovnih povezav za časovno kritične komunikacije. Drugotni cilj je zagotoviti načrte prehoda iz predhodno obstoječih industrijskih komunikacijskih protokolov.
Ta specifikacija se lahko uporablja kot podlaga za formalne programske vmesnike podatkovne povezave. Vseeno ne gre za formalni programski vmesnik, pri čemer mora vsak tak vmesnik obravnavati izvedbena vprašanja, ki jih ta specifikacija ne zajema, vključno z:
a) velikostmi in oktetnim naročanjem različnih večoktetnih parametrov opravil;
b) korelacijo parnih primitivov za zahtevo in potrjevanje ali navedbo in odziv.
1.3 Skladnost
Ta standard ne določa posameznih implementacij ali izdelkov ter ne omejuje implementacije entitet podatkovnih povezav v okviru sistemov za industrijsko avtomatizacijo.
Ta oprema ni skladna s standardom za specifikacijo protokola na ravni podatkovnih povezav. Skladnost se doseže prek implementacije ustreznega protokola podatkovnih povezav, ki izpolnjuje storitve ravni podatkovnih povezav tipa 24, ki je določen v tem standardu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2015
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-24. del:
Specifikacija protokola na ravni podatkovnih povezav - Elementi tipa 24 (IEC 61158
-3-24:2014)
Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer
service definition - Type-24 elements (IEC 61158-3-24:2014)
Industrielle Kommunikationsnetze - Feldbusse - Teil 3-24: Dienstfestlegungen des Data
Link Layer (Sicherungsschicht) - Typ 24-Elemente (IEC 61158-3-24:2014)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-24:
Définition des services de la couche liaison de données - Éléments de type 24 (CEI
61158-3-24:2014)
Ta slovenski standard je istoveten z: EN 61158-3-24:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61158-3-24
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 25.040.40; 35.100.20; 35.110
English Version
Industrial communication networks - Fieldbus specifications -
Part 3-24: Data-link layer service definition - Type-24 elements
(IEC 61158-3-24:2014)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 3-24:
bus de terrain - Partie 3-24: Définition des services de la Dienstfestlegungen des Data Link Layer
couche liaison de données - Éléments de type 24 (Sicherungsschicht) - Typ 24-Elemente
(CEI 61158-3-24:2014) (IEC 61158-3-24:2014)
This European Standard was approved by CENELEC on 2014-09-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61158-3-24:2014 E
Foreword
The text of document 65C/759/FDIS, future edition 1 of IEC 61158-3-24, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-3-24:2014.
The following dates are fixed:
(dop) 2015-06-17
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-09-17
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61158-3-24:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61158-1 NOTE Harmonized as EN 61158-1.
IEC 61784-1 NOTE Harmonized as EN 61784-1.
IEC 61784-2 NOTE Harmonized as EN 61784-2.
- 3 - EN 61158-3-24:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 7498-3 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
Naming and addressing
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI
services
ISO/IEC 19501 2005 Information technology - Open Distributed - -
Processing - Unified Modeling Language
(UML)
IEC 61158-3-24 ®
Edition 1.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Fieldbus specifications –
Part 3-24: Data-link layer service definition – Type-24 elements
Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 3-24: Définition des services de la couche liaison de données – Éléments
de type 24
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX W
ICS 25.040.40; 35.100.20; 35.110 ISBN 978-2-8322-1710-8
– 2 – IEC 61158-3-24:2014 © IEC 2014
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
1.1 General . 7
1.2 Specifications . 7
1.3 Conformance . 7
2 Normative references . 8
3 Terms, definitions, symbols, abbreviations and conventions . 8
3.1 Reference model terms and definitions . 8
3.2 Service convention terms and definitions . 9
3.3 Additional Type 24 data-link specific definitions . 9
3.4 Common symbols and abbreviations . 12
3.5 Additional type 24 symbols and abbreviations . 12
3.6 Common conventions . 13
3.7 Additional Type 24 conventions . 14
4 Data-link service and concepts . 14
4.1 Overview . 14
4.2 DLS-user services . 15
4.3 Overview of interactions . 16
4.4 Detailed specification of services and interactions . 18
5 DL-management service . 22
5.1 Overview . 22
5.2 Overview of interactions . 23
5.3 Detailed specification of services and interactions . 25
Bibliography . 37
Figure 1 – Sequence of primitive for set data and read data service . 17
Figure 2 – Sequence of primitive for send data with acknowledge service . 17
Figure 3 – Sequence of primitive for send data with no-acknowledge service . 18
Figure 4 – Sequence of primitives for event service . 18
Figure 5 – Sequence of primitives for Reset service . 24
Figure 6 – Sequence of primitives for Set/get value service . 24
Figure 7 – Sequence of primitives for Evaluate delay service . 24
Figure 8 – Sequence of primitives for Start communication service . 25
Figure 9 – Sequence of primitives for Event and Clear error status service . 25
Table 1 – The list of DLS service primitives and parameters . 16
Table 2 – Write data primitives and parameters . 18
Table 3 – Values of result for write data service . 19
Table 4 – Read data primitives and parameters . 19
Table 5 – Values of result for read data service . 19
Table 6 – SDA primitives and parameters . 20
Table 7 – Values of result for SDA service . 20
IEC 61158-3-24:2014 © IEC 2014 – 3 –
Table 8 – SDN primitives and parameters . 21
Table 9 – Values of result for SDN service . 21
Table 10 – Event primitives and parameters . 22
Table 11 – Values of Event_ID for event service . 22
Table 12 – The list of DLMS service primitives and parameters . 23
Table 13 – Set value primitive and parameters . 26
Table 14 – The list of parameter Var_ID of Set value request . 26
Table 15 – Data type and range of variables . 26
Table 16 – List of the values of variable Cyc_sel . 27
Table 17 – List of the values of variable Tunit . 28
Table 18 – Structure example of the each element of variable IO_Map . 28
Table 19 – Data type and range of the each element . 29
Table 20 – Values of result for Set value service . 29
Table 21 – Get value primitive and parameters . 29
Table 22 –The list of parameter Var_ID of Get value request . 30
Table 23 – Data type and range of variables . 30
Table 24 – Error factor assign . 31
Table 25 – Values of result for Get value service . 31
Table 26 – Evaluate delay primitive and parameters . 32
Table 27 – Values of res
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.