EN 50636-2-107:2015/A2:2020

Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers

This European Standard specifies safety requirements and their verification for the design and construction of robotic battery powered electrical rotary lawnmowers and their peripherals with the rated voltage of the battery being not more than 75 V d.c. charged by mains electrical and/or alternative energies, e.g. solar power.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-107: Besondere Anforderungen für batteriebetriebene Roboter-Rasenmäher

Appareils électrodomestiques et analogues - Partie 2-107: Exigences particulières relatives aux tondeuses à gazon électriques robotisées alimentées par batteries

Varnost gospodinjskih in podobnih električnih aparatov - 2-107. del: Posebne zahteve za baterijske robotsko vodene električne vrtne kosilnice - Dopolnilo A2

General Information

• Status: Published
• Publication Date: 09-Jan-2020
• Withdrawal Date: 26-Sep-2022
• ICS: 65.060.70 - Horticultural equipment
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 10-Jan-2020
• Due Date: 08-Mar-2021
• Completion Date: 10-Jan-2020
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 50636-2-107:2015/A2:2020 - Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers

Relations

• Amends: EN 50636-2-107:2015 - Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
• Effective Date: 19-Jun-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2020
Varnost gospodinjskih in podobnih električnih aparatov - 2-107. del: Posebne
zahteve za baterijske robotsko vodene električne vrtne kosilnice - Dopolnilo A2
Safety of household and similar appliances - Part 2-107: Particular requirements for
robotic battery powered electrical lawnmowers
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-107:
Besondere Anforderungen für batteriebetriebene Roboter-Rasenmäher
Appareils électrodomestiques et analogues - Partie 2-107: Exigences particulières
relatives aux tondeuses à gazon électriques robotisées alimentées par batteries
Ta slovenski standard je istoveten z: EN 50636-2-107:2015/A2:2020
ICS:
13.120 Varnost na domu Domestic safety
65.060.70 Vrtnarska oprema Horticultural equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 50636-2-107:2015/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2020
ICS 65.060.70
English Version
Safety of household and similar appliances - Part 2-107:
Particular requirements for robotic battery powered electrical
lawnmowers
Appareils électrodomestiques et analogues - Partie 2-107: Sicherheit elektrischer Geräte für den Hausgebrauch und
Exigences particulières relatives aux tondeuses à gazon ähnliche Zwecke - Teil 2-107: Besondere Anforderungen für
électriques robotisées alimentées par batteries batteriebetriebene Roboter-Rasenmäher
This amendment A2 modifies the European Standard EN 50636-2-107:2015; it was approved by CENELEC on 2019-09-27. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50636-2-107:2015/A2:2020 E

Contents Page
European foreword . 3
1 Modification to Clause 1, "Scope" . 4
2 Modification to Clause 2, "Normative references" . 4
3 Modification to 20.102.4.1, "Inadvertent foot access to the cutting means" . 4
4 Addition of Figures 108 and 109 . 5
5 Replacement of Annex ZZ . 9

European foreword
This document [EN 50636-2-107:2015/A2:2020] has been prepared by CLC/TC 116 “Safety of motor-
operated electric tools”.
The following dates are fixed:
• latest date by which this document has (dop) 2020-09-27
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2022-09-27
standards conflicting with this document
have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This amendment was developed to implement an extra test with a kneeling child foot test probe.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
1 Modification to Clause 1, "Scope"
Add the following to the existing Clause 1:
"This standard covers all significant hazards, hazardous situations or hazardous events relevant for tools
covered by this standard.
NOTE 101 Essential requirements not mentioned in Table ZZ.1 are deemed to be not applicable, because the corresponding
hazards are either not relevant for machines covered by this standard or do not require specific action by the designer.".
2 Modification to Clause 2, "Normative references"
Add the following normative reference:
"EN ISO 8295:2004, Plastics - Film and sheeting - Determination of the coefficients of friction
(ISO 8295:1995)".
3 Modification to 20.102.4.1, "Inadvertent foot access to the cutting means"
Replace the first four paragraphs with the following:
“20.102.4.1.1 General
Inadvertent access to the cutting means by the feet during operation shall be prevented, so far as
reasonably practicable by the cutting means enclosure.
Compliance is checked by the tests of 20.102.4.1.2, 20.102.4.1.3 and 20.102.4.1.4.
The tests are made with the cutting means in the most unfavourable cutting position. If the cutting
means path height is different at different cutting means speeds, the test is conducted so as to include
the extremes of cutting means height.”.
Replace the existing subclause 20.102.4.1.1 with the following:
"20.102.4.1.2 Adult foot probe test
The machine shall be placed on a hard, flat surface. The guards shall be in the normal operating position
on the cutting means enclosure and the machine support members in contact with the supporting
surface. Components of machines, such as wheels and frames, are where relevant considered as part of
the cutting means enclosure for the purpose of these tests. The tests are conducted under static
conditions.”
The foot probe of Figure 102 shall be inserted towards the cutting means around the machine’s external
enclosure. The base of the probe is held horizontally at any height and then inclined up to 15° forward or
backward from the horizontal (see Figure 102). The probe is applied around the entire machine as
described in Figure 102 until a horizontal force of 20 N maximum is reached, or until the machine’s
enclosure lifts or moves from the original position, or until contact is made with the cutting means path,
whichever occurs first.
The test probe shall not enter the path of the cutting means assembly."
Replace the existing subclause 20.102.4.1.2 with the following:
"20.102.4.1.3 Foot probe test for standing child
The machine shall be placed on a hard, flat surface. The guards shall be in the normal operating position
on the cutting means enclosure and the machine support members in contact with the supporting
surface. Components of machines, such as wheels and frames, are where relevant considered as part of
the cutting means enclosure for the purpose of these tests. The tests are conducted under static
conditions.
The foot probe of Figure 107 shall be inserted towards the cutting means around the machine’s external
enclosure. The base of the probe is held horizontally at any height and then inclined up to 15° forward or
backward from the horizontal (see Figure 102). The probe is applied around the entire machine as
described in Figure 102 until a horizontal force of 20 N maximum is reached, or until the machine’s
enclosure lifts or moves from the original position, or until contact is made with the cutting means path,
whichever occurs first.
The test probe shall not enter the path of the cutting means assembly."
...