EN IEC 62828-3:2018

Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters

IEC 62828-3:2018 establishes specific procedures for testing temperature transmitters used in measuring and control systems for industrial process and for machinery control systems. When the process measurement transmitter features the temperature transmitter separated from the sensing element, the standard applies only to the temperature transmitter without the sensing element. In the case of a device where the sensing element is fully integrated with the temperature transmitter, the standard applies to the complete device. For general test procedures, reference is made to IEC 62828-1, which is applicable to all types of industrial and process measurement transmitters (PMT). The sensing element itself as well as radiation thermometers are excluded from the scope of this document. The IEC 62828 series cancels and replaces the IEC 60770 series and proposes revisions for the IEC 61298 series. NOTE In industrial and process applications to indicate the process measurement transmitters, it is common also to use the terms “industrial transmitters”, or “process transmitters”.

Referenzbedingungen und Testmethoden für Industrie- und Prozessmessgrößenumformer - Teil 3: Spezielle Testmethoden für Temperaturmessumformer

Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 3: Procédures spécifiques pour les transmetteurs de température

IEC 62828-3:2018 établit les procédures spécifiques d'essais des transmetteurs de température utilisés dans les systèmes de mesure et de commande des processus industriels et des machines. Lorsque le transmetteur de mesure de processus possède un transmetteur de température séparé du capteur, la norme s'applique uniquement au transmetteur de température sans le capteur. Dans le cas d'un appareil dont le capteur est totalement intégré au transmetteur de température, la norme s'applique à l'ensemble de l'appareil. Pour les procédures d'essais générales, il est fait référence à l'IEC 62828-1, qui est applicable à tous les types de transmetteurs de mesure industrielle et de processus (PMT, abréviation dérivée de l'anglais "process measurement transmitters"). Le capteur lui-même et les thermomètres à rayonnement sont exclus du domaine d'application du présent document. La série IEC 62828 annule et remplace la série IEC 60770 et propose des révisions pour la série IEC 61298. NOTE Dans les applications industrielles et de processus, pour indiquer les transmetteurs de mesure de processus, les termes "transmetteurs industriels" ou "transmetteurs de processus" sont également fréquemment utilises.

Referenčni pogoji in postopki za preskušanje industrijskih in procesnih merilnih oddajnikov - 3. del: Posebni postopki za oddajnike temperature (IEC 62828-3:2018)

Ta del standarda IEC 62828 določa posebne postopke za preskušanje oddajnikov temperature, ki se uporabljajo v merilnih in kontrolnih sistemih za industrijske procese ter sistemih za upravljanje strojev.
Če je oddajnik temperature procesnega merilnega oddajnika ločen od elementa za zaznavanje (RTD, TC itd.), se ta standard uporablja samo za oddajnik temperature brez elementa za zaznavanje. V primeru naprave, pri kateri je element za zaznavanje povsem vgrajen v oddajnik temperature, se ta standard uporablja za celotno napravo.
Za splošne preskusne postopke je omenjen standard IEC 62828-1, ki se uporablja za vse vrste industrijskih in procesnih merilnih oddajnikov (PMT).
OPOMBA: V industrijskih in procesnih uporabah se za procesne merilne oddajnike običajno uporabljata tudi izraza »industrijski oddajniki« ali »procesni oddajniki«.
Element za zaznavanje (npr. RTD, TC itd.) in sevalni termometri ne spadajo na področje uporabe tega dokumenta.

General Information

• Status: Published
• Publication Date: 28-Jun-2018
• Withdrawal Date: 22-May-2021
• ICS: 17.200.20 - Temperature-measuring instruments
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65B - IEC_SC_65B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 29-Jun-2018
• Completion Date: 29-Jun-2018
• Ref Project: SIST EN IEC 62828-3:2018 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters (IEC 62828-3:2018)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62828-3:2018
01-oktober-2018
5HIHUHQþQLSRJRMLLQSRVWRSNL]DSUHVNXãDQMHLQGXVWULMVNLKLQSURFHVQLKPHULOQLK
RGGDMQLNRYGHO3RVHEQLSRVWRSNL]DRGGDMQLNHWHPSHUDWXUH,(&
Reference conditions and procedures for testing industrial and process measurement
transmitters - Part 3: Specific procedures for temperature transmitters (IEC 62828-
3:2018)
Referenzbedingungen und Testmethoden für Industrie- und
Prozessmessgrößenumformer - Teil 3: Spezielle Testmethoden für
Temperaturmessumformer (IEC 62828-3:2018)
Conditions de référence et procédures pour l'essai des transmetteurs de mesure
industrielle et de processus - Partie 3: Procédures spécifiques pour les transmetteurs de
température (IEC 62828-3:2018)
Ta slovenski standard je istoveten z: EN IEC 62828-3:2018
ICS:
17.200.20 Instrumenti za merjenje Temperature-measuring
temperature instruments
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 62828-3:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 62828-3:2018
SIST EN 62828-3:2018
EUROPEAN STANDARD EN IEC 62828-3

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2018
ICS 17.200.20; 25.040.40
English Version
Reference conditions and procedures for testing industrial and
process measurement transmitters - Part 3: Specific procedures
for temperature transmitters
(IEC 62828-3:2018)
Conditions de référence et procédures pour l'essai des Referenzbedingungen und Testmethoden für Industrie- und
transmetteurs de mesure industrielle et de processus - Prozessmessgrößenumformer - Teil 3: Spezielle
Partie 3: Procédures spécifiques pour les transmetteurs de Testmethoden für Temperaturmessumformer
température (IEC 62828-3:2018)
(IEC 62828-3:2018)
This European Standard was approved by CENELEC on 2018-05-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62828-3:2018 E

SIST EN 62828-3:2018
European foreword
The text of document 65B/1110A/FDIS, future edition 1 of IEC 62828-3, prepared by IEC/SC 65B
"Measurement and control devices, of IEC Technical Committee 65: Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62828-3:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2019-02-23
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-05-23
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62828-3:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60584-1:2013 NOTE Harmonized as EN 60584-1:2013 (not modified).
IEC 60584-3:2007 NOTE Harmonized as EN 60584-3:2008 (not modified).
IEC 60715 NOTE Harmonized as EN 60715.
IEC 60751:2008 NOTE Harmonized as EN 60751:2008 (not modified).
IEC 61152:1992 NOTE Harmonized as EN 61152:1994 (modified).
IEC 61515:2016 NOTE Harmonized as EN 61515:2016 (not modified).
IEC 61298 (series) NOTE Harmonized as EN 61298 (series).
IEC 61987-14:2016 NOTE Harmonized as EN 61987-14:2016 (not modified).
IEC 62460:2008 NOTE Harmonized as EN 62460:2008 (not modified).
SIST EN 62828-3:2018
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60584 series Thermocouples EN 60584 series
IEC 62828-1 2017 Reference conditions and procedures for EN IEC 62828-1 2018
testing industrial and process
measurement transmitters – Part 1:
General procedures for all types of
transmitters
SIST EN 62828-3:2018
SIST EN 62828-3:2018
IEC 62828-3 ®
Edition 1.0 2018-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Reference conditions and procedures for testing industrial and process

measurement transmitters –
Part 3: Specific procedures for temperature transmitters

Conditions de référence et procédures pour l'essai des transmetteurs de mesure

industrielle et de processus –

Partie 3: Procédures spécifiques pour les transmetteurs de température

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.200.20; 25.040.40 ISBN 978-2-8322-5586-5

SIST EN 62828-3:2018
– 2 – IEC 62828-3:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
3.1 Definitions regarding temperature . 7
4 General description of the device . 8
5 Reference test conditions . 8
6 Test procedures . 9
6.1 General . 9
6.2 Tests at standard and operating reference test conditions. 10
6.2.1 General . 10
6.2.2 Suitable methods for accuracy verification in acceptance and routine
tests . 11
7 Technical documentation . 12
7.1 General . 12
7.2 Total probable error . 12
Annex A (informative) Temperature PMT . 13
Bibliography . 14

Figure 1 – Schematic example of test set-up for temperature measurement transmitters . 9
Figure 2 – Examples of terminals connection for RTD and TC . 10
Figure 3 – Example of measured error plot . 11

Table 1 – Example of measured errors. 11

SIST EN 62828-3:2018
IEC 62828-3:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
REFERENCE CONDITIONS AND PROCEDURES FOR TESTING
INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS –

Part 3: Specific procedures for temperature transmitters

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62828-3 has been prepared by Subcommittee 65B: Measurement
and control devices, of IEC Technical Committee 65: Industrial-process measurement, control
and automation.
The IEC 62828 series cancels and replaces the IEC 60770 series and proposes revisions for
the IEC 61298 series.
In IEC 61298, all parts related to PMT’s will be deleted, leaving all the requirements regarding
all devices but PMT’s.
SIST EN 62828-3:2018
– 4 – IEC 62828-3:2018 © IEC 2018
The text of this International Standard is based on the following documents:
FDIS Report on voting
65B/1110A/FDIS 65B/1114/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the
...

SLOVENSKI STANDARD
01-oktober-2018
Referenčni pogoji in postopki za preskušanje industrijskih in procesnih merilnih
oddajnikov - 3. del: Posebni postopki za oddajnike temperature (IEC 62828-3:2018)
Reference conditions and procedures for testing industrial and process measurement
transmitters - Part 3: Specific procedures for temperature transmitters (IEC 62828-
3:2018)
Referenzbedingungen und Testmethoden für Industrie- und
Prozessmessgrößenumformer - Teil 3: Spezielle Testmethoden für
Temperaturmessumformer (IEC 62828-3:2018)
Conditions de référence et procédures pour l'essai des transmetteurs de mesure
industrielle et de processus - Partie 3: Procédures spécifiques pour les transmetteurs de
température (IEC 62828-3:2018)
Ta slovenski standard je istoveten z: EN IEC 62828-3:2018
ICS:
17.200.20 Instrumenti za merjenje Temperature-measuring
temperature instruments
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62828-3

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2018
ICS 17.200.20; 25.040.40
English Version
Reference conditions and procedures for testing industrial and
process measurement transmitters - Part 3: Specific procedures
for temperature transmitters
(IEC 62828-3:2018)
Conditions de référence et procédures pour l'essai des Referenzbedingungen und Testmethoden für Industrie- und
transmetteurs de mesure industrielle et de processus - Prozessmessgrößenumformer - Teil 3: Spezielle
Partie 3: Procédures spécifiques pour les transmetteurs de Testmethoden für Temperaturmessumformer
température (IEC 62828-3:2018)
(IEC 62828-3:2018)
This European Standard was approved by CENELEC on 2018-05-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62828-3:2018 E

European foreword
The text of document 65B/1110A/FDIS, future edition 1 of IEC 62828-3, prepared by IEC/SC 65B
"Measurement and control devices, of IEC Technical Committee 65: Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62828-3:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2019-02-23
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-05-23
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62828-3:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60584-1:2013 NOTE Harmonized as EN 60584-1:2013 (not modified).
IEC 60584-3:2007 NOTE Harmonized as EN 60584-3:2008 (not modified).
IEC 60715 NOTE Harmonized as EN 60715.
IEC 60751:2008 NOTE Harmonized as EN 60751:2008 (not modified).
IEC 61152:1992 NOTE Harmonized as EN 61152:1994 (modified).
IEC 61515:2016 NOTE Harmonized as EN 61515:2016 (not modified).
IEC 61298 (series) NOTE Harmonized as EN 61298 (series).
IEC 61987-14:2016 NOTE Harmonized as EN 61987-14:2016 (not modified).
IEC 62460:2008 NOTE Harmonized as EN 62460:2008 (not modified).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60584 series Thermocouples EN 60584 series
IEC 62828-1 2017 Reference conditions and procedures for EN IEC 62828-1 2018
testing industrial and process
measurement transmitters – Part 1:
General procedures for all types of
transmitters
IEC 62828-3 ®
Edition 1.0 2018-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Reference conditions and procedures for testing industrial and process

measurement transmitters –
Part 3: Specific procedures for temperature transmitters

Conditions de référence et procédures pour l'essai des transmetteurs de mesure

industrielle et de processus –

Partie 3: Procédures spécifiques pour les transmetteurs de température

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.200.20; 25.040.40 ISBN 978-2-8322-5586-5

– 2 – IEC 62828-3:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
3.1 Definitions regarding temperature . 7
4 General description of the device . 8
5 Reference test conditions . 8
6 Test procedures . 9
6.1 General . 9
6.2 Tests at standard and operating reference test conditions. 10
6.2.1 General . 10
6.2.2 Suitable methods for accuracy verification in acceptance and routine
tests . 11
7 Technical documentation . 12
7.1 General . 12
7.2 Total probable error . 12
Annex A (informative) Temperature PMT . 13
Bibliography . 14

Figure 1 – Schematic example of test set-up for temperature measurement transmitters . 9
Figure 2 – Examples of terminals connection for RTD and TC . 10
Figure 3 – Example of measured error plot . 11

Table 1 – Example of measured errors. 11

IEC 62828-3:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
REFERENCE CONDITIONS AND PROCEDURES FOR TESTING
INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS –

Part 3: Specific procedures for temperature transmitters

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62828-3 has been prepared by Subcommittee 65B: Measurement
and control devices, of IEC Technical Committee 65: Industrial-process measurement, control
and automation.
The IEC 62828 series cancels and replaces the IEC 60770 series and proposes revisions for
the IEC 61298 series.
In IEC 61298, all parts related to PMT’s will be deleted, leaving all the requirements regarding
all devices but PMT’s.
– 4 – IEC 62828-3:2018 © IEC 2018
The text of this International Standard is based on the following documents:
FDIS Report on voting
65B/1110A/FDIS 65B/1114/RVD
Full information on the voting for the approval of this International Standard can be found in
the report
...