EN 61375-3-2:2012

Electronic railway equipment - Train communication network (TCN) - Part 3-2: MVB (Multifunction Vehicle Bus) conformance testing

IEC 61375-3-2:2012 applies to all equipment and devices implemented according to IEC 61375-3-1, i.e. it covers the procedures to be applied to such equipment and devices when the conformance should be proven. The applicability of this standard to a TCN implementation allows for individual conformance checking of the implementation itself and is a pre-requisite for further interoperability checking between different TCN implementations.

Elektronische Betriebsmittel für Bahnen - Zug-Kommunikations-Netzwerk (TCN) - Teil 3-2: MVB (Multifunction-Vehicle-Bus) Konformitätsprüfung

Matériel électronique ferroviaire - Réseau embarqué de train (TCN) - Partie 3-2: Essais de conformité MVB (Bus de Véhicule Multifonctions)

La CEI 61375-3-2:2012 s'applique à tous les équipements et dispositifs mis en oeuvre conformément à la CEI 61375-3-1, c'est-à-dire qu'elle couvre les modes opératoires à appliquer à ces équipements et dispositifs dont il convient de démontrer la conformité. L'applicabilité de la présente norme à la mise en oeuvre d'un TCN permet de procéder à une vérification de conformité individuelle de la mise en oeuvre elle-même et constitue une condition préalable à un contrôle approfondi de l'interopérabilité des différentes mises en oeuvre du TCN.

Železniške elektronske naprave - Komunikacijsko omrežje vlaka - 3-2. del: MVB - Preskušanje ustreznosti večnamenskega podatkovnega vodila vozila (IEC 61375-3-2:2012)

Ta del standarda IEC 61375 velja za vso opremo in naprave, ki se uporabljajo v skladu s standardom IEC 61375-3-1, tj. zajema postopke, ki jih je treba uporabljati za tako opremo in naprave v primeru dokazovanja skladnosti. Uporaba tega standarda za izvedbo komunikacijskega omrežja vlaka (TCN) omogoča posamezno preverjanje skladnosti same izvedbe in je pogoj za nadaljnje preverjanje interoperabilnosti med različnimi izvedbami komunikacijskega omrežja vlaka.

General Information

• Status: Published
• Publication Date: 02-Aug-2012
• Withdrawal Date: 25-Jul-2015
• ICS: 45.060 - Railway rolling stock
• Technical Committee: CLC/TC 9X - Electrical and electronic applications for railways
• Drafting Committee: IEC/TC 9 - IEC_TC_9
• Parallel Committee: IEC/TC 9 - IEC_TC_9
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 03-Aug-2012
• Completion Date: 03-Aug-2012
• Directive: 2001/16/EC - Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Directive: 96/48/EC - Interoperability of the trans-European high-speed rail system
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Ref Project: SIST EN 61375-3-2:2012 - Electronic railway equipment - Train communication network - Part 3-2: MVB - Multipurpose Vehicle Bus conformance testing (IEC 61375-3-2:2012)

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2012
äHOH]QLãNHHOHNWURQVNHQDSUDYH.RPXQLNDFLMVNRRPUHåMHYODNDGHO09%
3UHVNXãDQMHXVWUH]QRVWLYHþQDPHQVNHJDSRGDWNRYQHJDYRGLODYR]LOD,(&

Electronic railway equipment - Train communication network - Part 3-2: MVB -
Multipurpose Vehicle Bus conformance testing (IEC 61375-3-2:2012)
Elektronische Betriebsmittel für Bahnen - Zug-Kommunikations-Netzwerk - Teil 3-2: MVB
(Multipurpose-Vehicle-Bus) Konformitätsprüfung (IEC 61375-3-2:2012)
Matériel électronique ferroviaire - Réseau embarqué de train (TCN) - Partie 3-2: Essais
de conformité MVB (Bus de véhicule multifonctions) (CEI 61375-3-2:2012)
Ta slovenski standard je istoveten z: EN 61375-3-2:2012
ICS:
45.020 Železniška tehnika na Railway engineering in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61375-3-2
NORME EUROPÉENNE
August 2012
EUROPÄISCHE NORM
ICS 45.060
English version
Electronic railway equipment -
Train communication network (TCN) -
Part 3-2: MVB (Multifunction Vehicle Bus) conformance testing
(IEC 61375-3-2:2012)
Matériel électronique ferroviaire -  Elektronische Betriebsmittel für Bahnen -
Réseau embarqué de train (TCN) - Zug-Kommunikations-Netzwerk -
Partie 3-2: Essais de conformité MVB Teil 3-2: MVB (Multipurpose-Vehicle-Bus)
(Bus de Véhicule Multifonctions) Konformitätsprüfung
(CEI 61375-3-2:2012) (IEC 61375-3-2:2012)

This European Standard was approved by CENELEC on 2012-07-26. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61375-3-2:2012 E
Foreword
The text of document 9/1645/FDIS, future edition 1 of IEC 61375-3-2, prepared by IEC/TC 9 "Electrical
equipment and systems for railways" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61375-3-2:2012.
The following dates are fixed:
(dop) 2013-04-26
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-07-26

standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 61375-3-2:2012 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 61375-3-2:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60063 1963 Preferred number series for resistors and - -
+ A1 1967 capacitors
+ A2 1977
IEC 60571 - Electronic equipment used on rail vehicles - -

IEC 60807 Series Rectangular connectors for frequencies below - -
3 MHz
IEC 61375-2-1 - Electronic railway equipment - Train EN 61375-2-1 -
communication network (TCN) -
Part 2-1: Wire Train Bus (WTB)

IEC 61375-2-2 - Electronic railway equipment - Train EN 61375-2-2 -
communication network (TCN) -
Part 2-2: Wire Train Bus conformance testing

IEC 61375-3-1 - Electronic railway equipment - Train EN 61375-3-1 -
communication network (TCN) -
Part 3-1: Multifunction Vehicle Bus (MVB)

ISO/IEC 8482 1993 Information technology - Telecommunications - -
and information exchange between systems -
Twisted pair multipoint interconnections

ISO/IEC 9646-1 1994 Information technology - Open Systems - -
Interconnection - Conformance testing
methodology and framework -
Part 1: General concepts
ISO/IEC 9646-7 1995 Information technology - Open Systems - -
Interconnection - Conformance testing
methodology and framework -
Part 7: Implementation Conformance
Statements
Annex ZZ
(informative)
Coverage of Essential Requirements of EU Directives

This European Standard has been prepared under a mandate given to CENELEC by the
European Commission and the European Free Trade Association and within its scope the
standard covers all relevant essential requirements as given in Annex III of the EU Directive
2008/57/EC.
Compliance with this standard provides one means of conformity with the specified essential
requirements of the Directive concerned.

WARNING: Other requirements and other EU Directives may be applicable to the products
falling within the scope of this standard.

IEC 61375-3-2 ®
Edition 1.0 2012-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Electronic railway equipment – Train communication network (TCN) –

Part 3-2: MVB (Multifunction Vehicle Bus) conformance testing

Matériel électronique ferroviaire – Réseau embarqué de train (TCN) –

Partie 3-2: Essais de conformité MVB (Bus de Véhicule Multifonctions)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XD
ICS 45.060 ISBN 978-2-88912-071-0

– 2 – 61375-3-2  IEC:2012
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 Conformance test: approach, requirements and boundaries . 9
4.1 Approach . 9
4.1.1 Requirements . 9
4.1.2 Requirements declaration statements for an IUT . 11
4.2 Boundaries . 12
4.2.1 General . 12
4.2.2 Basic interconnection tests . 13
4.2.3 Capability tests . 13
4.2.4 Behaviour tests. 14
4.2.5 Conformance resolution tests . 14
4.2.6 Interpretation of clauses/subclauses and statements . 15
4.2.7 Relation to interoperability . 17
4.2.8 Relation to performance test . 17
4.3 Conformance assessment process outline . 18
4.3.1 General . 18
4.3.2 Analysis of results, outcomes and verdicts . 18
5 Conformance test of an MVB device . 19
5.1 PICS . 19
5.1.1 Instructions for filling the PICS pro-forma . 19
5.1.2 PICS tables . 21
5.2 Test suites . 29
5.2.1 Basic interconnection tests . 29
5.2.2 Capability tests . 30
5.2.3 Behavioural tests . 31
5.2.4 Electrical short distance medium . 31
5.2.5 Electrical middle distance medium . 35
5.2.6 Slave device status test suites . 40
5.2.7 Process data test suites . 48
5.2.8 Slave message data capability test suite . 60
5.2.9 MVB repeater conformance tests . 77
6 Conformance test of RTP . 86
6.1 General . 86
6.2 Ports and Traffic_Store . 86
6.3 Dataset consistency . 86
6.3.1 Error handling . 87
6.3.2 Freshness supervision . 87
6.3.3 Synchronisation dataset . 87
6.3.4 Dataset polling . 87
6.3.5 Dataset, port and logical address . 87
6.3.6 Traffic_Store Identifier . 87

61375-3-2  IEC:2012 – 3 –
6.4 Port_Address . 88
6.5 Link_Process_Data_Interface primitives . 88
6.6 Messages services and protocols . 88
7 Conformance test of NM . 88
Annex A (normative) Test laboratory role and client role . 89
Annex B (informative) Test instrumentation and dedicated test beds . 96
Bibliography . 98

Figure 1 – Application of the waveshaper . 29
Figure 2 – ESD test layout . 31
Figure 3 – ESD terminator connector test .
...