EN 61158-4-17:2008

Industrial communication networks - Fieldbus specifications - Part 4-17: Data-link layer protocol specification - Type 17 elements

It provides basic time-critical messaging communications between devices in an automation environment. This protocol provides communication opportunities to all participating data-link entities in a cyclic asynchronous manner, sequentially to each of those data-link entities, and in a synchronous manner, either cyclically or acyclically, according to a pre-established schedule. The specified protocol also provides means of changing the set of participating data-link entities and of modifying the set of scheduled communications opportunities. When the set of scheduled communications opportunities is null, the distribution of communication opportunities to the participating data-link entities is completely asynchronous. It includes the following significant changes with respect to the previous edition deletion of the former Type 6 fieldbus, and the placeholder for a Type 5 fieldbus data-link layer, for lack of market relevance; addition of new types of fieldbuses; division of this part into multiple parts numbered.

Industrielle Kommunikationsnetze - Feldbusse - Teil 4-17: Protokollspezifikation des Data Link Layer (Sicherungsschicht) - Typ 17-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 4-17: Spécification des protocoles des couches de liaison de données - Eléments de type 17

La CEI 61158-4-17:2007 définit la couche de liaison de données qui assure les communications de messagerie de base en temps critique entre des dispositifs dans un environnement d'automation. Elle spécifie les procédures de transfert opportun des données et des informations de commande entre une entité utilisateur de liaison de données et une entité utilisateur homologue, mais aussi parmi les entités de liaison de données formant le fournisseur de service de liaison de données distribué. Cette première édition et ses parties associées de la sous-série CEI 61158-4 annulent et remplacent la CEI 61158-4:2003. Elle comporte les modifications suivantes: - suppression du précédent bus de terrain Type 6 et du "placeholder" (réceptacle) pour une couche de liaison de données de bus de terrain Type 5, en raison du manque de pertinence commerciale; - ajout de nouveaux types de bus de terrain; - division de la présente partie en plusieurs parties numérotées -4-1, -4-2, ..., -4-19. La présente version bilingue (2013-09) correspond à la version anglaise monolingue publiée en 2007-12.

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 4-17. del: Specifikacija protokola na nivoju podatkovnih povezav - Elementi tipa 17 (IEC 61158-4-17:2007)

General Information

• Status: Published
• Publication Date: 28-Feb-2008
• Withdrawal Date: 31-Jan-2011
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.20 - Data link layer
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Parallel Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 29-Feb-2008
• Completion Date: 29-Feb-2008
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61158-4-17:2008 - Industrial communication networks - Fieldbus specifications -- Part 4-17: Data-link layer protocol specification - Type 17 elements

Relations

• Replaces: EN 61158-4:2004 - Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2008
1DGRPHãþD
SIST EN 61158-4:2004
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 4-17. del:
Specifikacija protokola na nivoju podatkovnih povezav - Elementi tipa 17 (IEC
61158-4-17:2007)
Industrial communication networks - Fieldbus specifications -- Part 4-17: Data-link layer
protocol specification - Type 17 elements
Industrielle Kommunikationsnetze - Feldbusse - Teil 4-17: Protokollspezifikation des
Data Link Layer (Sicherungsschicht) - Typ 17-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 4-17:
Spécification des protocoles des couches de liaison de données - Eléments de type 17
Ta slovenski standard je istoveten z: EN 61158-4-17:2008
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61158-4-17
NORME EUROPÉENNE
February 2008
EUROPÄISCHE NORM
ICS 35.100.20; 25.040.40 Partially supersedes EN 61158-4:2004

English version
Industrial communication networks -
Fieldbus specifications -
Part 4-17: Data-link layer protocol specification -
Type 17 elements
(IEC 61158-4-17:2007)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 4-17: Spécification des protocoles Teil 4-17: Protokollspezifikation
des couches de liaison de données - des Data Link Layer (Sicherungsschicht) -
Eléments de type 17 Typ 17-Elemente
(CEI 61158-4-17:2007) (IEC 61158-4-17:2007)

This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-4-17:2008 E
Foreword
The text of document 65C/474/FDIS, future edition 1 of IEC 61158-4-17, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61158-4-17 on 2008-02-01.
This and the other parts of the EN 61158-4 series supersede EN 61158-4:2004.
With respect to EN 61158-4:2004 the following changes were made:
– deletion of Type 6 fieldbus, and the placeholder for a Type 5 fieldbus data-link layer, for lack of market
relevance;
– addition of new fieldbus types;
– partition into multiple parts numbered 4-1, 4-2, …, 4-19.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-02-01
NOTE  Use of some of the associated protocol types is restricted by their intellectual-property-right holders. In all cases, the
commitment to limited release of intellectual-property-rights made by the holders of those rights permits a particular data-link layer
protocol type to be used with physical layer and application layer protocols in type combinations as specified explicitly in the
EN 61784 series. Use of the various protocol types in other combinations may require permission from their respective
intellectual-property-right holders.
IEC and CENELEC draw attention to the fact that it is claimed that compliance with this standard may involve the use of patents as
follows, where the [xx] notation indicates the holder of the patent right:
Type 17 and possibly other types:
PCT Application No. PCT/JP2004/011537 [YEC] Communication control method
PCT Application No. PCT/JP2004/011538 [YEC] Communication control method
IEC and CENELEC take no position concerning the evidence, validity and scope of these patent rights.
The holders of these patent rights have assured IEC that they are willing to negotiate licences under reasonable and non-
discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holders of these
patent rights are registered with IEC. Information may be obtained from:
[YEC]: Yokogawa Electric Corporation
2-9-32 Nakacho, Musashino-shi, 180-8750 Tokyo,
Japan
Attention: Intellectual Property & Standardization Center
Attention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights other than those
identified above. IEC and CENELEC shall not be held responsible for identifying any or all such patent rights.
Annex ZA has been added by CENELEC.
__________
- 3 - EN 61158-4-17:2008
Endorsement notice
The text of the International Standard IEC 61158-4-17:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61158-5-17 NOTE  Harmonized as EN 61158-5-17:2008 (not modified).
IEC 61158-6-17 NOTE  Harmonized as EN 61158-6-17:2008 (not modified).
IEC 61784-2 NOTE  Harmonized as EN 61784-2:2008 (not modified).
__________
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 61158-3-17 - Industrial communication networks - EN 61158-3-17 2008
Fieldbus specifications -
Part 3-17: Data-link layer service definition -
Type 17 elements
ISO/IEC 7498 Series Information technology - Open Systems EN ISO/IEC 7498 Series
Interconnection - Basic Reference Model

1)
ISO/IEC 8802-3 - Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access
method and physical layer specifications -

1)
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services

1)
IEEE 802.3ab - Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements - Supplement to Carrier
Sense Multiple Access with Collision
Detection (CSMA/CD) access method and
physical layer specifications - Physical layer
parameters and specifications for 1000 Mb/s
operation over 4-pair of category 5 balanced
copper cabling, type 1000BASE-T

1)
IETF RFC 768 - User Datagram Protocol - -

1)
IETF RFC 791 - Internet Protocol - -

1)
IETF RFC 792 - Internet Control Message Protocol - -

1)
IETF RFC 826 - Ethernet Address Resolution Protocol - -

1)
IETF RFC 894 - Standard for the Transmission of IP - -
Datagrams over Ethernet Networks

1)
IETF RFC 1112 - Host Extensions for IP Multicasting - -

1)
Undated reference.
2)
Valid edition at date of issue.

- 5 - EN 61158-4-17:2008
Publication Year Title EN/HD Year
1)
IETF RFC 2236 - Internet Group Management Protocol - -

IEC 61158-4-17
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 4-17: Data-link layer protocol specification – Type 17 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
V
ICS 35.100.20; 25.040.40 ISBN 2-8318-9440-9

– 2 – 61158-4-17 © IEC:2007(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
1.1 General .7
1.2 Specifications.7
1.3 Procedures.7
1.4 Applicability.7
1.5 Conformance.8
2 Normative reference .8
3 Definitions .8
3.1 Terms and definitions .8
3.2 Abbreviations and symbols.11
3.3 Conventions .11
4 Overview of the DL-protocol .12
4.1 General .12
4.2 Characteristics of the protocol .12
4.3 Data-link layer architecture.12
4.4 Services provided by the DLL.14
4.5 Network sharing with other protocols .15
5 DLPDU-parameter structure and encoding.15
5.1 Overview .15
5.2 DLPDU common header format .16
5.3 DLPDU body format .17
6 Local parameters and resources.21
6.1 General .21
6.2 Parameters and resources related to network structure .22
6.3 Parameters and resources to support real-time data transfer.23
6.4 Parameters and resources to support the scheduling function .24
6.5 Parameters and resources to support the security function.25
7 DL-service elements of procedure .26
7.1 Unacknowledged unitdata transfer service (UUS) .26
7.2 Acknowledged unitdata transfer service (AUS) .26
7.3 Acknowledged sequence of unitdata transfer service (ASS) .26
7.4 Multipoint unitdata transfer service (MUS) .27
7.5 Multipoint sequence of unitdata transfer service (MSS) .27
8 DL-support protocol.28
8.1 Transmission scheduling .28
8.2 Redundancy .29
8.3 DLPDU authentication .31
Bibliography.
...