EN 61804-2:2007

Function blocks (FB) for process control - Part 2: Specification of FB concept

Is applicable to Function Blocks (FB) for process control and specifies the Electronic Device Description Language (EDDL), specifies FB by using the result of harmonization work as regards several elements. defines a subset of the requirements of EN 61804-1 (hereafter referred to as Part 1) only, while Part 1 describes requirements for a distributed system.

Funktionsbausteine für die Prozessautomation - Teil 2: Festlegung des Funktionsbausteinkonzepts

Blocs fonction pour les processus industriels - Partie 2: Spécification du concept de bloc fonction

Is applicable to Function Blocks (FB) for process control and specifies the Electronic Device Description Language (EDDL), specifies FB by using the result of harmonization work as regards several elements. defines a subset of the requirements of EN 61804-1 (hereafter referred to as Part 1) only, while Part 1 describes requirements for a distributed system.

Funkcijski bloki (FB) za nadzor procesov - 2. del: Specifikacije koncepta FB (IEC 61804-2:2006)

General Information

• Status: Withdrawn
• Publication Date: 04-Jun-2007
• Withdrawal Date: 30-Apr-2010
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Parallel Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-Feb-2021
• Completion Date: 14-Feb-2021
• Ref Project: SIST EN 61804-2:2007 - Function blocks (FB) for process control -- Part 2: Specification of FB concept

Relations

• Replaces: EN 61804-2:2004 - Function Blocks (FB) for process control - Part 2: Specification of FB concept and Electronic Device Description Language (EDDL)
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 61804-2:2018 - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 2: Specification of FB concept
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61804-2:2007
01-december-2007
Nadomešča:
SIST EN 61804-2:2004
Funkcijski bloki (FB) za nadzor procesov - 2. del: Specifikacije koncepta FB (IEC
61804-2:2006)
Function blocks (FB) for process control -- Part 2: Specification of FB concept
Funktionsbausteine für die Prozessautomation -- Teil 2: Festlegung des
Funktionsbausteinkonzepts
Blocs fonction pour les processus industriels -- Partie 2: Spécification du concept de bloc
fonction
Ta slovenski standard je istoveten z: EN 61804-2:2007
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.060 Jeziki, ki se uporabljajo v Languages used in
informacijski tehniki in information technology
tehnologiji
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 61804-2:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 61804-2:2007

---------------------- Page: 2 ----------------------
SIST EN 61804-2:2007


EUROPEAN STANDARD
EN 61804-2

NORME EUROPÉENNE
June 2007
EUROPÄISCHE NORM

ICS 25.040.40; 35.240.50 Partially supersedes EN 61804-2:2004


English version


Function blocks (FB) for process control -
Part 2: Specification of FB concept
(IEC 61804-2:2006)


Blocs fonction  Funktionsbausteine
pour les processus industriels - für die Prozessautomation -
Partie 2: Spécification du concept Teil 2: Festlegung
de bloc fonction des Funktionsbausteinkonzepts
(IEC 61804-2:2006)
(CEI 61804-2:2006)




This European Standard was approved by CENELEC on 2007-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61804-2:2007 E

---------------------- Page: 3 ----------------------
SIST EN 61804-2:2007
EN 61804-2:2007 - 2 -
Foreword
The text of the International Standard IEC 61804-2:2006, prepared by SC 65C, Industrial networks, of
IEC TC 65, Industrial-process measurement and control, was submitted to the formal vote and was
approved by CENELEC as EN 61804-2 on 2007-05-01 without any modification.
This European Standard, together with EN 61804-3:2007, supersedes EN 61804-2:2004.
EN 61804-2:2007 includes the following significant technical changes with respect to EN 61804-2:2004:
– transfer of the EDDL-specific clauses to EN 61804-3;
– the FB-specific subclauses 4.1 and 4.2 as well as Clauses 5, 6, 7 and 8 are unchanged.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-05-01
The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is
claimed that compliance with this document may involve the use of patents
U.S. Patent No. 5,333,114
U.S. Patent No. 5,485,400
U.S. Patent No. 5,825,664
U.S. Patent No. 5,909,368
U.S. Patent Pending No. 08/916,178
Australian Patent No. 638507
Canadian Patent No. 2,066,743
European Patent No. 0495001
Validated in:
UK – Patent No. 0495001
France – Patent No. 0495001
Germany – Patent No. 69032954.7
Netherlands – Patent No. 0495001
Japan Patent No. 3137643
The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured the IEC that he is willing to negotiate licenses under
reasonable and non-discriminatory terms and conditions
...

SLOVENSKI STANDARD
SIST EN 61804-2:2007
01-december-2007
1DGRPHãþD
SIST EN 61804-2:2004
Funkcijski bloki (FB) za nadzor procesov - 2. del: Specifikacije koncepta FB (IEC
61804-2:2006)
Function blocks (FB) for process control - Part 2: Specification of FB concept
Funktionsbausteine für die Prozessautomation - Teil 2: Festlegung des
Funktionsbausteinkonzepts
Blocs fonction pour les processus industriels - Partie 2: Spécification du concept de bloc
fonction
Ta slovenski standard je istoveten z: EN 61804-2:2007
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 61804-2:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61804-2

NORME EUROPÉENNE
June 2007
EUROPÄISCHE NORM

ICS 25.040.40; 35.240.50 Partially supersedes EN 61804-2:2004


English version


Function blocks (FB) for process control -
Part 2: Specification of FB concept
(IEC 61804-2:2006)


Blocs fonction  Funktionsbausteine
pour les processus industriels - für die Prozessautomation -
Partie 2: Spécification du concept Teil 2: Festlegung
de bloc fonction des Funktionsbausteinkonzepts
(IEC 61804-2:2006)
(CEI 61804-2:2006)




This European Standard was approved by CENELEC on 2007-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61804-2:2007 E

---------------------- Page: 2 ----------------------

EN 61804-2:2007 - 2 -
Foreword
The text of the International Standard IEC 61804-2:2006, prepared by SC 65C, Industrial networks, of
IEC TC 65, Industrial-process measurement and control, was submitted to the formal vote and was
approved by CENELEC as EN 61804-2 on 2007-05-01 without any modification.
This European Standard, together with EN 61804-3:2007, supersedes EN 61804-2:2004.
EN 61804-2:2007 includes the following significant technical changes with respect to EN 61804-2:2004:
– transfer of the EDDL-specific clauses to EN 61804-3;
– the FB-specific subclauses 4.1 and 4.2 as well as Clauses 5, 6, 7 and 8 are unchanged.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-05-01
The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is
claimed that compliance with this document may involve the use of patents
U.S. Patent No. 5,333,114
U.S. Patent No. 5,485,400
U.S. Patent No. 5,825,664
U.S. Patent No. 5,909,368
U.S. Patent Pending No. 08/916,178
Australian Patent No. 638507
Canadian Patent No. 2,066,743
European Patent No. 0495001
Validated in:
UK – Patent No. 0495001
France – Patent No. 0495001
Germany – Patent No. 69032954.7
Netherlands – Patent No. 0495001
Japan Patent No. 3137643
The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured the IEC that he is willing to negotiate licenses under
reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this
respect, the statement of the holder of this patent right is registered with IEC. Information may be
obtained from:
Fieldbus Foundation,
9390 Research Boulevard, Suite II-250,
Austin, Te
...