CLC/TR 62258-8:2008
(Main)Semiconductor die products - Part 8: EXPRESS model schema for data exchange
Semiconductor die products - Part 8: EXPRESS model schema for data exchange
IEC/TR 62258-8:2008(E), which is a technical report, has been developed to facilitate the production, supply and use of semiconductor die products, including wafers; singulated bare die; die and wafers with attached connection structures; minimally or partially encapsulated die and wafers. This Technical Report contains an EXPRESS model schema that describes the elements needed for data exchange and that will allow the implementation of the requirements of the IEC 62258-1, IEC 62258-5 and IEC 62258-6 standards, as well as providing an exchange structure that is complementary to those defined in IEC 62258-2. It is also complementary to and compatible with the questionnaire in IEC 62258-4.
Halbleiter-Chip-Erzeugnisse - Teil 8: EXPRESS-Modell-Schema für den Datenaustausch
Produits à puce de semiconducteur - Partie 8: Schéma du modèle EXPRESS pour l’échange de données
Izdelki s polprevodniškimi čipi - 8. del: Shema modela EXPRESS za izmenjavo podatkov (IEC/TR 62258-8:2008)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2008
,]GHONLVSROSUHYRGQLãNLPLþLSLGHO 6KHPDPRGHOD(;35(66]DL]PHQMDYR
SRGDWNRY ,(&75
Semiconductor die products -- Part 8: EXPRESS model schema for data exchange
Halbleiter-Chip-Erzeugnisse - Teil 8: EXPRESS-Modell-Schema für den Datenaustausch
Produits à puce de semiconducteur - Partie 8: Schéma du modèle EXPRESS pour
l’échange de données
Ta slovenski standard je istoveten z: CLC/TR 62258-8:2008
ICS:
31.080.99 Drugi polprevodniški elementi Other semiconductor devices
31.200 Integrirana vezja, Integrated circuits.
mikroelektronika Microelectronics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL REPORT
CLC/TR 62258-8
RAPPORT TECHNIQUE
August 2008
TECHNISCHER BERICHT
ICS 31.080.99
English version
Semiconductor die products -
Part 8: EXPRESS model schema for data exchange
(IEC/TR 62258-8:2008)
Produits à puce de semiconducteur - Halbleiter-Chip-Erzeugnisse -
Partie 8: Schéma du modèle EXPRESS Teil 8: EXPRESS-Modell-Schema
pour l’échange de données für den Datenaustausch
(CEI/TR 62258-8:2008) (IEC/TR 62258-8:2008)
This Technical Report was approved by CENELEC on 2008-06-01.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TR 62258-8:2008 E
Foreword
The text of document 47/1927/DTR, future edition 1 of IEC/TR 62258-8, prepared by IEC TC 47,
Semiconductor devices, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as CLC/TR 62258-8 on 2008-06-01.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the Technical Report IEC/TR 62258-8:2008 was approved by CENELEC as a Technical
Report without any modification.
__________
- 3 - CLC/TR 62258-8:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60050 Series International Electrotechnical Vocabulary - -
(IEV)
1) 2)
IEC 62258-1 - Semiconductor die products - EN 62258-1 2005
Part 1: Requirements for procurement and
use
1) 2)
IEC 62258-2 - Semiconductor die products - EN 62258-2 2005
Part 2: Exchange data formats
1) 2)
IEC/TR 62258-4 - Semiconductor die products - CLC/TR 62258-4 2007
Part 4: Questionnaire for die users and
suppliers
1) 2)
IEC 62258-5 - Semiconductor die products - EN 62258-5 2006
Part 5: Requirements for information
concerning electrical simulation
1) 2)
IEC 62258-6 - Semiconductor die products - EN 62258-6 2006
Part 6: Requirements for information
concerning thermal simulation
ISO 10303-11 2004 Industrial automation systems - -
and integration - Product data representation
and exchange -
Part 11: Description methods: The EXPRESS
language reference manual
ISO 10303-21 2002 Industrial automation systems - -
and integration - Product data representation
and exchange -
Part 21: Implementation methods: Clear text
encoding of the exchange structure
1)
Undated reference.
2)
Valid edition at date of issue.
IEC/TR 62258-8
Edition 1.0 2008-05
TECHNICAL
REPORT
Semiconductor die products –
Part 8: EXPRESS model schema for data exchange
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
U
ICS 31.080.99 ISBN 2-8318-9779-3
– 2 – TR 62258-8 © IEC:2008(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references.6
3 Terms and definitions .7
4 General .7
5 Data exchange .7
Annex A (normative) EXPRESS model schema .8
Annex B (informative) STEP physical file example .25
TR 62258-8 © IEC:2008(E) – 3–
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SEMICONDUCTOR DIE PRODUCTS –
Part 8: EXPRESS model schema for data exchange
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC 62258-8, which is a technical report, has been prepared by subcommittee 47:
Semiconductor devices.
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
47/1927/DTR 47/1952/RVC
Full information on the voting for the approval of this technical report can be found in the report
on voting indicated in the above table.
– 4 – TR 62258-8 © IEC:2008(E)
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 62258 series, under the general title Semiconductor die products,
can be found on the IEC website. Further parts may be added as required.
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
TR 62258-8 © IEC:2008(E) – 5–
INTRODUCTION
th
This technical report is based on the work carried out in the ESPRIT 4 Framework project
GOODDIE which resulted in the publication of the ES 59008 series of European specifications.
Organisations that helped prepare this document included the ESPRIT ENCAST project, the
Die Products Consortium, JEITA, JEDEC and ZVEI.
– 6 – TR 62258-8 © IEC:2008(E)
SEMICONDUCTOR DIE PRODUCTS –
Part 8: EXPRESS model schema for data exchange
1 Scope
This part of IEC 62258, which is a technical report, has been developed to facilitate the
production, supply and use of semiconductor die products, including
• wafers,
• singulated bare die,
• die and wafers with attached connection structures,
• minimally or partially encapsulated die and wafers.
This Technical Report contains an EXPRESS model schema that describes the elements
needed for data exchange and that will allow the implementation of the requirements of the
IEC 62258-1, IEC 62258-5 and IEC 62258-6 standards, as well as providing an exchange
structure that is complementary to those defined in IEC 62258-2. It is also complementary to
and compatible with the questionnaire in IEC 62258-4.
2 Normative references
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of
the referenced document (including any amendments) applies.
IEC 60050 (all parts), International Electrotechnical Vocabulary
IEC 62258-1, Semiconductor die products – Part 1: Requirements for procurement and use
IEC 62258-2, Semiconductor die products – Part 2: Exchange data formats
IEC/TR 62258-4, Semiconductor die products – Part 4: Questionnaire for die users and
suppliers
IEC 62258-5, Semiconductor die products – Part 5: Requirements for information concerning
electrical simulation
IEC 62258-6, Semiconductor die products – Part 6: Requirements for information concerning
thermal simulation
ISO 10303-11:2004, Industrial automation systems and integration – Product data
representation and exchange – Part 11: Description methods: The EXPRESS language
reference manual
ISO 10303-21:2002, Industrial automation systems and integration – Product data
representation and exchange – Part 21: Implementation methods: Clear text encoding of the
exchange structure
TR 62258-8 © IEC:2008(E) – 7–
3 Terms and definitions
For the purposes of this document, relevant terms, which are defined in IEC 60050 together
with additional terms and acronyms as given in IEC 62258-1 apply.
4 General
The EXPRESS model schema given in this Technical Report complies with ISO 10303-11 and
allows for exchange of data on die devices using the STEP Physical File format (SPF) as
defined in ISO 10303-21.
To comply with IEC 62258-1, that standard requires that suppliers of die devices shall furnish
information that is necessary and sufficient for users of die devices at all stages of design,
procurement, manufacture and test of products containing them. The EXPRESS model schema
at Annex A defines an exchange mechanism for structuring such information using a
representation that complies with the schema and as such is intended as an aid to compliance
with the standard.
Whilst it is expected that much of the information supplied will be in the public domain and
available from such sour
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.