EN 60811-501:2012/A1:2018

Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds

Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 501: Mechanische Prüfungen - Prüfungen zur Bestimmung der mechanischen Eigenschaften von Isolier- und Mantelwerkstoffen

Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 501: Essais mécaniques - Détermination des propriétés mécaniques des mélanges pour les enveloppes isolantes et les gaines

Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 501. del: Mehanski preskusi - Preskusi za ugotavljanje mehanskih lastnosti zmesi za izolacije in oplaščenja - Dopolnilo A1 (IEC 60811-501:2012/A1:2018)

General Information

• Status: Published
• Publication Date: 27-Sep-2018
• Withdrawal Date: 19-Jul-2021
• ICS: 29.035.01 - Insulating materials in general
• ICS: 29.060.20 - Cables
• Technical Committee: CLC/TC 20 - Electric cables
• Drafting Committee: IEC/TC 20 - IEC_TC_20
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 28-Sep-2018
• Completion Date: 28-Sep-2018
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60811-501:2012/A1:2018 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds (IEC 60811-501:2012/A1:2018)

Relations

• Amends: EN 60811-501:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2018
(OHNWULþQLLQRSWLþQLNDEOL3UHVNXãHYDOQHPHWRGH]DQHNRYLQVNHPDWHULDOH
GHO0HKDQVNLSUHVNXVL3UHVNXVL]DXJRWDYOMDQMHPHKDQVNLKODVWQRVWL]PHVL]D
L]RODFLMHLQRSODãþHQMD'RSROQLOR$,(&$
Electric and optical fibre cables - Test methods for non-metallic materials - Part 501:
Mechanical tests - Tests for determining the mechanical properties of insulating and
sheathing compounds (IEC 60811-501:2012/A1:2018)
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene
Werkstoffe - Teil 501: Mechanische Prüfungen - Prüfungen zur Bestimmung der
mechanischen Eigenschaften von Isolier- und Mantelwerkstoffen (IEC 60811-
501:2012/A1:2018)
Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-
métalliques - Partie 501: Essais mécaniques - Détermination des propriétés mécaniques
des mélanges pour les enveloppes isolantes et les gaines (IEC 60811-
501:2012/A1:2018)
Ta slovenski standard je istoveten z: EN 60811-501:2012/A1:2018
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
29.060.20 Kabli Cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60811-501:2012/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2018
ICS 29.035.01; 29.060.20
English Version
Electric and optical fibre cables - Test methods for non-metallic
materials - Part 501: Mechanical tests - Tests for determining the
mechanical properties of insulating and sheathing compounds
(IEC 60811-501:2012/A1:2018)
Câbles électriques et à fibres optiques - Méthodes d'essai Kabel, isolierte Leitungen und Glasfaserkabel -
pour les matériaux non-métalliques - Partie 501: Essais Prüfverfahren für nichtmetallene Werkstoffe - Teil 501:
mécaniques - Détermination des propriétés mécaniques Mechanische Prüfungen - Prüfungen zur Bestimmung der
des mélanges pour les enveloppes isolantes et les gaines mechanischen Eigenschaften von Isolier- und
(IEC 60811-501:2012/A1:2018) Mantelwerkstoffen
(IEC 60811-501:2012/A1:2018)
This amendment A1 modifies the European Standard EN 60811-501:2012; it was approved by CENELEC on 2018-07-20. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60811-501:2012/A1:2018 E

European foreword
The text of document 20/1795/FDIS, future IEC 60811-501/A1, prepared by IEC/TC 20
"Electric cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be im
...