Voltage sourced converter (VSC) valves for high-voltage direct curent (HVDC) power transmission - Electrical testing

IEC 62501:2009 applies to self-commutated converter valves, for use in a three-phase bridge voltage sourced converter (VSC) for high voltage d.c. power transmission or as part of a back-to-back link. It is restricted to electrical type and production tests.

Ventile von Spannungszwischenkreis-Stromrichtern (VSC) für die Hochspannungsgleichstromübertragung (HGÜ) - Elektrische Prüfung

Valves à convertisseur de source de tension (VSC) pour le transport d'énergie en courant continu à haute tension (CCHT) - Essais électriques

La CEI 62501:2009 s'applique aux valves à convertisseur autocommuté, conçues pour être utilisées dans un convertisseur de source de tension (VSC, valve sourced converter en anglais) en pont triphasé pour le transport d'énergie en courant continu à haute tension ou en tant qu'élément d'une liaison dos-à-dos. Elle se limite aux essais de type électrique et de production.

Električno preskušanje elektronk za pretvornike napetostnih virov (VSC) za enosmerni visokonapetostni prenos električne energije (HVDC) (IEC 62501:2009)

Ta mednarodni standard se uporablja za elektronke za pretvornike z lastno komutacijo za uporabo pri trifaznih pretvornikih napetostnih virov (VSC) za enosmerni visokonapetostni prenos električne energije ali kot del povezave zaporedne vrste. Omejen je na električno vrsto in proizvodne preskuse. Preskusi, določeni v tem standardu, temeljijo na zračno izoliranih elektronkah. Za druge vrste elektronk se je treba dogovoriti glede zahtev preskusa in meril sprejemljivosti.

General Information

Status
Published
Publication Date
13-Aug-2009
Withdrawal Date
30-Jun-2012
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
14-Aug-2009
Completion Date
14-Aug-2009

Relations

Buy Standard

Standard
EN 62501:2009
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62501:2009
01-oktober-2009
(OHNWULþQRSUHVNXãDQMHHOHNWURQN]DSUHWYRUQLNHQDSHWRVWQLKYLURY 96& ]D
HQRVPHUQLYLVRNRQDSHWRVWQLSUHQRVHOHNWULþQHHQHUJLMH +9'&  ,(&
Electrical testing of voltage sourced converter (VSC) valves for high-voltage direct
voltage (HVDC) power transmission (IEC 62501:2009)
Spannungsgeführte Stromrichterventile (VSC-Ventile) für die
Hochspannungsgleichstromübertragung (HGÜ) - Elektrische Prüfung (IEC 62501:2009)
Essais électriques sur les valves à convertisseur de source de tension (VSC) pour le
transport d'énergie en courant continu à haute tension (CCHT) EEIC 62501:2009)
Ta slovenski standard je istoveten z: EN 62501:2009
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
29.240.01 2PUHåMD]DSUHQRVLQ Power transmission and
GLVWULEXFLMRHOHNWULþQHHQHUJLMH distribution networks in
QDVSORãQR general
SIST EN 62501:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62501:2009

---------------------- Page: 2 ----------------------

SIST EN 62501:2009

EUROPEAN STANDARD
EN 62501

NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM

ICS 29.200; 29.240


English version


Voltage sourced converter (VSC) valves
for high-voltage direct current (HVDC) power transmission -
Electrical testing
(IEC 62501:2009)


Valves à convertisseur de source  Spannungsgeführte Stromrichterventile
de tension (VSC) pour le transport (VSC-Ventile) für die
d'énergie en courant continu Hochspannungsgleichstromübertragung
à haute tension (CCHT) - (HGÜ) -
Essais électriques Elektrische Prüfung
(CEI 62501:2009) (IEC 62501:2009)




This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62501:2009 E

---------------------- Page: 3 ----------------------

SIST EN 62501:2009
EN 62501:2009 - 2 -
Foreword
The text of document 22F/185/FDIS, future edition 1 of IEC 62501, prepared by SC 22F, Power
electronics for electrical transmission and distribution systems, of IEC TC 22, Power electronic systems
and equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 62501 on 2009-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2010-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2012-07-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62501:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60146-2 NOTE  Harmonized as EN 60146-2:2000 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 62501:2009
- 3 - EN 62501:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by c
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.