EN 50551-2:2013
(Main)Simplex and duplex cables to be used for cords - Part 2: Detailed specification and minimum requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords category U
Simplex and duplex cables to be used for cords - Part 2: Detailed specification and minimum requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords category U
This European Standard describes the minimum set of requirements that a simplex ruggedised single mode fibre cable shall meet in order to allow termination with a connector for use in category U (Uncontrolled Environment).
Simplex- und Duplex-Kabel, die in konfektionierten Leitungen benutzt werden - Teil 2: Bauartspezifikation und Mindestanforderungen für ein 3,0 mm-Simplex-Einmodenfaserkabel mit zusätzlichem Schutz für konfektionierte Kabel/Leitungen der Kategorie U
Câbles simplex et duplex destinés à être utilisés en tant que cordons - Partie 2: Spécifications particulières et exigences minimales relatives aux câbles à fibres optiques unimodales renforcés simplex de 3,0 mm pour usage en cordons / cordons de brassage, en Catégorie U
Simpleksni in dupleksni kabli za vrvice - 2. del: Podrobna specifikacija in minimalne zahteve za simpleksne robustne enorodne optične kable za povezovalne vrvice/vrvice kategorije U
Ta evropski standard opisuje minimalni sklop zahtev, ki jih mora izpolnjevati simpleksni robustni enorodni optični kabel, da se omogoči spoj s konektorjem za uporabo v kategoriji U (nenadzorovano okolje).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2014
6LPSOHNVQLLQGXSOHNVQLNDEOL]DYUYLFHGHO 3RGUREQDVSHFLILNDFLMDLQ
PLQLPDOQH]DKWHYH]DVLPSOHNVQHUREXVWQHHQRURGQHRSWLþQHNDEOH]D
SRYH]RYDOQHYUYLFHYUYLFHNDWHJRULMH8
Simplex and duplex cables to be used for cords - Part 2: Detailed Specification and
minimum requirements for simplex ruggedized single mode cables to be used for
patchcord/cords Category U
Simplex- und Duplexkabel für die Anwendung in konfektionierten Leitungen - Teil 2:
Bauartspezifikation und Mindestanforderungen für Simplex-Einmodenfaserkabel mit
zusätzlichem Schutz für die Kategorie U
Câbles simplex et duplex destinés à être utilisés en tant que cordons -- Partie 2:
Spécifications particulières et exigences minimales relatives aux câbles unimodaux
simplex renforcés pour usage en cordons / cordons de brassage, en Catégorie U
Ta slovenski standard je istoveten z: EN 50551-2:2013
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 50551-2
NORME EUROPÉENNE
October 2013
EUROPÄISCHE NORM
ICS 33.180.10
English version
Simplex and duplex cables to be used for cords -
Part 2: Detailed specification and minimum requirements for a 3,0 mm
simplex ruggedised single mode fibre cable to be used for
patchcords/cords category U
Câbles simplex et duplex destinés à être Simplex- und Duplex-Kabel, die in
utilisés en tant que cordons - konfektionierten Leitungen benutzt werden
Partie 2: Spécifications particulières et -
exigences minimales relatives aux câbles Teil 2: Bauartspezifikation und
à fibres optiques unimodales renforcés Mindestanforderungen für ein 3,0 mm-
simplex de 3,0 mm pour usage en Simplex-Einmodenfaserkabel mit
cordons / cordons de brassage, en zusätzlichem Schutz für konfektionierte
Catégorie U Kabel/Leitungen der Kategorie U
This European Standard was approved by CENELEC on 2013-08-19. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50551-2:2013 E
Contents Page
Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Cable description . 5
4 Optical fibres Single mode optical fibre . 7
5 Buffer . 7
6 Cable construction . 8
6.1 General . 8
6.2 Mechanical and environmental tests . 9
– 3 – EN 50551-2:2013
Foreword
This document (EN 50551-2:2013) has been prepared by CLC/TC 86A "Optical fibres and optical fibre cables".
The following dates are fixed:
(dop) 2014-08-19
• latest date by which this document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-08-19
• latest date by which the national
standards conflicting with this
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
EN 50551 is composed with the following parts:
• EN 50551-1, Simplex and duplex cables to be used for cords Part 1: Blank Detail Specification and
minimum requirements;
• EN 50551-2, Simplex and duplex cables to be used for cords Part 2: Detailed specification and minimum
requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords
category U.
This European Standard was jointly prepared by the Technical Committee CLC/TC 86A "Optical fibres and optical
fibre cables", and the Technical Committee CLC/TC 86BXA "Fibre optic interconnect, passive and connectorised
components".
__________
1 Scope
This European Standard describes the minimum set of requirements that a simplex ruggedised single mode fibre
cable shall meet in order to allow termination with a connector for use in category U (Uncontrolled Environment).
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable
for its application. For dated references, only the edition cited applies. For undated references, the latest edition of
the referenced document (including any amendments) applies.
EN 60793-1-20, Optical fibres Part 1-20: Measurement methods and test procedures Fibre geometry
(IEC 60793-1-20)
EN 60793-1-21, Optical fibres Part 1-21: Measurement methods and test procedures Coating geometry
(IEC 60793-1-21)
EN 60793-1-40, Optical fibres Part 1-40: Measurement methods and test procedures Attenuation
(IEC 60793-1-40)
EN 60793-1-44, Optical fibres Part 1-44: Measurement methods and test procedures Cut-off wavelength
(IEC 60793-1-44)
EN 60793-1-45, Opti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.