EN 62911:2016
(Main)Audio, video and information technology equipment - Routine electrical safety testing in production
Audio, video and information technology equipment - Routine electrical safety testing in production
IEC 62911:2016 defines routine electrical safety test procedures for use during or after manufacturing of complete equipment, sub-assemblies or components, complying with IEC 60065, IEC 60950-1 or IEC 62368-1 and powered by an a.c. mains supply or d.c. mains supply, to detect manufacturing failures and unacceptable tolerances in manufacturing and materials. All the tests defined in this standard do not necessarily have to be performed at the end product manufacturing location. The optimal location for the routine electrical safety tests can be defined by the equipment manufacturer and reviewed under the conformity assessment scheme. Key words: Audio, Video Electrical Safety Test
Audio, Video und Einrichtungen der Informationstechnik - Stückprüfungen der elektrischen Sicherheit in der Fertigung
Appareils audio, vidéo et matériel de traitement de l'information - Essais individuels de série, en production, pour la vérification de la sécurité électrique
L'IEC 62911:2016 définit des procédures d'essais individuels de série pour la vérification de la sécurité électrique destinées à être utilisées pendant ou après la fabrication d'appareils complets, de sous-ensembles ou de composants, conformes à l'IEC 60065, l'IEC 60950-1 ou l'IEC 62368-1 et alimentés par un réseau d'alimentation en courant continu ou par un réseau d'alimentation en courant alternatif, afin de détecter des défaillances de fabrication et des tolérances inacceptables dans les matériaux et la fabrication. Il n'est pas nécessaire de réaliser tous les essais définis dans la présente norme sur le site de fabrication du produit fini. Le lieu optimal pour réaliser les essais individuels de série pour la vérification de la sécurité électrique peut être déterminé par le fabricant d'appareils et révisé par le système d'évaluation de la conformité. Mots-clés: audio, video, vérification de la sécurité électrique
Oprema za avdio, video in informacijsko tehnologijo - Redno preskušanje električne varnosti v proizvodnji
Ta mednarodni standard določa redne preskuse električne varnosti za uporabo pri/po proizvodnji celotne opreme, podsestavov ali komponent, ki so v skladu s standardi IEC 60065, IEC 60950-1 ali IEC 62368-1 in se napajajo prek izmeničnega ali enosmernega napajalnega omrežja, za odkrivanje proizvodnih napak ter nesprejemljivih odstopanj v izdelavi in materialih.
OPOMBA: Ni nujno, da se vsi preskusi, določeni v tem standardu, opravijo na lokaciji proizvodnje končnega izdelka. Optimalna lokacija za redne preskuse električne varnosti je lahko določena s strani proizvajalca opreme in pregledana v okviru sheme za ugotavljanje skladnosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2016
1DGRPHãþD
SIST EN 50514:2014
2SUHPD]DDYGLRYLGHRLQLQIRUPDFLMVNRWHKQRORJLMR5HGQRSUHVNXãDQMH
HOHNWULþQHYDUQRVWLYSURL]YRGQML
Audio, video and information technology equipment - Routine electrical safety testing in
production
Ta slovenski standard je istoveten z: EN 62911:2016
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62911
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2016
ICS 33.160; 35.020 Supersedes EN 50514:2014
English Version
Audio, video and information technology equipment - Routine
electrical safety testing in production
(IEC 62911:2016)
Appareils audio, vidéo et matériel de traitement de Audio, Video und Einrichtungen der Informationstechnik -
l'information - Essais individuels de série, en production, Stückprüfungen der elektrischen Sicherheit in der Fertigung
pour la vérification de la sécurité électrique (IEC 62911:2016)
(IEC 62911:2016)
This European Standard was approved by CENELEC on 2016-02-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62911:2016 E
European foreword
The text of document 108/616/FDIS, future edition 1 of IEC 62911, prepared by IEC/TC 108 "Safety of
electronic equipment within the field of audio/video, information technology and communication
technology" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN
62911:2016.
The following dates are fixed:
• latest date by which the document has to be (dop) 2016-11-10
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-02-10
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 50514:2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62911:2016 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60065 - Audio, video and similar electronic EN 60065 -
apparatus - Safety requirements
IEC 60950-1 - Information technology equipment - Safety EN 60950-1 -
-- Part 1: General requirements
IEC 62368-1 - Audio/video, information and EN 62368-1 -
communication technology equipment --
Part 1: Safety requirements
IEC 62911 ®
Edition 1.0 2016-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Audio, video and information technology equipment – Routine electrical safety
testing in production
Appareils audio, vidéo et matériel de traitement de l'information – Essais
individuels de série, en production, pour la vérification de la sécurité électrique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.160, 35.020 ISBN 978-2-8322-3094-7
– 2 – IEC 62911:2016 © IEC 2016
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Conformance . 5
5 Routine electrical safety tests . 6
5.1 Resistance of protective bonding system . 6
5.2 Electric strength test . 6
6 Records of tests . 9
Table 1 – Test voltage for equipment with a.c. mains . 7
Table 2 – Test voltage for equipment with d.c. mains . 7
Table 3 – DC test voltages . 8
IEC 62911:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
AUDIO, VIDEO AND INFORMATION TECHNOLOGY EQUIPMENT –
ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62911 has been prepared by TC108: Safety of electronic
equipment within the field of audio/video, information technology and communication
technology
The text of this standard is based on the following documents:
FDIS Report on voting
108/616/FDIS 108/635/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
In this standard, the following print types or formats are used:
– requirements proper and normative annexes: in roman type;
– 4 – IEC 62911:2016 © IEC 2016
– compliance statements and test specifications: in italic type;
– notes/explanatory matter: in smaller roman type;
– normative conditions within tables: in smaller roman type;
– terms that are defined in Clause 3: bold.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IEC 62911:2016 © IEC 2016 – 5 –
AUDIO, VIDEO AND INFORMATION TECHNOLOGY EQUIPMENT –
ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION
1 Scope
This International Standard defines routine electrical safety test procedures for use during
or after manufacturing of complete equipment, sub-assemblies or components, complying with
IEC 60065, IEC 60950-1 or IEC 62368-1 and powered by an a.c. mains supply or d.c. mains
supply, to detect manufacturing failures and unacceptable tolerances in manufacturing and
materials.
NOTE All the tests defined in this standard do not necessarily have to be performed at the end product
manufacturing location. The optimal location for the routine electrical safety tests can be defined by the
equipment manufacturer and reviewed under the conformity assessment scheme.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60065, Audio, video and similar electronic apparatus – Safety requirements
IEC 60950-1, Information technology equipment – Safety – Part 1: General requirements
IEC 62368-1, Audio/video, information and communication technology equipment – Part 1:
Safety requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 60065, IEC 60950-1
and IEC 62368-1, as well as the following apply.
3.1
routine electrical safety test
electrical safety test to which each individual equipment is subjected during or at the end of
manufacture
4 Conformance
Equipment shall pass the routine electrical safety tests of Clause 5 where applicable and
the results of these tests shall be recorded according to Clause 6 prior to shipment from the
manufacturing site.
NOTE Practical mea
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.