EN IEC 61189-2-801:2023

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials

This International Standard specifies a test method to be followed for Thermal Performance via carbon ink heating. The method employs a screened-on pattern of carbon ink used to determine the thermal performance of a dielectric layer on a metal base plate.

Prüfverfahren für Elektromaterialien, Leiterplatten und andere Verbindungsstrukturen und Baugruppen - Teil 2-801: Prüfung der thermischen Leitfähigkeit für Grundwerkstoffe

Méthodes d’essai pour les matériaux électriques, les cartes imprimées et autres structures d’interconnexion et ensembles - Partie 2-801: Essai de conductivité thermique pour matériaux de base

L’IEC 61189-2-801:2023 spécifie une méthode d’essai à suivre pour évaluer la performance thermique par chauffage d’encre à base de carbone. La méthode utilise un motif sérigraphié d’encre à base de carbone pour déterminer la performance thermique d’une couche diélectrique sur une plaque de base métallique.

Preskusne metode za električne materiale, tiskana vezja in druge povezovalne strukture in sestave - 2-801. del: Preskus toplotne prevodnosti osnovnih materialov

Ta mednarodni standard določa preskusno metodo za uporabo pri določanju toplotne učinkovitosti s segrevanjem ogljikovega črnila. Metoda uporablja sitotiskan vzorec ogljikovega črnila, ki se uporablja za določanje toplotne učinkovitosti dielektrične plasti na kovinski osnovni plošči.

General Information

• Status: Published
• Publication Date: 07-Sep-2023
• ICS: 31.180 - Printed circuits and boards
• Technical Committee: CLC/SR 91 - Electronics assembly technology
• Drafting Committee: IEC/TC 91 - IEC_TC_91
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 08-Sep-2023
• Completion Date: 08-Sep-2023
• Ref Project: SIST EN IEC 61189-2-801:2023 - Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61189-2-801:2023
01-november-2023
Preskusne metode za električne materiale, tiskana vezja in druge povezovalne
strukture in sestave - 2-801. del: Preskus toplotne prevodnosti osnovnih
materialov
Test methods for electrical materials, printed board and other interconnection structures
and assemblies - Part 2-801: Thermal conductivity test for base materials
Prüfverfahren für Elektromaterialien, Leiterplatten und andere Verbindungsstrukturen
und Baugruppen – Teil 2-801: Prüfung der thermischen Leitfähigkeit für Grundwerkstoffe
Méthodes d’essai pour les matériaux électriques, les cartes imprimées et autres
structures d’interconnexion et ensembles - Partie 2-801: Essai de conductivité thermique
pour matériaux de base
Ta slovenski standard je istoveten z: EN IEC 61189-2-801:2023
ICS:
31.180 Tiskana vezja (TIV) in tiskane Printed circuits and boards
plošče
SIST EN IEC 61189-2-801:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61189-2-801:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 61189-2-801:2023


EUROPEAN STANDARD EN IEC 61189-2-801

NORME EUROPÉENNE

EUROPÄISCHE NORM September 2023
ICS 31.180

English Version
Test methods for electrical materials, printed boards and other
interconnection structures and assemblies - Part 2-801: Thermal
conductivity test for base materials
(IEC 61189-2-801:2023)
Méthodes d'essai pour les matériaux électriques, les cartes Prüfverfahren für Elektromaterialien, Leiterplatten und
imprimées et autres structures d'interconnexion et andere Verbindungsstrukturen und Baugruppen - Teil 2-
ensembles - Partie 2-801: Essai de conductivité thermique 801: Prüfung der thermischen Leitfähigkeit für
pour matériaux de base Grundwerkstoffe
(IEC 61189-2-801:2023) (IEC 61189-2-801:2023)
This European Standard was approved by CENELEC on 2023-08-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61189-2-801:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61189-2-801:2023
EN IEC 61189-2-801:2023 (E)
European foreword
The text of document 91/1757/CDV, future edition 1 of IEC 61189-2-801, prepared by IEC/TC 91
"Electronics assembly technology" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 61189-2-801:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-05-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-08-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61189-2-801:2023 was approved by CENELEC as a
European Standard without any modification.

2

---------------------- Page: 4 ----------------------
SIST EN IEC 61189-2-801:2023





IEC 61189-2-801

®


Edition 1.0 2023-07




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE
colour

inside










Test methods for
...