EN 62386-102:2014

Digital addressable lighting interface - Part 102: General requirements - Control gear

IEC 62386-102:2014 is applicable to control gear in a bus system for control by digital signals of electronic lighting equipment. This electronic lighting equipment should be in line with the requirments of IEC 61347, with the addition of d.c. supplies. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) elimination of all non-control gear relevant definitions, b) improvement of the requirements for control gear by clarifying the description, c) improvement of the test command iterations to increase the compatibility, d) addition of new commands, and e) the deletion of the requirements for: 1) timing; 2) control devices. The requirements for timing are now in Part 101 and the requirments for control devices are in Part 103.

Digital adressierbare Schnittstelle für die Beleuchtung - Teil 102: Allgemeine Anforderungen - Betriebsgeräte

Interface d’éclairage adressable numérique - Partie 102: Exigences générales - Appareillages de commande

L'IEC 62386-102:2014 est applicable aux appareillages de commande dans un système à bus de commande par signaux numériques des équipements d'éclairage électroniques. Il convient que ces équipements soient conformes aux exigences de l'IEC 61347, avec l'ajout des sources d'alimentation en courant continu. Cette deuxième édition annule et remplace la première édition parue en 2009. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) suppression de toutes les définitions non associées aux appareillages de commande, b) amélioration des exigences pour les appareillages de commande par une clarification de la description, c) amélioration des itérations de commandes d'essai pour une meilleure compatibilité, d) addition de nouvelles commandes, et e) suppression des exigences pour: 1) le cadencement; 2) les dispositifs de commande. Les exigences pour le cadencement sont désormais incluses dans la Partie 101 et les exigences pour les dispositifs de commande le sont dans la Partie 103.

Digitalni naslovljivi vmesnik za razsvetljavo - 102. del: Splošne zahteve - Krmilje (IEC 62386-102:2014)

Ta del standarda IEC 62386 se uporablja za krmilje v sistemu vodil za krmiljenje elektronske opreme
za razsvetljavo z digitalnimi signali. Ta elektronska oprema za razsvetljavo bi morala biti v skladu
z zahtevami iz standarda IEC 61347, z dodatkom enosmernega napajanja.
OPOMBA: Preskusi, obravnavani v tem standardu, so tipski preskusi. Zahteve za preskušanje posameznega krmilja med proizvodnjo niso vključene.

General Information

• Status: Published
• Publication Date: 18-Dec-2014
• Withdrawal Date: 11-Dec-2017
• ICS: 29.140 - Lamps and related equipment
• ICS: 29.140.50 - Lighting installation systems
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/TC 34 - IEC_TC_34
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 19-Dec-2014
• Completion Date: 19-Dec-2014
• Ref Project: SIST EN 62386-102:2015 - Digital addressable lighting interface - Part 102: General requirements - Control gear

Relations

• Replaces: EN 62386-102:2009 - Digital addressable lighting interface - Part 102: General requirements - Control gear
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 62386-102:2022 - Digital addressable lighting interface - Part 102: General requirements - Control gear
• Effective Date: 27-Dec-2022
• Amended By: EN 62386-102:2014/A1:2018 - Digital addressable lighting interface - Part 102: General requirements - Control gear
• Effective Date: 22-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2015
1DGRPHãþD
SIST EN 62386-102:2009
Digitalni naslovljivi vmesnik za razsvetljavo - 102. del: Splošne zahteve - Krmilje
(IEC 62386-102:2014)
Digital addressable lighting interface - Part 102: General requirements - Control gear
Ta slovenski standard je istoveten z: EN 62386-102:2014
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62386-102

NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2014
ICS 29.140; 29.140.50 Supersedes EN 62386-102:2009
English Version
Digital addressable lighting interface -
Part 102: General requirements - Control gear
(IEC 62386-102:2014)
Interface d'éclairage adressable numérique -  Digital adressierbare Schnittstelle für die Beleuchtung -
Partie 102: Exigences générales - Appareillages de Teil 102: Allgemeine Anforderungen - Betriebsgeräte
commande (IEC 62386-102:2014)
(CEI 62386-102:2014)
This European Standard was approved by CENELEC on 2014-12-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62386-102:2014 E
Foreword
The text of document 34C/1099/FDIS, future edition 2 of IEC 62386-102, prepared by
SC 34C "Auxiliaries for lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62386-102:2014.

The following dates are fixed:
(dop) 2015-09-12
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-12-12
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62386-102:2009.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62386-102:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60598-1 NOTE Harmonized as EN 60598-1.
IEC 60669-2-1 NOTE Harmonized as EN 60669-2-1.
IEC 60921 NOTE Harmonized as EN 60921.
IEC 60923 NOTE Harmonized as EN 60923.
1) 1)
IEC 60925 NOTE Harmonized as EN 60925 .
IEC 61547 NOTE Harmonized as EN 61547.
IEC 62386-102:2009 NOTE Harmonized as EN 62386-102:2009.
CISPR 15 NOTE Harmonized as EN 55015.

1)
Withdrawn publication.
- 3 - EN 62386-102:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 61347 Series Lamp controlgear EN 61347 Series
IEC 62386-101 2014 Digital addressable lighting interface - EN 62386-101 2014
Part 101: General requirements - System
Components
IEC 62386-103 2014 Digital addressable lighting interface - EN 62386-103 2014
Part 103: General requirements - Control
devices
IEC 62386-102 ®
Edition 2.0 2014-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface –

Part 102: General requirements – Control gear

Interface d’éclairage adressable numérique –

Partie 102: Exigences générales – Appareillages de commande

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XH
ICS 29.140, 29.140.50 ISBN 978-2-8322-1906-5

– 2 – IEC 62386-102:2014 © IEC 2014
CONTENTS
FOREWORD . 12
INTRODUCTION . 14
1 Scope . 15
2 Normative references . 15
3 Terms and definitions . 15
4 General . 18
4.1 General . 18
4.2 Version number . 18
5 Electrical specification . 18
6 Interface power supply . 18
7 Transmission protocol structure . 19
7.1 General . 19
7.2 16 bit forward frame encoding . 19
7.2.1 General . 19
7.2.2 Address byte . 19
7.2.3 Opcode byte . 19
8 Timing . 19
9 Method of operation . 20
9.1 General . 20
9.2 Control gear . 20
9.3 Dimming curve . 20
9.4 Calculating “targetLevel” . 23
9.5 Fading . 23
9.5.1 General . 23
9.5.2 Fade time . 24
9.5.3 Fade rate . 25
9.5.4 Extended fade time . 26
9.5.5 Using the fade time . 28
9.5.6 Using the fade rate . 28
9.5.7 Behaviour during a fade . 28
9.5.8 Behaviour during startup . 28
9.5.9 Stopping a fade . 28
9.6 Min and max level . 29
9.7 Commands . 29
9.7.1 General . 29
9.7.2 Level instructions without fade . 30
9.7.3 Level instructions initiating a fade . 30
9.7.4 Configuration instructions . 30
9.7.5 Queries . 30
9.7.6 Special commands . 31
9.7.7 Application extended commands. 31
9.8 Command iterations . 31
9.8.1 General . 31
9.8.2 Command iteration of “UP” and “DOWN” commands . 31
9.8.3 DAPC SEQUENCE (deprecated) . 31

IEC 62386-102:2014 © IEC 2014 – 3 –
9.9 Modes of operation . 32
9.9.1 General . 32
9.9.2 Operating mode 0x00: standard mode . 32
9.9.3 Operating mode 0x01 to 0x7F: reserved . 32
9.9.4 Operating mode 0x80 to 0xFF: manufacturer specific modes . 32
9.10 Memory banks . 33
9.10.1 General . 33
9.10.2 Memory map . 33
9.10.3 Selecting a memory bank location . 34
9.10.4 Memory bank reading . 34
9.10.5 Memory bank writing . 34
9.10.6 Memory bank 0 . 35
9.10.7 Memory bank 1 . 37
9.10.8 Manufacturer specific memory banks . 39
9.10.9 Reserved memory banks . 39
9.11 Reset . 39
9.11.1 Reset operation . 39
9.11.2 Reset memory bank operation . 39
9.12 System failure . 39
9.13 Power on . 40
9.14 Assigning short addresses .
...