iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 63047:2021

(Main)

Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement

Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement

This document specifies the format of binary list-mode data at the output of digital data acquisition devices used for the detection and measurement of radiation. Such data acquisition devices may employ digital signal processors (DSP) and field-programmable gate arrays (FPGA) in combination with memory and a communication interface with a computer.

Nukleare Instrumentierung - Datenformat für digitale Datenerfassung im List-Mode für Strahlungsnachweis und -messung

Instrumentation nucléaire - Format de données pour l'acquisition de données numériques en mode liste utilisées dans la détection et la mesure des rayonnements

Jedrska merilna oprema - Podatkovni format za zajem digitalnih podatkov v obliki seznama, ki se uporablja za odkrivanje in merjenje sevanja (IEC 63047:2018 + COR1:2020)

General Information

Status
Published
Publication Date
11-Feb-2021
ICS
27.120.01 - Nuclear energy in general
Technical Committee
CLC/TC 45B - Radiation protection instrumentation
Drafting Committee
CLC/TC 45B - Radiation protection instrumentation
Current Stage
6060 - Document made available - Publishing
Start Date
12-Feb-2021
Due Date
24-Jan-2023
Completion Date
12-Feb-2021
Ref Project
SIST EN IEC 63047:2021 - Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement (IEC 63047:2018 + COR1:2020)

Buy Standard

EN IEC 63047:2021 - BARVE ! POZOR !! K dokumentoma IEC 63047:2018 in IEC 63047:2018/COR1:2020 je priložena še datoteka ASN "iec63047{ed1.0}SoftwareSupplement".EN IEC 63047:2021 - BARVE ! POZOR !! K dokumentoma IEC 63047:2018 in IEC 63047:2018/COR1:2020 je priložena še datoteka ASN "iec63047{ed1.0}SoftwareSupplement".
PreviousNext
Standard
EN IEC 63047:2021 - BARVE ! POZOR !! K dokumentoma IEC 63047:2018 in IEC 63047:2018/COR1:2020 je priložena še datoteka ASN "iec63047{ed1.0}SoftwareSupplement".
English language
113 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2021
Jedrska merilna oprema - Podatkovni format za zajem digitalnih podatkov v obliki
seznama, ki se uporablja za odkrivanje in merjenje sevanja (IEC 63047:2018 +
COR1:2020)
Nuclear instrumentation - Data format for list mode digital data acquisition used in
radiation detection and measurement (IEC 63047:2018 + COR1:2020)
Nukleare Instrumentierung - Datenformat für digitale Datenerfassung im List-Mode für
Strahlungsnachweis und -messung (IEC 63047:2018 + COR1:2020)
Instrumentation nucléaire - Format de données pour l'acquisition de données
numériques en mode liste utilisées dans la détection et la mesure des rayonnements
(IEC 63047:2018 + COR1:2020)
Ta slovenski standard je istoveten z: EN IEC 63047:2021
ICS:
17.240 Merjenje sevanja Radiation measurements
27.120.01 Jedrska energija na splošno Nuclear energy in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 63047

NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2021
ICS 27.120.01
English Version
Nuclear instrumentation - Data format for list mode digital data
acquisition used in radiation detection and measurement
(IEC 63047:2018 + COR1:2020)
Instrumentation nucléaire - Format de données pour Nukleare Instrumentierung - Datenformat für digitale
l'acquisition de données numériques en mode liste utilisées Datenerfassung im List-Mode für Strahlungsnachweis und -
dans la détection et la mesure des rayonnements messung
(IEC 63047:2018 + COR1:2020) (IEC 63047:2018 + COR1:2020)
This European Standard was approved by CENELEC on 2021-01-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63047:2021 E
European foreword
This document (EN IEC 63047:2021) consists of the text of IEC 63047:2018 prepared by SC 45B
"Radiation protection instrumentation" of IEC/TC 45 "Nuclear instrumentation".
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-01-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-01-25
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 63047:2018 was approved by CENELEC as a European
Standard without any modification.

As impacted by IEC 63047:2018/COR1:2020.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62755 - Radiation protection instrumentation - Data - -
format for radiation instruments used in the
detection of illicit trafficking of radioactive
materials
ISO/IEC 8824-1 2015 Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of
basic notation
ISO/IEC 8825-7 - Information technology - ASN.1 encoding - -
rules - Part 7: Specification of Octet
Encoding Rules (OER)
ISO/IEC 9834 - Information technology – Procedures for - -
the operation of object identifier registration
authorities: General procedures and top
arcs of the international object identifier
tree
ISO/IEC 10646 2017 Information technology - Universal Coded - -
Character Set (UCS)
ISO 8601 - Data elements and interchange formats - - -
Information interchange - Representation
of dates and times
IEEE 754 - IEEE Standard for Floating-Point - -
Arithmetic
IEC 63047 ®
Edition 1.0 2018-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Nuclear instrumentation – Data format for list mode digital data acquisition used

in radiation detection and measurement

Instrumentation nucléaire – Format de données pour l'acquisition de données

numériques en mode liste utilisées dans la détection et la mesure des

rayonnements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.120.01 ISBN 978-2-8322-6034-0

– 2 – IEC 63047:2018  IEC 2018
CONTENTS
FOREWORD . 10
INTRODUCTION . 12
1 Scope . 13
2 Normative references . 13
3 Terms and definitions, abbreviated terms and notations . 14
3.1 Terms and definitions . 14
3.2 Abbreviated terms . 18
3.3 Notations . 18
3.3.1 Graphical notation . 18
3.3.2 ASN.1 notation . 18
3.3.3 Decimal separator . 19
3.3.4 Hexadecimal and binary numbers . 19
4 General requirements . 19
4.1 How to use this document . 19
4.2 The use of Abstract Syntax Notation One (ASN.1) . 19
4.2.1 General . 19
4.2.2 Encoding rule . 19
4.2.3 Extensibility . 19
4.2.4 Object identifier . 20
4.2.5 Optional and default elements . 20
4.3 The concept of list-mode data acquisition . 20
4.4 Channels and devices in a data file or stream . 21
4.5 Applicability to data files and streams . 22
4.6 Relation with IEC 62755 data format files . 23
4.7 Data security. 24
5 ASN.1 type definitions . 24
5.1 Overview. 24
5.2 ASN.1 types . 27
5.3 The REAL32 and REAL64 type . 27
5.3.1 Definition . 27
5.3.2 Use . 27
5.4 The REAL32List, REAL64List and INTEGERList types . 27
5.4.1 Definition . 27
5.4.2 Use . 28
5.5 The Numeric type . 28
5.5.1 Definition . 28
5.5.2 Use . 28
5.6 The UTCDateTime . 28
5.6.1 Definition . 28
5.6.2 Use . 28
5.7 The Range type . 28
5.7.1 Definition . 28
5.7.2 Use . 28
5.8 The TimeStamp type . 29
5.8.1 Definition . 29
5.8.2 Use . 29

IEC 63047:2018  IEC 2018 – 3 –
5.9 The SyncStatus type . 29
5.9.1 Definition . 29
5.9.2 Use . 29
5.10 The FlagKind type . 29
5.10.1 Definition . 29
5.10.2 Use . 29
5.11 The AccuracyKind type . 30
5.11.1 Definition . 30
5.11.2 Use . 30
5.12 The Listmodedata type . 30
5.12.1 Definition . 30
5.12.2 Use . 30
5.13 The Header type . 31
5.13.1 Definition . 31
5.13.2 Use .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62372:2022(Main)
Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution
SIST EN IEC 62372:2023

This document is applicable to housed scintillators for registration and spectrometry of alpha-, beta-, gamma-, X-ray and neutron radiation. Their basic parameters such as a light output and intrinsic resolution are established. The document does not apply to gas or liquid scintillators and scintillators for counting or current measurement.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62976:2019/A1:2022(Amendment)
Industrial non-destructive testing equipment - Electron linear accelerator
SIST EN IEC 62976:2019/A1:2023
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62976:2019(Main)
Industrial non-destructive testing equipment - Electron linear accelerator
SIST EN IEC 62976:2019

This document gives the rules of naming, technical requirements, test methods, inspection, marking, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT). This document applies to NDT electron linear accelerator equipment in the X-ray energy range of 1 MeV to 15 MeV, including the accelerator equipment for radiographic film,computed radiography with imaging plates, real-time imaging, digital detector array and industrial computerized tomography.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62372:2022(Main)
Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution
SIST EN IEC 62372:2023

This document is applicable to housed scintillators for registration and spectrometry of alpha-, beta-, gamma-, X-ray and neutron radiation. Their basic parameters such as a light output and intrinsic resolution are established. The document does not apply to gas or liquid scintillators and scintillators for counting or current measurement.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62976:2019/A1:2022(Amendment)
Industrial non-destructive testing equipment - Electron linear accelerator
SIST EN IEC 62976:2019/A1:2023
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62976:2019(Main)
Industrial non-destructive testing equipment - Electron linear accelerator
SIST EN IEC 62976:2019

This document gives the rules of naming, technical requirements, test methods, inspection, marking, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT). This document applies to NDT electron linear accelerator equipment in the X-ray energy range of 1 MeV to 15 MeV, including the accelerator equipment for radiographic film,computed radiography with imaging plates, real-time imaging, digital detector array and industrial computerized tomography.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-9:2024(Main)
Rotating electrical machines - Part 9: Noise limits
SIST EN IEC 60034-9:2025

IEC 60034-9:2021 specifies test methods for the determination of sound power level of rotating electrical machines and specifies maximum A-weighted sound power levels for factory acceptance testing of network-supplied, rotating electrical machines in accordance with lEC 60034-1, having methods of cooling according to lEC 60034-6 and degrees of protection according to lEC 60034-5, and having the following characteristics: - standard design, either AC or DC, without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level - rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA) - rated speed not greater than 3 750 min–1 This fifth edition cancels and replaces the fourth edition, published in 2003 and its amendment 1, published in 2007. This edition includes the following significant technical changes with respect to the previous edition: a) In Table 2 and Table 3 cooling methods IC01, IC11, IC21 and IC31, IC71, IC81 are now covered. b) This edition adds Table 3 for 60 Hz machines, whereas Table 2, which covers only 50 Hz machines, has no change in levels. c) In Table 3, grade A is added to harmonize the highest levels seen in IEC and NEMA, whereas grade B was added to harmonize the lowest, more restrictive levels seen in IEC and NEMA. d) The clause “Determination of noise increments caused by converter supply” has been shifted to Annex B and renamed “Information on typical noise increments caused by converter supply”.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-12:2024(Main)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
SIST EN IEC 60034-12:2025

IEC 60034-12:2024 is available as IEC 60034-12:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-12:2024 specifies the parameters for eight designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034‑1 that: - have a rated voltage up to 1 000 V; - are intended for direct-on-line or star-delta starting; - are rated on the basis of duty type S1; - are constructed to any degree of protection as defined in IEC 60034-5 and explosion protection. This document also applies to dual voltage motors provided that the flux saturation level is the same for both voltages. This fourth edition cancels and replaces the third edition published in 2016. Aligned with the requirements for explosion protected motors from TC31 WG27 - new clause on methods for measuring locked-rotor current and torque; - new informative annex on the general current and torque characteristics with locked rotor; - new informative annex on correction of voltage and frequency; - aligned with the requirements for explosion protected motors from TC31 WG27.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60335-2-39:2024(Main)
Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
SIST EN IEC 60335-2-39:2025

IEC 60335-2-39:2012 deals with the safety of electrically operated commercial multi-purpose cooking pans not intended for household and similar use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. This standard also deals with pressurized appliances and appliances with pressurized parts. These appliances are used for processing food for commercial consumption, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by these types of appliances. Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. The principal changes in this edition as compared with the fifth edition of IEC 60335-2-39 are as follows (minor changes are not listed): - addition to definition of portable appliances, atmospheric multi-purpose cooking and rated pressure; - deletion of equipotential symbol 5021 of IEC 60417 covered by Part 1; - addition of instructions for multi-purpose cooking pans; - modification on leakage current permissible for portable class l appliances; - addition to abnormal test requirements; - addition to mechanical hazard test for multi-purpose cooking pans; - addition of construction test for multi-purpose cooking pans; - addition to construction requirements for lids and theirs grips; - addition to construction requirements for positioning of pressure reliefs; - addition to construction's fixed appliances which are moved forward and backward for cleaning purposes.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Multi-purpose cooking pans.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60335-2-40:2024(Main)
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
SIST EN IEC 60335-2-40:2025

This European Standard deals with the safety of electric heat pumps, sanitary hot water heat pumps and air conditioners, incorporating motor-compressors as well as hydronic fan coils units, dehumidifiers (with or without motor-compressors), thermoelectric heat pumps and partial units. Their maximum rated voltage being not more than 300 V for single phase appliances and 600 V for multi-phase appliances. Appliances not intended for normal household use but which nevertheless can be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.

  • Draft
    158 pages
    English language
    sale 10% off
    e-Library read for
    1 day