Single-capped fluorescent lamps - Safety specifications

This International Standard specifies the safety requirements for single-capped fluorescent lamps for general lighting purposes of all groups having caps according to Table 1.
It also specifies the method a manufacturer should use to show compliance with the requirements of this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure which can be used to make limited assessment of batches are also given in this standard.
NOTE Compliance with this standard concerns only safety criteria and does not take into account the performance of single-capped fluorescent lamps for general lighting purposes with respect to luminous flux, colour, starting and operational characteristics. For this information, readers are referred to IEC 60901.
It may be expected that lamps which comply with this standard will operate safely at supply voltages between 90 % and 110 % of rated supply voltage of the used ballast and when operated with a ballast complying with IEC 61347-2-3 or IEC 61347-2-8 with a starting device complying with IEC 60155 (if applicable) and in a luminaire complying with IEC 60598-1.

Einseitig gesockelte Leuchtstofflampen – Sicherheitsanforderungen

Lampes à fluorescence à culot unique - Specifications de sécurité

Fluorescenčne sijalke z enim vznožkom - Varnostne specifikacije

Ta mednarodni standard določa varnostne zahteve za fluorescenčne sijalke z enim vznožkom za splošne potrebe razsvetljave vseh skupin, ki imajo vznožke v skladu s preglednico 1. Prav tako določa metodo, ki jo mora uporabiti proizvajalec, da izkaže skladnost z zahtevami tega standarda na podlagi presoje celotne proizvodnje v povezavi s svojimi zapisi o preskusih končnih izdelkov. Ta metoda se lahko uporablja tudi za certifikacijo. Podrobnosti o šaržnem preskusnem postopku, ki se lahko uporablja za omejeno oceno serij, so prav tako podane v tem standardu. OPOMBA: Skladnost s tem standardom zadeva samo varnostne kriterije in ne upošteva delovanja fluorescenčnih sijalk z enim vznožkom za splošne potrebe razsvetljave z upoštevanjem svetlobnega toka, barve, značilnosti zagona in delovanja. Te informacije bralci najdejo v IEC 60901. Lahko se pričakuje, da bodo sijalke, ki so v skladu s tem standardom, delovale varno pri napajalni napetosti med 90 % in 110 % ocenjene napajalne napetosti uporabljenega balasta, kadar bodo delovale z balastom, ki je v skladu z IEC 61347-2-3 ali IEC 61347-2-8, z zagonsko napravo, ki je v skladu z IEC 60155 (če velja) in v sijalki, ki je v skladu z IEC 60598-1.

General Information

Status
Published
Publication Date
21-Feb-2013
Withdrawal Date
31-Oct-2015
Current Stage
6060 - Document made available - Publishing
Start Date
22-Feb-2013
Completion Date
22-Feb-2013

Relations

Buy Standard

Amendment
EN 61199:2011/A1:2013
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61199:2011/A1:2013
01-julij-2013
)OXRUHVFHQþQHVLMDONH]HQLPY]QRåNRP9DUQRVWQHVSHFLILNDFLMH
Single-capped fluorescent lamps - Safety specifications
Einseitig gesockelte Leuchtstofflampen – Sicherheitsanforderungen
Lampes à fluorescence à culot unique - Specifications de sécurité
Ta slovenski standard je istoveten z: EN 61199:2011/A1:2013
ICS:
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
SIST EN 61199:2011/A1:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61199:2011/A1:2013

---------------------- Page: 2 ----------------------

SIST EN 61199:2011/A1:2013

EUROPEAN STANDARD
EN 61199/A1

NORME EUROPÉENNE
February 2013
EUROPÄISCHE NORM

ICS 29.140.30


English version


Single-capped fluorescent lamps -
Safety specifications
(IEC 61199:2011/A1:2012)


Lampes à fluorescence à culot unique -  Einseitig gesockelte Leuchtstofflampen -
Specifications de sécurité Sicherheitsanforderungen
(CEI 61199:2011/A1:2012) (IEC 61199:2011/A1:2012)





This amendment A1 modifies the European Standard EN 61199:2011; it was approved by CENELEC on 2012-
11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61199:2011/A1:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61199:2011/A1:2013
EN 61199:2011/A1:2013 - 2 -

Foreword
The text of document 34A/1538/CDV, future edition 1 of IEC 61199:2011/A1, prepared by SC 34A,
"Lamps", of IEC TC 34, "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 61199:2011/A1:2013.

The following dates are fixed:
(dop) 2013-08-22
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-11-01

standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2006/95/EC).

Endorsement notice
The text of the International Standard IEC 61199:2011/A1:2012 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61199:2011/A1:2013



IEC 61199

®


Edition 3.0 2012-09




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




AMENDMENT 1

AMENDEMENT 1





Single-capped fluorescent lamps – Safety specifications



Lampes à fluorescence à culot unique – Spécifications de sécurité



















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX D


ICS 29.140.30 ISBN 978-2-83220-386-6



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 -----------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.