EN 62133-2:2017/A1:2021
(Amendment)Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems
The contents of the corrigendum of December 2021 have been included in this copy.
Sekundärzellen und -batterien mit alkalischen oder anderen nicht-säurehaltigen Elektrolyten - Sicherheitsanforderungen für tragbare gasdichte Sekundärzellen und daraus hergestellte Batterien für die Verwendung in tragbaren Geräten - Teil 2: Lithium-Systeme
Accumulateurs alcalins et autres accumulateurs à électrolyte non acide - Exigences de sécurité pour les accumulateurs au lithium portables étanches, et pour les batteries qui en sont constituées, destinés à l'utilisation dans des applications portables - Partie 2: Systèmes au lithium
Le contenu du corrigendum de décembre 2021 a été pris en considération dans cet exemplaire.
Sekundarni členi in baterije z alkalnimi ali drugimi nekislinskimi elektroliti - Varnostne zahteve za prenosne zatesnjene sekundarne člene in za baterije, narejene iz njih, za uporabo v prenosnih napravah - 2. del: Litijevi sistemi - Dopolnilo A1
General Information
Relations
Overview
EN 62133-2:2017/A1:2021 (CLC) is the European adoption of IEC 62133-2 Amendment 1 and specifies safety requirements for portable sealed secondary cells and batteries for lithium systems. This amendment (A1, September 2021) incorporates corrigenda and editorial/technical updates to the 2017 edition and is intended for batteries used in portable applications. It is widely used for regulatory compliance, conformity assessment and safety testing across CENELEC member countries.
Key topics and technical requirements
- Scope: Safety requirements for lithium-based portable sealed secondary cells and batteries, including test procedures and design evaluation.
- Charging procedures: Updated second charging procedure (clause 7.1.2) defines stabilization at highest/lowest test temperatures, constant-current/constant-voltage charging until current reduces to 0.05·I_A, and references a Table 2 for temperature and voltage/current limits.
- Mechanical abuse tests: Crush test (7.3.5) requires fully charged cells to be crushed between flat surfaces with a specified force device; the amendment specifies a force of 13 kN ± 0.78 kN and conditions for releasing force on abrupt voltage drop.
- Electrical abuse and protection: Over-charge requirements (7.3.6) clarify that battery overcharge protection circuitry, if provided, shall protect cells to prevent fire or explosion.
- Forced internal short-circuit and temperature conditioning: Design evaluation updates include ambient temperature conditions for tests (Table 5) with test temperatures defined relative to charging limits (±2 °C tolerance).
- Component standards: Annex F (informative) emphasizes that components relied upon for battery safety should meet appropriate component standards. Example references include IEC 60127 (miniature fuses), IEC 60738-1 (PTC thermistors), and IEC 60691 (thermal links).
Practical applications
EN 62133-2:2017/A1:2021 is applied to the design, testing and certification of lithium-based batteries used in:
- Portable electronics (smartphones, tablets)
- Power banks and battery packs
- Wearables and medical portable devices
- Handheld tools and portable instrumentation
Use of this standard helps manufacturers and test laboratories demonstrate battery safety, reduce risk of thermal runaway, and meet market access requirements in Europe and other regions recognizing IEC/CENELEC standards.
Who should use this standard
- Battery designers and OEMs developing lithium battery packs
- Compliance and safety engineers performing type and design evaluations
- Test laboratories conducting mechanical/electrical abuse tests
- Certification bodies and regulators assessing conformity to battery safety requirements
Related standards
- IEC 62133-2 / EN 62133-2 (base standard)
- Component standards referenced in Annex F: IEC 60127, IEC 60738-1, IEC 60691
Keywords: EN 62133-2:2017/A1:2021, battery safety, lithium systems, portable sealed secondary cells, CLC, IEC 62133-2, overcharge protection, crush test, forced internal short-circuit.
Frequently Asked Questions
EN 62133-2:2017/A1:2021 is a amendment published by CLC. Its full title is "Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems". This standard covers: The contents of the corrigendum of December 2021 have been included in this copy.
The contents of the corrigendum of December 2021 have been included in this copy.
EN 62133-2:2017/A1:2021 is classified under the following ICS (International Classification for Standards) categories: 29.220.30 - Alkaline secondary cells and batteries. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 62133-2:2017/A1:2021 has the following relationships with other standards: It is inter standard links to EN 62133-2:2017, EN 62133-2:2017/A1:2021/AC:2022-01. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 62133-2:2017/A1:2021 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2021
Sekundarni členi in baterije z alkalnimi ali drugimi nekislinskimi elektroliti -
Varnostne zahteve za prenosne zatesnjene sekundarne člene in za baterije,
narejene iz njih, za uporabo v prenosnih napravah - 2. del: Litijevi sistemi -
Dopolnilo A1
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety
requirements for portable sealed secondary cells, and for batteries made from them, for
use in portable applications - Part 2: Lithium systems
Accumulateurs alcalins et autres accumulateurs à électrolyte non acide -
Exigences de sécurité pour les accumulateurs portables
étanches, et pour les batteries qui en sont constituées, destinés
à l'utilisation dans des applications portables - Partie 1: Systèmes
au lithium
Ta slovenski standard je istoveten z: EN 62133-2:2017/A1:2021
ICS:
29.220.30 Alkalni sekundarni členi in Alkaline secondary cells and
baterije batteries
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62133-2:2017/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2021
ICS 29.220.30
English Version
Secondary cells and batteries containing alkaline or other non-
acid electrolytes - Safety requirements for portable sealed
secondary cells, and for batteries made from them, for use in
portable applications - Part 2: Lithium systems
(IEC 62133-2:2017/AMD1:2021)
Accumulateurs alcalins et autres accumulateurs à Sekundärzellen und -batterien mit alkalischen oder anderen
électrolyte non acide - Exigences de sécurité pour les nichtsäurehaltigen Elektrolyten - Sicherheitsanforderungen
accumulateurs au lithium portables étanches, et pour les für tragbare gasdichte Sekundärzellen und daraus
batteries qui en sont constituées, destinés à l'utilisation hergestellte Batterien für die Verwendung in tragbaren
dans des applications portables - Partie 2: Systèmes au Geräten - Teil 2: Lithium-Systeme
lithium (IEC 62133-2:2017/AMD1:2021)
(IEC 62133-2:2017/AMD1:2021)
This amendment A1 modifies the European Standard EN 62133-2:2017; it was approved by CENELEC on 2021-08-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62133-2:2017/A1:2021 E
European foreword
The text of document 21A/760/FDIS, future IEC 62133-2/AMD1, prepared by SC 21A “Secondary cells
and batteries containing alkaline or other non-acid electrolytes” of IEC/TC 21 “Secondary cells and
batteries” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–05–19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–08–19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62133-2:2017/AMD1:2021 was approved by CENELEC as
a European Standard without any modification.
IEC 62133-2 ®
Edition 1.0 2021-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Secondary cells and batteries containing alkaline or other non-acid electrolytes
– Safety requirements for portable sealed secondary cells, and for batteries
made from them, for use in portable applications –
Part 2: Lithium systems
Accumulateurs alcalins et autres accumulateurs à électrolyte non acide –
Exigences de sécurité pour les accumulateurs portables étanches, et pour les
batteries qui en sont constituées, destinés à l'utilisation dans des applications
portables –
Partie 2: Systèmes au lithium
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220.30 ISBN 978-2-8322-9987-6
– 2 – IEC 62133-2:2017/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER
NON-ACID ELECTROLYTES – SAFETY REQUIREMENTS FOR PORTABLE
SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM,
FOR USE IN PORTABLE APPLICATIONS –
Part 2: Lithium systems
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, gover
...








Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...