EN 60974-10:2007

Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

Specifies applicable standards and test methods for radio-frequency emissions; applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker; immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. This new edition takes into account new editions of EMC publications.

Lichtbogenschweißeinrichtungen - Teil 10: Anforderungen an die elektromagnetische Verträglichkeit (EMV)

Matériel de soudage à l'arc - Partie 10: Exigences relatives à la compatibilité électromagnétique (CEM)

Spécifie les normes applicables et les méthodes d'essai pour les émissions de radiofréquence; les normes applicables et les méthodes d'essai pour les émissions de courant harmoniques, les fluctuations de tension et les papillotements; les exigences d'immunités et les méthodes d'essai pour les perturbations continues ou transitoires, conduites et rayonnées, y compris les décharges électrostatiques. Cette nouvelle édition prend en considération de nouvelles éditions des publications CEM.

Oprema za obločno varjenje - 10. del: Zahteve za elektromagnetno združljivost (EMC) (IEC 60974-10:2007)

General Information

• Status: Withdrawn
• Publication Date: 11-Dec-2007
• Withdrawal Date: 30-Nov-2010
• ICS: 25.160 - Welding, brazing and soldering
• Technical Committee: CLC/TC 26 - Electric welding
• Drafting Committee: IEC/TC 26 - IEC_TC_26
• Parallel Committee: IEC/TC 26 - IEC_TC_26
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 13-Mar-2017
• Completion Date: 13-Mar-2017
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Directive: 89/336/EEC - Electromagnetic compatibility (EMC)
• Mandate: M/404 - Standardisation Mandate to CEN, CENELEC and ETSI for harmonized standard according to the Electro Magnetic Compatibility (EMC) Directive 2004/108/EC
• Ref Project: SIST EN 60974-10:2008 - Arc welding equipment -- Part 10: Electromagnetic compatibility (EMC) requirements

Relations

• Replaces: EN 60974-10:2003 - Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
• Effective Date: 29-Jan-2023
• Replaced By: EN 60974-10:2014 - Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60974-10:2008
01-april-2008
1DGRPHãþD
SIST EN 60974-10:2003
2SUHPD]DREORþQRYDUMHQMHGHO=DKWHYH]DHOHNWURPDJQHWQR]GUXåOMLYRVW
(0&,(&
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
Lichtbogenschweißeinrichtungen - Teil 10: Anforderungen an die elektromagnetische
Verträglichkeit (EMV)
Matériel de soudage à l'arc - Partie 10: Exigences relatives à la compatibilité
électromagnétique (CEM)
Ta slovenski standard je istoveten z: EN 60974-10:2007
ICS:
25.160.30
33.100.01
SIST EN 60974-10:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60974-10

NORME EUROPÉENNE
December 2007
EUROPÄISCHE NORM

ICS 25.160 Supersedes EN 60974-10:2003


English version


Arc welding equipment -
Part 10: Electromagnetic compatibility (EMC) requirements
(IEC 60974-10:2007)


Matériel de soudage à l'arc -  Lichtbogenschweißeinrichtungen -
Partie 10: Exigences relatives à la Teil 10: Anforderungen an die
compatibilité électromagnétique (CEM) elektromagnetische Verträglichkeit (EMV)
(CEI 60974-10:2007) (IEC 60974-10:2007)




This European Standard was approved by CENELEC on 2007-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60974-10:2007 E

---------------------- Page: 2 ----------------------

EN 60974-10:2007 - 2 -
Foreword
The text of document 26/341/CDV, future edition 2 of IEC 60974-10, prepared by IEC TC 26, Electric
welding, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was approved
by CENELEC as EN 60974-10 on 2007-12-01.
This European Standard supersedes EN 60974-10:2003.
Significant technical changes with respect to EN 60974-10:2003 are:
– application of more stringent r.f. emission limits for the idle mode;
– mandatory classification of arc starting and stabilizing devices as Class A equipment;
– additional immunity tests (surges and r.f. common-mode currents);
– inclusion of informative Annex B, containing the applicable emission limits for information of the user
of the standard.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-12-01
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of
EC Directive 2004/108/EC. See Annex ZZ.
Annexes ZA and ZZ have been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60974-10:2007 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60974-10:2007
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year
1)
IEC 60050-161 –
...