EN IEC 62056-3-1:2021

Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling

IEC 62056-3-1:2021 is available as IEC 62056-3-1:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 62056-3-1:2021 describes two sets of profiles: the first set of profiles allows a bidirectional communication between a client and a server. This set of profiles is made of three profiles allowing local bus data exchange with stations either energized or not. For non-energized stations, the bus supplies energy for data exchange. Three different profiles are supported: • base profile: this three-layer profile provides remote communication services; NOTE 1 This first profile was published in IEC 61142:1993 and became known as the Euridis standard. • profile with DLMS: this profile allows using DLMS services as specified in IEC 61334 4 41; NOTE 2 This second profile was published in IEC 62056-31:1999. • profile with DLMS/COSEM: this profile allows using the DLMS/COSEM Application layer and the COSEM object model as specified in IEC 62056 5 3 and in IEC 62056 6 2 respectively. The three profiles use the same physical layer and they are fully compatible, meaning that devices implementing any of these profiles can be operated on the same bus. The transmission medium is twisted pair using carrier signalling and it is known as the Euridis Bus. The second set of profiles allows unidirectional communication between a given Energy Metering device and a Customer Energy Management System. This second set is made up of three profiles. Subclause 4.2.1 to Clause 8 included specify the bidirectional communication using twisted pair signalling and Clause 9 to 9.5 the unidirectional communication using twisted pair signalling. This second edition cancels and replaces the first edition of IEC 62056-3-1, issued in 2013, and constitutes a technical revision. The main technical changes with regard to the previous edition are as follows: • addition of a profile which makes use of the IEC 62056 DLMS/COSEM Application layer and COSEM object model; • review of the data link layer which is split into two parts: – a pure Data Link layer; – a "Support Manager" entity managing the communication media; • ability to negotiate the communication speed, bringing baud rate up to 9 600 bauds.

Datenkommunikation der elektrischen Energiemessung – DLMS/COSEM – Teil 3-1: Nutzung lokaler Netzwerke mit Trägerfrequenz-Signalübertragung auf verdrillten Zweidrahtleitungen

Échange des données de comptage de l'électricité - La suite DLMS/COSEM - Partie 3-1: Utilisation des réseaux locaux sur paire torsadée avec signal de porteuse

IEC 62056-3-1:2021 est disponible sous forme de IEC 62056-3-1:2021 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente. IEC 62056-3-1:2021 décrit deux ensembles de profils: le premier ensemble permet une communication bidirectionnelle entre un client et un serveur. Cet ensemble est composé de trois profils permettant l’échange de données par bus en local avec des stations alimentées ou non en énergie. Pour les stations téléalimentées, le bus fournit l’énergie pour l’échange des données. Trois différents profils sont pris en charge: • Profil de base: ce profil en trois couches fournit des services de télérelevé; NOTE 1 Ce profil a été publié dans l’IEC 61142:1993 et était alors connu sous le nom de Norme Euridis. • Profil avec DLMS: ce profil permet l’utilisation des services DLMS tels qu’ils sont spécifiés dans l’IEC 61334 4 41; NOTE 2 Ce deuxième profil a été publié dans l’IEC 62056-31: 1999. • Profil avec DLMS/COSEM: ce profil permet l’utilisation de la couche Application de DLMS/COSEM et le modèle objet COSEM tels qu’ils sont spécifiés respectivement dans l’IEC 62056 5 3 et dans l’IEC 62056 6 2. Les trois profils utilisent la même couche physique et ils sont entièrement compatibles, c’est-à-dire que des dispositifs mettant en œuvre l’un de ces profils peuvent fonctionner sur le même bus. Le moyen de transmission est la paire torsadée par signal de porteuse et connue sous le nom de Bus Euridis. Le deuxième ensemble de profils permet une communication unidirectionnelle entre un dispositif de comptage de l’énergie (energy metering device) donné et un système de gestion de l’énergie client (customer energy management system). Ce deuxième ensemble est composé de trois profils. Le paragraphe 4.2.1 à l'Article 8 inclus spécifient la communication bidirectionnelle utilisant le signal avec paire torsadée et l'Article 9 au 9.5 spécifient la communication unidirectionnelle utilisant le signal avec paire torsadée. Cette deuxième édition annule et remplace la première édition de l’IEC 62056-3-1, parue en 2013. Cette édition constitue une révision technique. Les principales modifications techniques par rapport à l’édition précédente sont les suivantes: • Ajout d’un profil qui permet l’utilisation de la couche Application et la modélisation objet DLMS/COSEM de l’IEC 62056; • Révision de la couche liaison de données qui est maintenant scindée en deux parties: – la première est intégralement une couche de liaison de données; – la dernière, nommée “Gestion du Support”, gère le média de communication; • Capacité de négocier la vitesse de communication, portant la vitesse maximale jusqu’à 9 600 bauds.

Izmenjava podatkov meritev električne energije - Niz DLMS/COSEM - 3-1. del: Uporaba lokalnih omrežij prek zvitih parov s signalizacijo po nosilcu

General Information

• Status: Published
• Publication Date: 26-Aug-2021
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• ICS: 35.110 - Networking
• ICS: 91.140.50 - Electricity supply systems
• Technical Committee: CLC/TC 13 - Equipment for electrical energy measurement and load control
• Drafting Committee: IEC/TC 13 - IEC_TC_13
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 27-Aug-2021
• Completion Date: 27-Aug-2021
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Mandate: M/441 - Standardisation mandate to CEN, CENELEC and ETSI in the field of measuring instruments for the development of an open architecture for utility meters involving communication protocols enabling interoperability
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN IEC 62056-3-1:2021 - Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling

Relations

• Replaces: EN 62056-3-1:2014 - Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2021
Nadomešča:
SIST EN 62056-3-1:2014
Izmenjava podatkov meritev električne energije - Niz DLMS/COSEM - 3-1. del:
Uporaba lokalnih omrežij prek zvitih parov s signalizacijo po nosilcu
Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local
area networks on twisted pair with carrier signalling
Ta slovenski standard je istoveten z: EN IEC 62056-3-1:2021
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
35.110 Omreževanje Networking
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62056-3-1

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2021
ICS 17.220.20; 35.110; 91.140.50 Supersedes EN 62056-3-1:2014 and all of its
amendments and corrigenda (if any)
English Version
Electricity metering data exchange - The DLMS/COSEM suite -
Part 3-1: Use of local area networks on twisted pair with carrier
signalling
(IEC 62056-3-1:2021)
Échange des données de comptage de l'électricité - La Datenkommunikation der elektrischen Energiemessung -
suite DLMS/COSEM - Partie 3-1: Utilisation des réseaux DLMS/COSEM - Teil 3-1: Nutzung lokaler Netzwerke mit
locaux sur paire torsadée avec signal de porteuse Trägerfrequenz-Signalübertragung auf verdrillten
(IEC 62056-3-1:2021) Zweidrahtleitungen
(IEC 62056-3-1:2021)
This European Standard was approved by CENELEC on 2021-08-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62056-3-1:2021 E

European foreword
The text of document 13/1794/CDV, future edition 2 of IEC 62056-3-1, prepared by IEC/TC 13
“Electrical energy measurement and control” was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62056-3-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–05–11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–08–11
document have to be withdrawn
This document supersedes EN 62056-3-1:2014 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62056-3-1:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62056-6-1:2017 NOTE Harmonized as EN 62056-6-1:2017 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61334-4-41 1996 Distribution automation using distribution EN 61334-4-41 1996
line carrier systems - Part 4: Data
communication protocols - Section 41:
Application protocol - Distribution line
message specification
IEC 62056-5-3 2017 Electricity metering data exchange - The EN 62056-5-3 2017
DLMS/COSEM suite - Part 5–3:
DLMS/COSEM application layer
IEC 62056-6-2 2017 Electricity metering data exchange - The EN IEC 62056-6-2 2018
DLMS/COSEM suite - Part 6–2: COSEM
interface classes
IEC 62056-51 1998 Electricity metering - Data exchange for - -
meter reading, tariff and load control - Part
51: Application layer protocols
ISO/IEC 8482 1993 Information technology - - -
Telecommunications and information
exchange between systems - Twisted pair
multipoint interconnections
EIA 485 - Electrical characteristics of generators and - -
receivers for use in balanced digital
multipoint systems
IEC 62056-3-1 ®
Edition 2.0 2021-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Electricity metering data exchange – The DLMS/COSEM suite –

Part 3-1: Use of local area networks on twisted pair with carrier signalling

Échange des données de comptage de l'électricité – La suite DLMS/COSEM –

Partie 3-1: Utilisation des réseaux locaux sur paire torsadée avec signal de

porteuse
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.220.20; 35.110; 91.140.50 ISBN 978-2-8322-9940-1

– 2 – IEC 62056-3-1:2021 © IEC 2021
CONTENTS
FOREWORD . 6
1 Scope . 8
2 Normative references . 8
3 Terms, definitions and abbreviated terms . 9
3.1 Terms and definitions. 9
3.2 Abbreviated terms . 9
4 General description . 10
4.1 Basic vocabulary . 10
4.2 Profiles, layers and protocols . 11
4.3 Specification language . 12
4.4 Communication services for local bus data exchange without DLMS . 12
4.5 Communication services for local bus data exchange with DLMS . 21
4.6 Systems management . 22
5 Local bus data exchange without DLMS . 23
5.1 Physical layer . 23
5.2 Data Link layer . 35
5.3 Application layer . 43
6 Local bus data exchange with DLMS . 46
6.1 Physical layer . 46
6.2 Data Link layer . 47
6.3 Application layer . 56
7 Local bus data exchange with DLMS/COSEM . 56
7.1 Model . 56
7.2 Physical Layer . 56
7.3 Data Link layer . 67
7.4 Support Manager layer . 76
7.5 Transport Layer . 80
7.6 Application Layer . 84
8 Local bus data exchange – Hardware . 85
8.1 General . 85
8.2 General characteristics . 85
8.3 Bus specification . 90
8.4 Magnetic plug . 92
8.5 Functional specifications of Primary Station transmitter (for 50 kHz signal) . 94
8.6 Functional specifications of Primary Station receiver (for 50 kHz signal) . 95
8.7 Functional specification of Secondary Station transmitter (for 50 kHz signal) . 96
8.8 Functional specifications of Secondary Station receiver (for 50 kHz signal) . 97
9 Unidirectional local data transmission interface . 98
9.1 Introduction . 98
9.2 General description . 98
9.3 Historical TIC . 98
9.4 Standard TIC . 102
9.5 Unidirectional TIC Hardware . 103
Annex A (normative) Specification language . 110
A.1 Vocabulary and operating rules . 110

IEC 62056-3-1:2021 © IEC 2021 – 3 –
A.2 Entity and Entity Invocation . 111
Annex B (normative) Timing types and characteristics . 112
B.1 Timing type definition . 112
B.2 Timing measurements and characteristics. 113
Annex C (normative) List of fatal errors . 114
Annex D (normative) Coding the command code field of frames . 115
D.1 Command codes for local bus data exchange (Table D.1) . 115
D.2 Codes of commands for data exchange on the local bus with DLMS or
DLMS/COSEM . 115
Annex E (normative) Principle of the CRC . 117
E.1 General . 117
E.2 Operations on the polynomials . 117
E.3 Check procedure.
...