EN 62146-1:2014/A1:2016

Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General

Spannungsausgleichskondensatoren für Hochspannungs-Wechselstrom-Leistungsschalter - Teil 1: Allgemeines

Condensateurs de répartition pour disjoncteurs à courant alternatif haute tension - Partie 1: Généralités

Kondenzatorji za izravnavo potenciala pri visokonapetostnih odklopnikih za izmenični tok - 1. del: Splošno (IEC 62146-1:2013/A1:2016) - Dopolnilo A1

General Information

• Status: Published
• Publication Date: 27-Oct-2016
• Withdrawal Date: 27-Jul-2019
• ICS: 31.060.01 - Capacitors in general
• ICS: 31.060.70 - Power capacitors
• Technical Committee: CLC/SR 33 - Power capacitors
• Drafting Committee: IEC/TC 33 - IEC_TC_33
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 28-Oct-2016
• Completion Date: 28-Oct-2016
• Ref Project: SIST EN 62146-1:2014/A1:2016 - Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General (IEC 62146-1:2013/A1:2016)

Relations

• Amends: EN 62146-1:2014 - Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General
• Effective Date: 24-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2016
.RQGHQ]DWRUML]DL]UDYQDYRSRWHQFLDODSULYLVRNRQDSHWRVWQLKRGNORSQLNLK]D
L]PHQLþQLWRNGHO6SORãQR,(&$'RSROQLOR$
Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General
(IEC 62146-1:2013/A1:2016)
Ta slovenski standard je istoveten z: EN 62146-1:2014/A1:2016
ICS:
31.060.70 0RþQRVWQLNRQGHQ]DWRUML Power capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62146-1:2014/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2016
ICS 31.060.01; 31.060.70
English Version
Grading capacitors for high-voltage alternating current circuit-
breakers - Part 1: General
(IEC 62146-1:2013/A1:2016)
Condensateurs de répartition pour disjoncteurs à courant Spannungsausgleichskondensatoren für Hochspannungs-
alternatif haute tension - Partie 1: Généralités Wechselstrom-Leistungsschalter - Teil 1: Allgemeines
(IEC 62146-1:2013/A1:2016) (IEC 62146-1:2013/A1:2016)
This amendment A1 modifies the European Standard EN 62146-1:2014; it was approved by CENELEC on 2016-07-28. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62146-1:2014/A1:2016 E

European foreword
The text of document 33/583/FDIS, future IEC 62146-1:2013/A1, prepared by IEC/TC 33 “Power
capacitors and their applications” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62146-1:2014/A1:2016.

The following dates are fixed:
(dop) 2017-04-28
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-07-28
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62146-1:2013/A1:2016 was approved by CENELEC as a
European Standard without any modification.
IEC 62146-1 ®
Edition 1.0 2016-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Grading capacitors for high-voltage alternating current circuit-breakers –

Part 1: General
Condensateurs de répartition pour disjoncteurs à courant alternatif haute

tension –
Partie 1: Généralités
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.01; 31.060.70 ISBN 978-2-8322-3476-1

– 2 – IEC 62146-1:2013/AMD1:2016
© IEC 2016
FOREWORD
This amendment has been prepared by IEC technical committee 33: Power capacitors and
their applications.
The text of this amendment is based on the following documents:
FDIS Report on voting
33/583/FDIS 33/586/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
1 Scope
Add, after the last dashed point of Clause 1, the following new note and paragraph:
NOTE CIGRE Technical Brochure 368 [2] presents a study about the operating environment of voltage grading
capacitors applied to high-voltage circuit-breakers.
This standard does not apply to phase-to-earth capacitors installed on the circuit-breaker to
modify the Transient Recovery Voltage.
7.4 Minimum withstand value of mechanical bending load
Replace existing Subclause 7.4 by the following new text:
7.4.1 Capacitors mounted on air insulated circuit -breaker
The test bending moment M shall be calculated as follows:
c
m 1
 
M = 100+ ×g× ×l
 
C
2 0,7
 
where
M is in Nm;
c
l is the length of the capacitor in m;

----------
...