FprEN IEC 63522-4:2024
(Main)Electrical relays - Tests and measurements - Part 4: Dielectric strength test
Electrical relays - Tests and measurements - Part 4: Dielectric strength test
Relais électriques - Essais et mesurages - Partie 4: Essai de rigidité diélectrique
Električni releji - Preskusi in meritve - 7-4. del: Preskus dielektrične trdnosti
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2023
Električni releji - Preskusi in meritve - 7-4. del: Preskus dielektrične trdnosti
Electrical relays - Tests and Measurements - Part 7-4: Dielectric strength test
Ta slovenski standard je istoveten z: prEN IEC 61810-7-4:2023
ICS:
29.120.70 Releji Relays
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
94/879/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61810-7-4 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-07-07 2023-09-29
SUPERSEDES DOCUMENTS:
94/838/CD, 94/866/CC
IEC TC 94 : ELECTRICAL RELAYS
SECRETARIAT: SECRETARY:
Austria Mr Bernhard Spalt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 121,SC 121A
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Electrical relays - Tests and Measurements Part 7-4: Dielectric strength test
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
– 2 – IEC CDV 61810-7-4:2023 © IEC 2023
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 5
6 4 Test procedures . 7
7 5 Evaluation . 8
8 Annex T (normative) Test report . Error! Bookmark not defined.
9 Bibliography . 12
11 Table 1 – Dielectric strength – AC. Error! Bookmark not defined.
12 Table 2 – Dielectric strength – DC . Error! Bookmark not defined.
IEC CDV 61810-7-4:2023 © IEC 2023 – 3 –
15 INTERNATIONAL ELECTROTECHNICAL COMMISSION
16 ____________
18 Electrical Relays –
19 Tests and measurements
21 Part 7-4: Dielectric strength test
23 FOREWORD
24 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization
25 comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to p
26 2) romote international co-operation on all questions concerning standardization in the electrical and electronic
27 fields. To this end and in addition to other activities, IEC publishes International Standards, Technical
28 Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred
29 to as "IEC Publication(s)"). Their preparation is entrusted to technical committees; any IEC National
30 Committee interested in the subject dealt with may participate in this preparatory work. International,
31 governmental and non-governmental organizations liaising with the IEC also participate in this preparation.
32 IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with
33 conditions determined by agreement between the two organizations.
34 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
35 consensus of opinion on the relevant subjects since each technical committee has representation from all
36 interested IEC National Committees.
37 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
38 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
39 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
40 misinterpretation by any end user.
41 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
42 transparently to the maximum extent possible in their national and regional publications. Any divergence between
43 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
44 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
45 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
46 services carried out by independent certification bodies.
47 6) All users should ensure that they have the latest edition of this publication.
48 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
49 members of its technical committees and IEC National Committees for any personal injury, property damage or
50 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
51 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
52 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
53 indispensable for the correct application of this publication.
54 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
55 rights. IEC shall not be held responsible for identifying any or all such patent rights.
56 The International Standards of the IEC 61810 have been prepared by IEC technical committee
57 94: All-or-nothing electrical relays.
58 The text of this International Standard is based on the following documents:
CD CC
94/838/CD 94/866/CC
60 Full information on the voting for the approval of this International Standard can be found in the
61 report on voting indicated in the above table.
62 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
63 A list of all parts of IEC 61810 series, published under the general title Electromechanical
64 elementary relays, can be found on the IEC website.
– 4 – IEC CDV 61810-7-4:2023 © IEC 2023
65 This International Standard is to be used in conjunction with IEC 61810-1:2015.
66 The committee has decided that the contents of this document will remain unchanged until the
67 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
68 the specific document. At this date, the document will be
69 • reconfirmed,
70 • withdrawn,
71 • replaced by a revised edition, or
72 • amended.
IEC CDV 61810-7-4:2023 © IEC 2023 – 5 –
75 Electrical Relays –
76 Tests and measurements
78 Part 7-4: Dielectric strength test
82 1 Scope
83 This part of IEC 61810-7 is used for testing along with the appropriate severities and conditions
84 for measurements and tests designed to assess the ability of specimens to perform under
85 expected conditions of transportation, storage and all aspects of operational use.
86 The object of this test is to define a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.