Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

IEC 60674-3-1:2021 is available as IEC 60674-3-1:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60674-3-1:2021 gives the requirements for biaxially oriented polypropylene film having a smooth or rough surface, corona treated when required for vacuum metallization. The films are for use as dielectric in capacitors. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. Safety warning: It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner. This second edition cancels and replaces the first edition published in 1998 and Amendment 1:2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - this document has been completely revised editorially and technically and included in the IEC 60674 series of standards; - the test methods have been updated to reflect today’s state of the art.

Isolierfolien für elektrotechnische Zwecke - Teil 3: Anforderungen für einzelne Werkstoffe - Blatt 1: Biaxial orientierte Polypropylen-(PP)-Folien für Kondensatoren

Films plastiques à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 1: Films de polypropylène biorienté (PP) pour condensateurs

IEC 60674-3-1:2021 est disponible sous forme de IEC 60674-3-1:2021 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente. L'IEC 60674-3-1:2021 donne les exigences relatives aux films de polypropylène biorienté à surface lisse ou rugueuse, avec traitement par effet couronne, si cela est exigé, pour la métallisation sous vide. Les films sont utilisés comme diélectrique dans les condensateurs. Les matériaux conformes à la présente spécification satisfont à des niveaux établis de performance. Toutefois, le choix d’un matériau par un utilisateur pour une application spécifique repose sur les exigences réelles nécessaires pour obtenir des performances adéquates de l’application concernée, et non sur la seule présente spécification. Mise en garde relative à la sécurité: Il incombe à l’utilisateur des méthodes contenues ou citées en référence dans le présent document d’assurer qu’elles sont utilisées d’une manière sûre. Cette deuxième édition annule et remplace la première édition parue en 1998 ainsi que l’Amendement 1:2011. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - ce document a été entièrement revu sur le plan rédactionnel et technique et inclus dans les normes de la série IEC 60674; - les méthodes d’essai ont été mises à jour pour refléter l’état actuel de la technique.

Plastične folije za električne namene - 3. del: Specifikacije za posamezne materiale - 1. list: Dvoosno orientirana polipropilenska folija za kondenzatorje (IEC 60674-3-1:2021)

General Information

Status
Published
Publication Date
30-Sep-2021
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
01-Oct-2021
Completion Date
01-Oct-2021

Relations

Buy Standard

Standard
EN IEC 60674-3-1:2021
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN IEC 60674-3-1:2021
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2021
Nadomešča:
SIST EN 60674-3-1:2001
SIST EN 60674-3-1:2001/A1:2012
Plastične folije za električne namene - 3. del: Specifikacije za posamezne materiale
- 1. list: Dvoosno orientirana polipropilenska folija za kondenzatorje (IEC 60674-3-
1:2021)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet
1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:2021)
Isolierfolien für elektrotechnische Zwecke - Teil 3: Anforderungen für einzelne Werkstoffe
- Blatt 1: Biaxial orientierte Polypropylen-(PP)-Folien für Kondensatoren (IEC 60674-3-
1:2021)
Films plastiques à usages électriques - Partie 3: Spécifications pour matériaux
particuliers - Feuille 1: Films de polypropylène biorientés (PP) pour condensateurs (IEC
60674-3-1:2021)
Ta slovenski standard je istoveten z: EN IEC 60674-3-1:2021
ICS:
29.035.20 Plastični in gumeni izolacijski Plastics and rubber insulating
materiali materials
83.140.10 Filmi in folije Films and sheets
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60674-3-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2021
ICS 29.035.20 Supersedes EN 60674-3-1:1998 and all of its
amendments and corrigenda (if any)
English Version
Plastic films for electrical purposes - Part 3: Specifications for
individual materials - Sheet 1: Biaxially oriented polypropylene
(PP) film for capacitors
(IEC 60674-3-1:2021)
Films plastiques à usages électriques - Partie 3: Isolierfolien für elektrotechnische Zwecke - Teil 3:
Spécifications pour matériaux particuliers - Feuille 1: Films Anforderungen für einzelne Werkstoffe - Blatt 1: Biaxial
de polypropylène biorienté (PP) pour condensateurs orientierte Polypropylen-(PP)-Folien für Kondensatoren
(IEC 60674-3-1:2021) (IEC 60674-3-1:2021)
This European Standard was approved by CENELEC on 2021-09-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60674-3-1:2021 E

European foreword
The text of document 15/909/CDV, future edition 2 of IEC 60674-3-1, prepared by IEC/TC 15 “Solid
electrical insulating materials” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60674-3-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–06–29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–09–29
document have to be withdrawn
This document supersedes EN 60674-3-1:1998 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60674-3-1:2021 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60674-1 1980 Specification for plastic films for electrical EN 60674-1 1998
purposes. Part 1: Definitions and general
requirements
IEC 60674-2 2016 Specification for plastic films for electrical EN 60674-2 2017
purposes - Part 2: Methods of test

IEC 60674-3-1 ®
Edition 2.0 2021-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Plastic films for electrical purposes –

Part 3: Specifications for individual materials – Sheet 1: Biaxially oriented

polypropylene (PP) films for capacitors

Films plastiques à usages électriques –

Partie 3: Spécifications pour matériaux particuliers – Feuille 1: Films de

polypropylène biorienté (PP) pour condensateurs

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.035.20 ISBN 978-2-8322-1017-4

– 2 – IEC 60674-3-1:2021 © IEC 2021
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references. 6
3 Terms and definitions . 6
4 Classification . 6
5 Designation . 7
6 General requirements . 7
7 Dimensions . 7
7.1 Thickness . 7
7.2 Width . 8
7.3 Length/diameter . 8
8 Properties. 8
8.1 Physical properties . 8
8.2 Electric strength (DC test) . 9
8.3 Electrical weak spots . 9
8.4 Thermal endurance . 10
8.5 Wetting tension (types 1b + 1c, 2b + 2c and 3b + 3c only) . 10
8.6 Liquid absorption . 10
8.7 Compatibility with impregnants . 10
8.8 Dissipation factor under impregnated conditions . 10
8.9 Space factor . 11
9 Roll characteristics . 11
9.1 Windability . 11
9.2 Joins . 11
9.3 Roll width (overall width) . 12
9.4 Core . 12
9.5 Labelling . 12
Bibliography . 13

Table 1 – Physical properties . 8
Table 2 – Electric strength (DC test) for types 1, 2 and 3 . 9
Table 3 – Electrical weak spots for types 1, 2 and 3 . 10
Table 4 – Maximum number of joins within a roll (types 1, 2 and 3) . 11

IEC 60674-3-1:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PLASTIC FILMS FOR ELECTRICAL PURPOSES –

Part 3: Specifications for individual materials –
Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publi
...


SLOVENSKI STANDARD
01-december-2021
Nadomešča:
SIST EN 60674-3-1:2001
SIST EN 60674-3-1:2001/A1:2012
Plastične folije za električne namene - 3. del: Specifikacije za posamezne materiale
- 1. list: Dvoosno orientirana polipropilenska folija za kondenzatorje (IEC 60674-3-
1:2021)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet
1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:2021)
Isolierfolien für elektrotechnische Zwecke - Teil 3: Anforderungen für einzelne Werkstoffe
- Blatt 1: Biaxial orientierte Polypropylen-(PP)-Folien für Kondensatoren (IEC 60674-3-
1:2021)
Films plastiques à usages électriques - Partie 3: Spécifications pour matériaux
particuliers - Feuille 1: Films de polypropylène biorientés (PP) pour condensateurs (IEC
60674-3-1:2021)
Ta slovenski standard je istoveten z: EN IEC 60674-3-1:2021
ICS:
29.035.20 Plastični in gumeni izolacijski Plastics and rubber insulating
materiali materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60674-3-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2021
ICS 29.035.20 Supersedes EN 60674-3-1:1998 and all of its
amendments and corrigenda (if any)
English Version
Plastic films for electrical purposes - Part 3: Specifications for
individual materials - Sheet 1: Biaxially oriented polypropylene
(PP) film for capacitors
(IEC 60674-3-1:2021)
Films plastiques à usages électriques - Partie 3: Isolierfolien für elektrotechnische Zwecke - Teil 3:
Spécifications pour matériaux particuliers - Feuille 1: Films Anforderungen für einzelne Werkstoffe - Blatt 1: Biaxial
de polypropylène biorienté (PP) pour condensateurs orientierte Polypropylen-(PP)-Folien für Kondensatoren
(IEC 60674-3-1:2021) (IEC 60674-3-1:2021)
This European Standard was approved by CENELEC on 2021-09-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60674-3-1:2021 E

European foreword
The text of document 15/909/CDV, future edition 2 of IEC 60674-3-1, prepared by IEC/TC 15 “Solid
electrical insulating materials” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60674-3-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–06–29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–09–29
document have to be withdrawn
This document supersedes EN 60674-3-1:1998 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60674-3-1:2021 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60674-1 1980 Specification for plastic films for electrical EN 60674-1 1998
purposes. Part 1: Definitions and general
requirements
IEC 60674-2 2016 Specification for plastic films for electrical EN 60674-2 2017
purposes - Part 2: Methods of test

IEC 60674-3-1 ®
Edition 2.0 2021-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Plastic films for electrical purposes –

Part 3: Specifications for individual materials – Sheet 1: Biaxially oriented

polypropylene (PP) films for capacitors

Films plastiques à usages électriques –

Partie 3: Spécifications pour matériaux particuliers – Feuille 1: Films de

polypropylène biorienté (PP) pour condensateurs

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.035.20 ISBN 978-2-8322-1017-4

– 2 – IEC 60674-3-1:2021 © IEC 2021
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references. 6
3 Terms and definitions . 6
4 Classification . 6
5 Designation . 7
6 General requirements . 7
7 Dimensions . 7
7.1 Thickness . 7
7.2 Width . 8
7.3 Length/diameter . 8
8 Properties. 8
8.1 Physical properties . 8
8.2 Electric strength (DC test) . 9
8.3 Electrical weak spots . 9
8.4 Thermal endurance . 10
8.5 Wetting tension (types 1b + 1c, 2b + 2c and 3b + 3c only) . 10
8.6 Liquid absorption . 10
8.7 Compatibility with impregnants . 10
8.8 Dissipation factor under impregnated conditions . 10
8.9 Space factor . 11
9 Roll characteristics . 11
9.1 Windability . 11
9.2 Joins . 11
9.3 Roll width (overall width) . 12
9.4 Core . 12
9.5 Labelling . 12
Bibliography . 13

Table 1 – Physical properties . 8
Table 2 – Electric strength (DC test) for types 1, 2 and 3 . 9
Table 3 – Electrical weak spots for types 1, 2 and 3 . 10
Table 4 – Maximum number of joins within a roll (types 1, 2 and 3) . 11

IEC 60674-3-1:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PLASTIC FILMS FOR ELECTRICAL PURPOSES –

Part 3: Specifications for individual materials –
Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.