EN IEC 62769-101-2:2023
(Main)Field Device Integration (FDI)® - Part 101-2: Profiles - Foundation Fieldbus HSE
Field Device Integration (FDI)® - Part 101-2: Profiles - Foundation Fieldbus HSE
IEC 62769-101-2:2023 is available as IEC 62769-101-2:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-101-2:2023 specifies the IEC 62769 profile for IEC 61784‑1, CP 1/2 (Foundation™ Fieldbus HSE)[1]. [1] Foundation™ Fieldbus is the trade name of the non-profit consortium Fieldbus Foundation. This information is given for the convenience of users of this technical report and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.
Feldgeräteintegration (FDI)® - Teil 101-2: Profile - Foundation Fieldbus HSE
Intégration des appareils de terrain (FDI)® - Partie 101-2: Profils - Foundation Fieldbus HSE
IEC 62769-101-2:2023 est disponible sous forme de IEC 62769-101-2:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62769-101-2:2023 spécifie le profil de l'IEC 62769 pour le profil de communication CP 1/2 (Foundation™ Fieldbus HSE)[1] défini dans l'IEC 61784‑1. [1] Foundation™ Fieldbus est l'appellation commerciale du consortium Fieldbus Foundation, une organisation à but non lucratif. Cette information est donnée à l'intention des utilisateurs du présent rapport technique et ne signifie nullement que l'IEC approuve le détenteur des appellations commerciales ou l'emploi de ses produits. La conformité n'exige pas l'utilisation de l'appellation commerciale. L'utilisation de l'appellation commerciale exige l'autorisation du détenteur de l'appellation commerciale.
Integracija procesne naprave (FDI)® - 101-2. del: Profili - Osnovno procesno vodilo HSE (IEC 62769-101-2:2023)
Ta del standarda IEC 62769 določa profil IEC 62769 za IEC 61784-1, CP 1/2 (FOUNDATION™ Fieldbus HSE) 1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2023
Integracija procesne naprave (FDI)® - 101-2. del: Profili - Osnovno procesno vodilo
HSE (IEC 62769-101-2:2023)
Field Device Integration (FDI)® - Part 101-2: Profiles - Foundation Fieldbus HSE (IEC
62769-101-2:2023)
Feldgeräteintegration (FDI)® - Teil 101-2: Profile - Foundation Fieldbus HSE (IEC 62769
-101-2:2023)
Intégration des appareils de terrain (FDI)® - Partie 101-2: Profils - Foundation Fieldbus
HSE (IEC 62769-101-2:2023)
Ta slovenski standard je istoveten z: EN IEC 62769-101-2:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62769-101-2
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2023
ICS 25.040.40; 35.100.05 Supersedes EN IEC 62769-101-2:2021
English Version
Field Device Integration (FDI)® - Part 101-2: Profiles -
Foundation Fieldbus HSE
(IEC 62769-101-2:2023)
Intégration des appareils de terrain (FDI)® - Partie 101-2: Feldgeräteintegration (FDI)® - Teil 101-2: Profile -
Profils - Foundation Fieldbus HSE Foundation Fieldbus HSE
(IEC 62769-101-2:2023) (IEC 62769-101-2:2023)
This European Standard was approved by CENELEC on 2023-05-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-101-2:2023 E
European foreword
The text of document 65E/861/CDV, future edition 3 of IEC 62769-101-2, prepared by SC 65E
"Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62769-101-2:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-19
document have to be withdrawn
This document supersedes EN IEC 62769-101-2:2021 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62769-101-2:2023 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61784-1 - Industrial communication networks - Profiles EN IEC 61784-1 -
Part 1: Fieldbus profiles
IEC 61784-2 - Industrial communication networks - Profiles - EN IEC 61784-2 -
Part 2: Additional fieldbus profiles for real-
time networks based on
ISO/IEC/IEEE 8802-3
IEC 61804 series Function blocks (FB) for process control and EN IEC 61804 series
electronic device description language
(EDDL)
IEC 62541-6 - OPC Unified Architecture - Part 6: Mappings EN IEC 62541-6 -
IEC 62541-100 - OPC Unified Architecture - Part 100: Device EN 62541-100 -
Interface
IEC 62769-2 - Field Device Integration (FDI®) - Part 2: EN IEC 62769-2 -
Client
IEC 62769-3 - Field Device Integration (FDI®) - Part 3: EN IEC 62769-3 -
Server
IEC 62769-4 - Field Device Integration (FDI®) - Part 4: FDI - -
Packages
IEC 62769-5 - Field Device Integration (FDI®) - Part 5: FDI - -
Information Model
IEC 62769-6 - Field Device Integration (FDI®) - Part 6: FDI EN IEC 62769-6 -
Technology Mappings
IEC 62769-7 - Field Device Integration (FDI®) - Part 7: - -
Communication Devices
IEC 62769-101-1 - Field device Integration (FDI)® - Part 101-1: - -
Profiles - Foundation Fieldbus H1
IEC 62769-101-2 ®
Edition 3.0 2023-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE ®
Field Device Integration (FDI) –
Part 101-2: Profiles – Foundation Fieldbus HSE
®
Intégration des appareils de terrain (FDI) –
Partie 101-2: Profils – Foundation Fieldbus HSE
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05 ISBN 978-2-8322-6831-5
– 2 – IEC 62769-101-2:2023 © IEC 2023
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, abbreviated terms and acronyms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms and acronyms . 7
4 Conventions . 7
4.1 EDDL syntax . 7
4.2 XML syntax . 7
5 Profile for CP 1/2 (FOUNDATION™ HSE) . 8
5.1 General . 8
5.2 Catalog profile . 8
5.2.1 Protocol support file (Capability File) . 8
5.2.2 CommunicationProfile definition . 8
5.2.3 Profile device . 8
5.2.4 Protocol version information . 8
5.3 Associating a Package with a CP 1/2 device . 9
5.3.1 Device type identification mapping . 9
5.3.2 Device type revision mapping . 9
5.4 Information Model mapping . 9
5.4.1 ProtocolType definition . 9
5.4.2 DeviceType mapping . 9
5.4.3 FunctionalGroup Identification definition . 10
5.4.4 BlockType property mapping . 10
5.4.5 Mapping to Block ParameterSet . 11
5.5 Topology elements . 11
5.5.1 ConnectionPoint definition . 11
5.5.2 Communication Device definition . 12
5.5.3 Communication service provider definition . 14
5.5.4 Network definition . 14
5.6 Methods . 15 ®
5.6.1 Methods for FDI Communication Servers . 15
5.6.2 Methods for Gateways . 21
Annex A (normative) Topology scan schema . 22
A.1 General . 22
A.2 Target Namespace . 22
A.3 Network . 22
A.4 FoundationHSEAddressT . 22
A.5 FoundationHSEConnectionPointT . 22
A.6 FoundationHSENetworkT . 23
A.7 FoundationBlockIdentificationT . 24
A.8 FoundationIdentificationT . 24
Annex B (normative) Transfer service parameters . 26
Annex C (informative) Communication service arguments for Transfer Method . 27
Bibliography . 28
IEC 62769-101-2:2023 © IEC 2023 – 3 –
Table 1 – Capability File part . 8
Table 2 – CommunicationProfile definition . 8
Table 3 – Device type catalog mapping . 9
Table 4 – ProtocolType Foundation_HSE definition . 9
Table 5 – Inherited DeviceType property mapping . 10
Table 6 – Identification parameters . 10
Table 7 – Inherited BlockType property mapping. 11
Table 8 – ConnectionPointType ConnectionPoint_Foundation_HSE definition. 11
Table 9 – Communication device ParameterSet definition . 14
Table 10 – Method Connect arguments . 16
Table 11 – Method Disconect arguments . 16
Table 12 – Method Transfer arguments . 17
Table 13 – Method GetPublishedData arguments. 19
Table 14 – Method SetAddress arguments . 20
Table A.1 – Attributes of FoundationHSEConnectionPointT . 23
Table A.2 – Elements of FoundationHSEConnectionPointT . 23
Table A.3 – Elements of FoundationHSENetworkT . 24
Table A.4 – Attributes of FoundationBlockIdentificationT. 24
Table A.5 – Attributes of FoundationIdentificationT . 25
– 4 – IEC 62769-101-2:2023 © IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________ ®
FIELD DEVICE INTEGRATION (FDI ) –
Part 101-2: Profiles – Foundation Fieldbus HSE
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 62769-101-2 has been prepared by subcommittee 65E: Devices and integration in
enterprise systems, of IEC technical committee 65: Industrial-process measurement, control
and automation. It is an International Standard.
This third edition cancels and replaces the second edition published in 2020. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) added namespace to Annex A;
b) changed content type of cff file to application/vnd.ff.cff.
IEC 62769-101-2:2023 © IEC 2023 – 5 –
The text of this International Standard is based on the following documents:
Draft Report on voting
65E/861/CDV 65E/918/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts in the IEC 62769 series, published under the general title Field device ®
integration (FDI ), can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
– 6 – IEC 62769-101-2:2023 © IEC 2023 ®
FIELD DEVICE INTEGRATION (FDI ) –
Part 101-2: Profiles – Foundation Fieldbus HSE
1 Scope
This part of IEC 62769 specifies the IEC 62769 profile for IEC 61784-1, CP 1/2 (FOUNDATION™
Fieldbus HSE) .
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 61784-1, Industrial communication networks – Profiles – Part 1: Fieldbus Profiles
IEC 61784-2, Industrial communication networks – Profiles – Part 2: Additional fieldbus profiles
for real-time networks based on ISO/IEC 8802-3
IEC 61804 (all parts), Devices and integration in enterprise systems – Function blocks (FB) for
process control and Electronic Device Description Language (EDDL)
IEC 62541-6, OPC Unified Architecture – Part 6: Mappings
IEC 62541-100, OPC unified architecture – Part 100: Device Interface ®
IEC 62769-2, Field device integration (FDI ) – Part 2: Client ®
IEC 62769-3, Field device integration (FDI ) – Part 3: Server
® ®
IEC 62769-4, Field device integration (FDI ) – Part 4: FDI Packages ®
IEC 62769-5, Field device integration (FDI ) – Part 5: Information Model ®
IEC 62769-6, Field device integration (FDI ) – Part 6: Technology Mapping ®
IEC 62769-7, Field device integration (FDI ) – Part 7: Communication Devices ®
IEC 62769-101-1, Field device integration (FDI ) – Part 101-1: Profiles – Foundation Fieldbus
H1
___________
Foundation™ Fieldbus is the trade name of the non-profit consortium Fieldbus Foundation. This information is
given for the convenience of users of this technical report and does not constitute an endorsement by IEC of the
trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade
name requires permission of the trade name holder.
IEC 62769-101-2:2023 © IEC 2023 – 7 –
3 Terms, definitions, abbreviated terms and acronyms
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 61784-1,
IEC 61784-2, IEC 61804 (all parts), IEC 62541-100, IEC 62769-2, IEC 62769-3, IEC 62769-4,
IEC 62769-5, IEC 62769-6, IEC 62769-7 and IEC 62769-101-1 apply.
ISO and IEC maintain terminology databases for use in standardization at the following
addresses:
• ISO Online browsing platform: available at https://www.iso.org/obp
• IEC Electropedia: available at https://www.electropedia.org
3.2 Abbreviated terms and acronyms
For the purposes of this document, the following abbreviations apply:
CFF Common File format
CP communication profile (see IEC 61784-1 or IEC 61784-2)
CPF communication profile family (see IEC 61784-1 or IEC 61784-2)
EDD Electronic Device Description (see IEC 61804 series)
EDDL Electronic Device Description Language (see IEC 61804 series)
FB function block
IM Information Model
SMIB system management information base
VFD virtual field device
4 Conventions
4.1 EDDL syntax
®2
This document specifies content for the EDD component that is part of FDI Communication
Packages. EDDL syntax uses the font Courier New. EDDL syntax is used for method
signature, variable, data structure and component declarations.
4.2 XML syntax
XML syntax examples use the font Courier New. The XML syntax is used to describe XML
document schema.
Example:
___________
FDI is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given
for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark
holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires
permission of the trade name holder.
– 8 – IEC 62769-101-2:2023 © IEC 2023
5 Profile for CP 1/2 (FOUNDATION™ HSE)
5.1 General ®
This profile annex specifies the protocol specifics needed for FDI Packages describing
communication servers, gateways and devices.
Annex B defines the XML schema for Direct Access Services. Annex C provides an overview of
mapping PROFIBUS standard parameters to PA DIM.
5.2 Catalog profile
5.2.1 Protocol support file (Capability File) ®
Each CP 1/2 FDI Device Package shall contain a capability file. The capability file part is
described in Table 1.
Table 1 – Capability File part
Parameter Description
Content Type application/vnd.ff.cff
Root Namespace Not applicable
Source Relationship http://fdi-cooperation.com/2010/relationships/attachment-protocol
Filename Use file extension .CFH
5.2.2 CommunicationProfile definition
IEC 62769-4 defines a CommunicationProfileT string type for the Catalog XML schema. Table 2
defines the CP 1/2 specific values for this string.
Table 2 – CommunicationProfile definition
CommunicationProfile Description
foundation_hse CP 1/2 device type
5.2.3 Profile device
Not supported in this document.
5.2.4 Protocol version information
IEC 62769-4 defines an element type named InterfaceT for the Catalog XML Schema. Element
type InterfaceT contains an element named Version which is supposed to provide version
information about the applied communication protocol profile. The value follows the
IEC 62769-4 defined version information schema defined in element type VersionT.
The major version part of VersionT shall be set to the ITK_VER parameter. The minor and builds
parts shall be set to 0.
EXAMPLE For ITK_VER 5, the value for InterfaceT is 5.0.0.
IEC 62769-101-2:2023 © IEC 2023 – 9 –
5.3 Associating a Package with a CP 1/2 device
5.3.1 Device type identification mapping
CP 1/2 device types are uniquely identified by the parameters MANUFAC_ID, DEVICE_TYPE
and DEV_REV found in the Resource Block of the function block VFD. These parameters are ®
used to associate a given device instance to an FDI Device Package. These parameters are ®
mapped to the FDI Device Package Catalog according to Table 3.
Table 3 – Device type catalog mapping
Catalog Element CP Mapping
Manufacturer element of InterfaceT (IEC 62769-4) MANUFAC_ID
String format “0xdddd” where dddd is the
MANUFAC_ID number in hexadecimal format.
DeviceModel element of InterfaceT String format DEVICE_TYPE
“0xdddd” where dddd is the DEVICE_TYPE number in
String format “0xdddd” where dddd is the
hexadecimal format. (IEC 62769-4)
DEVICE_TYPE number in hexadecimal format.
a
DeviceRevision element
DEV_REV
ListOfSupportedDeviceRevisionsT (IEC 62769-4)
String format “x.0.0” where x is the DEV_REV in
decimal format (no leading zeros).
a
Conditional: Shall be available if the device exposes a Function block VFD.
5.3.2 Device type revision mapping
Each device type is identified per 5.3.1. A device may also include a parameter
COMPATIBILITY_REV from the Resource Block. This parameter specifies the lowest device
version (DEV_REV) that a new device can replace while maintaining compatibility with a prior ®
FDI Device Package.
5.4 Information Model mapping
5.4.1 ProtocolType definition
Table 4 defines the ProtocolType used to identify CP 1/2 network communications.
Table 4 – ProtocolType Foundation_HSE definition
Attribute Value
BrowseName Foundation_HSE
IsAbstract False
References NodeClass BrowseName DataType TypeDefinition ModellingRule
Inherits the properties of ProtocolType defined in IEC 62541-100.
5.4.2 DeviceType mapping
Each device type inherits the properties of DeviceType. The mapping of the inherited properties
from DeviceType is defined in Table 5.
– 10 – IEC 62769-101-2:2023 © IEC 2023
Table 5 – Inherited DeviceType property mapping
Property CP Mapping
SerialNumber DEV_ID (System Management Information Base)
RevisionCounter -1 (not defined)
Manufacturer ®
String obtained from FDI package catalog
(ManufacturerName from PackageT)
Model ®
String obtained from FDI package catalog (Name of
DeviceTypeT, which is a localized name)
a
DeviceManual
entry text string (not supported)
b
DeviceRevision
DEV_REV (Resource Block)
SoftwareRevision SOFTWARE_REV (if available, otherwise empty
string)
HardwareRevision HARDWARE_REV (if available, otherwise empty
string)
a ®
Device manuals are exposed as attachments of the FDI Device Package.
b
Conditional: Shall be available if the device exposes a Function block VFD.
5.4.3 FunctionalGroup Identification definition ®
As defined in IEC 62541-100, each device representation in the FDI Server hosted Information
Model shall contain a protocol specific FunctionalGroup called Identification. This
FunctionalGroup organizes variables found in the Resource Block of the device type instance.
The FunctionalGroup Identification for CP 1/2 is defined in Table 6.
Table 6 – Identification parameters
BrowseName VariableType Optional/Mandatory
MANUFAC_ID UInt32 Mandatory
DEV_TYPE UInt16 Mandatory
a
DEV_REV UInt8
Conditional
HARDWARE_REV String Optional
SOFTWARE_REV String Optional
COMPATIBILITY_REV UInt8 Optional
CAPABILITY_LEV UInt8 Optional
a
ITK_VER UInt16
Conditional
SIF_ITK_VER UInt16 Optional
FD_VER UInt16 Optional
a
Conditional: Shall be available if the device exposes a Function block VFD.
5.4.4 BlockType property mapping
CP 1/2 device types are block-oriented according to IEC 62541-100. IEC 62769-5 specifies the
mapping of EDDL BLOCK_A elements to block types and instances.
The BLOCK_A maps as a subtype of the topology element BlockType and inherits the properties
as per IEC 62541-100. The mapping of the inherited properties of BlockType is specified in
Table 7.
IEC 62769-101-2:2023 © IEC 2023 – 11 –
Table 7 – Inherited BlockType property mapping
Property CP Mapping (Block’s ParameterSet)
RevisionCounter ST_REV
ActualMode MODE_BLK.ACTUAL
PermittedMode MODE_BLK.PERMITTED
NormalMode MODE_BLK.NORMAL
TargetMode MODE_BLK.TARGET
5.4.5 Mapping to Block ParameterSet
The ParameterSet is relative to each Block. The ParameterSet includes the
CHARACTERISTICS records of the block that contains all the parameters found in the
PARAMETERS, LOCAL_PARAMETERS and LIST_ITEMS.
The browse name of the parameters found in the PARAMETERS and LOCAL_PARAMETERS
is the member name in the respective lists. For example, ST_REV is the browse name of the
Static Revision parameter. LIST_ITEMS do not have member names; therefore, the browse
name of each LIST in the LIST_ITEMS is the item name of the list.
5.5 Topology elements
5.5.1 ConnectionPoint definition
The ConnectionPoint type ConnectionPoint_Foundation_HSE shall be used to identify CP 1/2
network communication and is defined in Table 8. The ConnectionPoint_Foundation_HSE type
is a sub type of the abstract type ConnectionPointType defined in IEC 62541-100.
The Address property can be an IPv4 or IPv6 address. For IPv4 addresses, the address shall
be stored in the last 4 octets and all other octets shall be set to zero.
The OrdinalNumber property reflects the position of the VFD within the SMIB VFD list. For
devices exposing multiple FB VFDs the OrdinalNumber property is mandatory to address the
FB VFD. For devices with a single FB VFD the OrdinalNumber property can be omitted. Devices
exposed as instances of type DeviceType define their Connection points as components. Hence
Devices with multiple FB VFDs shall contain multiple Connection points, one per FB VFD.
Table 8 – ConnectionPointType ConnectionPoint_Foundation_HSE definition
Attribute Value
BrowseName ConnectionPoint_Foundation_HSE
IsAbstract False
References NodeClass BrowseName DataType TypeDefinition ModellingRule
Inherits the properties of ConnectionPointType defined in IEC 62541-100.
HasProperty Variable Address Octet[16] PropertyType Mandatory
HasProp
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...